Commit e24a04c4 authored by Mark Brown's avatar Mark Brown Committed by Liam Girdwood
Browse files

regulator: Implement WM831x BuckWise DC-DC convertor DVS support 



The BuckWise DC-DC convertors in WM831x devices support switching to
a second output voltage using the logic level on one of the device
pins. This is intended to allow rapid voltage switching for uses like
cpufreq, replacing the I2C or SPI write used to configure the voltage
of the regulator with a much faster GPIO status change.

This is implemented by keeping the DVS voltage configured as the
maximum voltage permitted for the regulator. If a request is made
for the maximum voltage then the GPIO is used to switch to the DVS
voltage, otherwise the normal ON voltage is updated and used. This
follows the idiom used by most cpufreq drivers, which drop the
minimum voltage as the core frequency is dropped but use a constant
maximum - raising the voltage should normally be fast, but lowering
it may be slower.

Configuration of the DVS MFP on the device should be done externally,
for example via OTP.

Support is present in the hardware for monitoring the status of the
transition using a second GPIO. This is not currently implemented
but platform data is provided for it - the driver currently assumes
that the device will be configured to transition immediately - but
platform data is provided to reduce merge issues once it is.

Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: default avatarLiam Girdwood <lrg@slimlogic.co.uk>
parent 27f37e4b

drivers/regulator/wm831x-dcdc.c

+189 −18
Original line number Diff line number Diff line
@@ -19,6 +19,8 @@ 
#include <linux/i2c.h>

#include <linux/platform_device.h>

#include <linux/regulator/driver.h>

#include <linux/regulator/machine.h>

#include <linux/gpio.h>



#include <linux/mfd/wm831x/core.h>

#include <linux/mfd/wm831x/regulator.h>
@@ -39,6 +41,7 @@ 
#define WM831X_DCDC_CONTROL_2     1

#define WM831X_DCDC_ON_CONFIG     2

#define WM831X_DCDC_SLEEP_CONTROL 3

#define WM831X_DCDC_DVS_CONTROL   4



/*

 * Shared
@@ -50,6 +53,10 @@ struct wm831x_dcdc { 
	int base;

	struct wm831x *wm831x;

	struct regulator_dev *regulator;

	int dvs_gpio;

	int dvs_gpio_state;

	int on_vsel;

	int dvs_vsel;

};



static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
@@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, 
	return -EINVAL;

}



static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,

static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,

					   int min_uV, int max_uV)

{

	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);

	struct wm831x *wm831x = dcdc->wm831x;

	u16 vsel;



	if (min_uV < 600000)
@@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, 
	if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)

		return -EINVAL;



	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);

	return vsel;

}



static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,

					   int min_uV, int max_uV)

{

	u16 vsel;



	if (max_uV < 600000 || max_uV > 1800000)

		return -EINVAL;



	vsel = ((max_uV - 600000) / 12500) + 8;



	if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||

	    wm831x_buckv_list_voltage(rdev, vsel) < max_uV)

		return -EINVAL;



	return vsel;

}



static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)

{

	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);



	if (state == dcdc->dvs_gpio_state)

		return 0;



	dcdc->dvs_gpio_state = state;

	gpio_set_value(dcdc->dvs_gpio, state);



	/* Should wait for DVS state change to be asserted if we have

	 * a GPIO for it, for now assume the device is configured

	 * for the fastest possible transition.

	 */



	return 0;

}



static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,

				    int min_uV, int max_uV)

{

	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);

	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;

	struct wm831x *wm831x = dcdc->wm831x;

	int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;

	int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;

	int vsel, ret;



	vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);

	if (vsel < 0)

		return vsel;



	/* If this value is already set then do a GPIO update if we can */

	if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)

		return wm831x_buckv_set_dvs(rdev, 0);



	if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)

		return wm831x_buckv_set_dvs(rdev, 1);



	/* Always set the ON status to the minimum voltage */

	ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);

	if (ret < 0)

		return ret;

	dcdc->on_vsel = vsel;



	return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);

	if (!dcdc->dvs_gpio)

		return ret;



	/* Kick the voltage transition now */

	ret = wm831x_buckv_set_dvs(rdev, 0);

	if (ret < 0)

		return ret;



	/* Set the high voltage as the DVS voltage.  This is optimised

	 * for CPUfreq usage, most processors will keep the maximum

	 * voltage constant and lower the minimum with the frequency. */

	vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);

	if (vsel < 0) {

		/* This should never happen - at worst the same vsel

		 * should be chosen */

		WARN_ON(vsel < 0);

		return 0;

