Commit e190f57d authored by Álvaro Fernández Rojas's avatar Álvaro Fernández Rojas Committed by Pavel Machek
Browse files

leds-bcm6328: support second hw blinking interval 



Right now the driver uses only 3 LED modes:
0: On
1: HW Blinking (Interval 1)
3: Off

However, the controller supports a second HW blinking interval, which results
in 4 possible LED modes:
0: On
1: HW Blinking (Interval 1)
2: HW Blinking (Interval 2)
3: Off

Signed-off-by: default avatarÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
parent b5684a73

drivers/leds/leds-bcm6328.c

+75 −22
Original line number Diff line number Diff line
@@ -24,12 +24,17 @@ 


#define BCM6328_LED_MAX_COUNT		24

#define BCM6328_LED_DEF_DELAY		500

#define BCM6328_LED_INTERVAL_MS		20



#define BCM6328_LED_INTV_MASK		0x3f

#define BCM6328_LED_FAST_INTV_SHIFT	6

#define BCM6328_LED_FAST_INTV_MASK	(BCM6328_LED_INTV_MASK << \

					 BCM6328_LED_FAST_INTV_SHIFT)

#define BCM6328_LED_BLINK_DELAYS	2

#define BCM6328_LED_BLINK_MS		20



#define BCM6328_LED_BLINK_MASK		0x3f

#define BCM6328_LED_BLINK1_SHIFT	0

#define BCM6328_LED_BLINK1_MASK		(BCM6328_LED_BLINK_MASK << \

					 BCM6328_LED_BLINK1_SHIFT)

#define BCM6328_LED_BLINK2_SHIFT	6

#define BCM6328_LED_BLINK2_MASK		(BCM6328_LED_BLINK_MASK << \

					 BCM6328_LED_BLINK2_SHIFT)

#define BCM6328_SERIAL_LED_EN		BIT(12)

#define BCM6328_SERIAL_LED_MUX		BIT(13)

#define BCM6328_SERIAL_LED_CLK_NPOL	BIT(14)
@@ -45,8 +50,8 @@ 


#define BCM6328_LED_MODE_MASK		3

#define BCM6328_LED_MODE_ON		0

#define BCM6328_LED_MODE_FAST		1

#define BCM6328_LED_MODE_BLINK		2

#define BCM6328_LED_MODE_BLINK1		1

#define BCM6328_LED_MODE_BLINK2		2

#define BCM6328_LED_MODE_OFF		3

#define BCM6328_LED_SHIFT(X)		((X) << 1)
@@ -127,12 +132,18 @@ static void bcm6328_led_set(struct led_classdev *led_cdev, 
	unsigned long flags;



	spin_lock_irqsave(led->lock, flags);

	*(led->blink_leds) &= ~BIT(led->pin);



	/* Remove LED from cached HW blinking intervals */

	led->blink_leds[0] &= ~BIT(led->pin);

	led->blink_leds[1] &= ~BIT(led->pin);



	/* Set LED on/off */

	if ((led->active_low && value == LED_OFF) ||

	    (!led->active_low && value != LED_OFF))

		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);

	else

		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);



	spin_unlock_irqrestore(led->lock, flags);

}
@@ -140,8 +151,8 @@ static unsigned long bcm6328_blink_delay(unsigned long delay) 
{

	unsigned long bcm6328_delay;



	bcm6328_delay = delay + BCM6328_LED_INTERVAL_MS / 2;

	bcm6328_delay = bcm6328_delay / BCM6328_LED_INTERVAL_MS;

	bcm6328_delay = delay + BCM6328_LED_BLINK_MS / 2;

	bcm6328_delay = bcm6328_delay / BCM6328_LED_BLINK_MS;

	if (bcm6328_delay == 0)

		bcm6328_delay = 1;
@@ -168,28 +179,68 @@ static int bcm6328_blink_set(struct led_classdev *led_cdev, 
		return -EINVAL;

	}



	if (delay > BCM6328_LED_INTV_MASK) {

	if (delay > BCM6328_LED_BLINK_MASK) {

		dev_dbg(led_cdev->dev,

			"fallback to soft blinking (delay > %ums)\n",

			BCM6328_LED_INTV_MASK * BCM6328_LED_INTERVAL_MS);

			BCM6328_LED_BLINK_MASK * BCM6328_LED_BLINK_MS);

		return -EINVAL;

	}



	spin_lock_irqsave(led->lock, flags);

	if (*(led->blink_leds) == 0 ||

	    *(led->blink_leds) == BIT(led->pin) ||

	    *(led->blink_delay) == delay) {

	/*

	 * Check if any of the two configurable HW blinking intervals is

	 * available:

	 *   1. No LEDs assigned to the HW blinking interval.

	 *   2. Only this LED is assigned to the HW blinking interval.

	 *   3. LEDs with the same delay assigned.

	 */

	if (led->blink_leds[0] == 0 ||

	    led->blink_leds[0] == BIT(led->pin) ||

	    led->blink_delay[0] == delay) {

		unsigned long val;



		*(led->blink_leds) |= BIT(led->pin);

		*(led->blink_delay) = delay;

		/* Add LED to the first HW blinking interval cache */

		led->blink_leds[0] |= BIT(led->pin);



		/* Remove LED from the second HW blinking interval cache */

		led->blink_leds[1] &= ~BIT(led->pin);



		/* Cache first HW blinking interval delay */

		led->blink_delay[0] = delay;



		/* Update the delay for the first HW blinking interval */

		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);

		val &= ~BCM6328_LED_FAST_INTV_MASK;

		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);

		val &= ~BCM6328_LED_BLINK1_MASK;

		val |= (delay << BCM6328_LED_BLINK1_SHIFT);

		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);



		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);

		/* Set the LED to first HW blinking interval */

		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK1);



		rc = 0;

	} else if (led->blink_leds[1] == 0 ||

		   led->blink_leds[1] == BIT(led->pin) ||

		   led->blink_delay[1] == delay) {

		unsigned long val;



		/* Remove LED from the first HW blinking interval */

		led->blink_leds[0] &= ~BIT(led->pin);



		/* Add LED to the second HW blinking interval */

		led->blink_leds[1] |= BIT(led->pin);



		/* Cache second HW blinking interval delay */

		led->blink_delay[1] = delay;



		/* Update the delay for the second HW blinking interval */

		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);

		val &= ~BCM6328_LED_BLINK2_MASK;

		val |= (delay << BCM6328_LED_BLINK2_SHIFT);

		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);



		/* Set the LED to second HW blinking interval */

		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK2);



		rc = 0;

	} else {

		dev_dbg(led_cdev->dev,
@@ -358,11 +409,13 @@ static int bcm6328_leds_probe(struct platform_device *pdev) 
	if (!lock)

		return -ENOMEM;



	blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL);

	blink_leds = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,

				  sizeof(*blink_leds), GFP_KERNEL);

	if (!blink_leds)

		return -ENOMEM;



	blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL);

	blink_delay = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,

				   sizeof(*blink_delay), GFP_KERNEL);

	if (!blink_delay)

		return -ENOMEM;

CRA Git | Maintained and supported by SUSTech CRA and CCSE