[ALSA] usb-audio support for Turtle Beach Roadie (e217e30c) · Commits · 戴 / test

From: Sam Revitch <sam.revitch@gmail.com>Recently a Turtle Beach Audio Advantage Roadie device ended up in my possession. It seems to work with the snd-usb-audio driver, but only using the headphone jack in 2-channel mode. The device has a DIN connector carrying six more channels that are otherwise silent. C-Media has freely available documentation for the CM106 chip around which this device is based, and enabling 8-channel output, or 6-channel output with the headphone jack following the front pair is a matter of setting one of its registers. Attached is a patch to try to enable 5.1 output mode at probe time. It seems to work correctly with my device. There is quite list of other configurables for this device that might deserve controls. Signed-off-by:

Takashi Iwai <tiwai@suse.de> Signed-off-by:

Jaroslav Kysela <perex@suse.cz>

sound/usb/usbaudio.c

+32 −0

Original line number	Diff line number	Diff line
		@@ -3095,6 +3095,32 @@ static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
		return 0;
		}

		/*
		* C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
		* documented in the device's data sheet.
		*/
		static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
		{
		u8 buf[4];
		buf[0] = 0x20;
		buf[1] = value & 0xff;
		buf[2] = (value >> 8) & 0xff;
		buf[3] = reg;
		return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
		USB_DIR_OUT \| USB_TYPE_CLASS \| USB_RECIP_ENDPOINT,
		0, 0, &buf, 4, 1000);
		}

		static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
		{
		/*
		* Enable line-out driver mode, set headphone source to front
		* channels, enable stereo mic.
		*/
		return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
		}


		/*
		* Setup quirks
		*/
		@@ -3365,6 +3391,12 @@ static void snd_usb_audio_probe(struct usb_device dev,
		goto __err_val;
		}

		/* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
		if (id == USB_ID(0x10f5, 0x0200)) {
		if (snd_usb_cm106_boot_quirk(dev) < 0)
		goto __err_val;
		}

		/*
		* found a config. now register to ALSA
		*/

Admin message