	}



	/* Don't bother if it's the same VSEL we're already using */

	if (vsel == dcdc->on_vsel)

		return 0;



	ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);

	if (ret == 0)

		dcdc->dvs_vsel = vsel;

	else

		dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",

			 ret);



	return 0;

}



static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,

					    int uV)

{

	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);

	struct wm831x *wm831x = dcdc->wm831x;

	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;

	int vsel;



	vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);

	if (vsel < 0)

		return vsel;



	return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);

	return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);

}



static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)

{

	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);

	struct wm831x *wm831x = dcdc->wm831x;

	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;

	int val;



	val = wm831x_reg_read(wm831x, reg);

	if (val < 0)

		return val;



	return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);

	if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)

		return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);

	else

		return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);

}



/* Current limit options */
@@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = { 
	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,

};



/*

 * Set up DVS control.  We just log errors since we can still run

 * (with reduced performance) if we fail.

 */

static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,

					    struct wm831x_buckv_pdata *pdata)

{

	struct wm831x *wm831x = dcdc->wm831x;

	int ret;

	u16 ctrl;



	if (!pdata || !pdata->dvs_gpio)

		return;



	switch (pdata->dvs_control_src) {

	case 1:

		ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;

		break;

	case 2:

		ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;

		break;

	default:

		dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",

			pdata->dvs_control_src, dcdc->name);

		return;

	}



	ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,

			      WM831X_DC1_DVS_SRC_MASK, ctrl);

	if (ret < 0) {

		dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",

			dcdc->name, ret);

		return;

	}



	ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");

	if (ret < 0) {

		dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",

			dcdc->name, ret);

		return;

	}



	/* gpiolib won't let us read the GPIO status so pick the higher

	 * of the two existing voltages so we take it as platform data.

	 */

	dcdc->dvs_gpio_state = pdata->dvs_init_state;



	ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);

	if (ret < 0) {

		dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",

			dcdc->name, ret);

		gpio_free(pdata->dvs_gpio);

		return;

	}



	dcdc->dvs_gpio = pdata->dvs_gpio;

}



static __devinit int wm831x_buckv_probe(struct platform_device *pdev)

{

	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
@@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) 
	dcdc->desc.ops = &wm831x_buckv_ops;

	dcdc->desc.owner = THIS_MODULE;



	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);

	if (ret < 0) {

		dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);

		goto err;

	}

	dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;



	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);

	if (ret < 0) {

		dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);

		goto err;

	}

	dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;



	if (pdata->dcdc[id])

		wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);



	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,

					     pdata->dcdc[id], dcdc);

	if (IS_ERR(dcdc->regulator)) {
@@ -422,6 +589,8 @@ err_uv: 
err_regulator:

	regulator_unregister(dcdc->regulator);

err:

	if (dcdc->dvs_gpio)

		gpio_free(dcdc->dvs_gpio);

	kfree(dcdc);

	return ret;

}
@@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev) 
	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);

	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);

	regulator_unregister(dcdc->regulator);

	if (dcdc->dvs_gpio)

		gpio_free(dcdc->dvs_gpio);

	kfree(dcdc);



	return 0;

include/linux/mfd/wm831x/pdata.h

+17 −0
Original line number Diff line number Diff line
@@ -41,6 +41,23 @@ struct wm831x_battery_pdata { 
	int timeout;        /** Charge cycle timeout, in minutes */

};



/**

 * Configuration for the WM831x DC-DC BuckWise convertors.  This

 * should be passed as driver_data in the regulator_init_data.

 *

 * Currently all the configuration is for the fast DVS switching

 * support of the devices.  This allows MFPs on the device to be

 * configured as an input to switch between two output voltages,

 * allowing voltage transitions without the expense of an access over

 * I2C or SPI buses.

 */

struct wm831x_buckv_pdata {

	int dvs_gpio;        /** CPU GPIO to use for DVS switching */

	int dvs_control_src; /** Hardware DVS source to use (1 or 2) */

	int dvs_init_state;  /** DVS state to expect on startup */

	int dvs_state_gpio;  /** CPU GPIO to use for monitoring status */

};



/* Sources for status LED configuration.  Values are register values

 * plus 1 to allow for a zero default for preserve.

 */

CRA Git | Maintained and supported by SUSTech CRA and CCSE