Commit e13dbc4f authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'mlxsw-PFC-and-headroom-selftests' 

Petr Machata says:

====================
mlxsw: PFC and headroom selftests

Recent changes in the headroom management code made it clear that an
automated way of testing this functionality is needed. This patchset brings
two tests: a synthetic headroom behavior test, which verifies mechanics of
headroom management. And a PFC test, which verifies whether this behavior
actually translates into a working lossless configuration.

Both of these tests rely on mlnx_qos[1], a tool that interfaces with Linux
DCB API. The tool was originally written to work with Mellanox NICs, but
does not actually rely on anything Mellanox-specific, and can be used for
mlxsw as well as for any other NIC-like driver. Unlike Open LLDP it does
support buffer commands and permits a fire-and-forget approach to
configuration, which makes it very handy for writing of selftests.

Patches #1-#3 extend the selftest devlink_lib.sh in various ways. Patch #4
then adds a helper wrapper for mlnx_qos to mlxsw's qos_lib.sh.

Patch #5 adds a test for management of port headroom.

Patch #6 adds a PFC test.

[1] https://github.com/Mellanox/mlnx-tools/


====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 611ba753 bfa80478

tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh

+9 −0
Original line number Diff line number Diff line
@@ -147,17 +147,26 @@ switch_create() 


	# Make sure that ingress quotas are smaller than egress so that there is

	# room for both streams of traffic to be admitted to shared buffer.

	devlink_pool_size_thtype_save 0

	devlink_pool_size_thtype_set 0 dynamic 10000000

	devlink_pool_size_thtype_save 4

	devlink_pool_size_thtype_set 4 dynamic 10000000



	devlink_port_pool_th_save $swp1 0

	devlink_port_pool_th_set $swp1 0 6

	devlink_tc_bind_pool_th_save $swp1 1 ingress

	devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6



	devlink_port_pool_th_save $swp2 0

	devlink_port_pool_th_set $swp2 0 6

	devlink_tc_bind_pool_th_save $swp2 2 ingress

	devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6



	devlink_tc_bind_pool_th_save $swp3 1 egress

	devlink_tc_bind_pool_th_set $swp3 1 egress 4 7

	devlink_tc_bind_pool_th_save $swp3 2 egress

	devlink_tc_bind_pool_th_set $swp3 2 egress 4 7

	devlink_port_pool_th_save $swp3 4

	devlink_port_pool_th_set $swp3 4 7

}

tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh

0 → 100755
+379 −0
Original line number Diff line number Diff line 
#!/bin/bash

# SPDX-License-Identifier: GPL-2.0



ALL_TESTS="

	test_defaults

	test_dcb_ets

	test_mtu

	test_pfc

	test_int_buf

	test_tc_priomap

	test_tc_mtu

	test_tc_sizes

	test_tc_int_buf

"



lib_dir=$(dirname $0)/../../../net/forwarding



NUM_NETIFS=0

source $lib_dir/lib.sh

source $lib_dir/devlink_lib.sh

source qos_lib.sh



swp=$NETIF_NO_CABLE



cleanup()

{

	pre_cleanup

}



get_prio_pg()

{

	__mlnx_qos -i $swp | sed -n '/^PFC/,/^[^[:space:]]/p' |

		grep buffer | sed 's/ \+/ /g' | cut -d' ' -f 2-

}



get_prio_pfc()

{

	__mlnx_qos -i $swp | sed -n '/^PFC/,/^[^[:space:]]/p' |

		grep enabled | sed 's/ \+/ /g' | cut -d' ' -f 2-

}



get_prio_tc()

{

	__mlnx_qos -i $swp | sed -n '/^tc/,$p' |

		awk '/^tc/ { TC = $2 }

		     /priority:/ { PRIO[$2]=TC }

		     END {

			for (i in PRIO)

			    printf("%d ", PRIO[i])

		     }'

}



get_buf_size()

{

	local idx=$1; shift



	__mlnx_qos -i $swp | grep Receive | sed 's/.*: //' | cut -d, -f $((idx + 1))

}



get_tot_size()

{

	__mlnx_qos -i $swp | grep Receive | sed 's/.*total_size=//'

}



check_prio_pg()

{

	local expect=$1; shift



	local current=$(get_prio_pg)

	test "$current" = "$expect"

	check_err $? "prio2buffer is '$current', expected '$expect'"

}



check_prio_pfc()

{

	local expect=$1; shift



	local current=$(get_prio_pfc)

	test "$current" = "$expect"

	check_err $? "prio PFC is '$current', expected '$expect'"

}



check_prio_tc()

{

	local expect=$1; shift



	local current=$(get_prio_tc)

	test "$current" = "$expect"

	check_err $? "prio_tc is '$current', expected '$expect'"

}



__check_buf_size()

{

	local idx=$1; shift

	local expr=$1; shift

	local what=$1; shift



	local current=$(get_buf_size $idx)

	((current $expr))

	check_err $? "${what}buffer $idx size is '$current', expected '$expr'"

	echo $current

}



check_buf_size()

{

	__check_buf_size "$@" > /dev/null

}



test_defaults()

{

	RET=0



	check_prio_pg "0 0 0 0 0 0 0 0 "

	check_prio_tc "0 0 0 0 0 0 0 0 "

	check_prio_pfc "0 0 0 0 0 0 0 0 "



	log_test "Default headroom configuration"

}



test_dcb_ets()

{

	RET=0



	__mlnx_qos -i $swp --prio_tc=0,2,4,6,1,3,5,7 > /dev/null



	check_prio_pg "0 2 4 6 1 3 5 7 "

	check_prio_tc "0 2 4 6 1 3 5 7 "

	check_prio_pfc "0 0 0 0 0 0 0 0 "



	__mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null



	check_prio_pg "0 0 0 0 0 0 0 0 "

	check_prio_tc "0 0 0 0 0 0 0 0 "



	__mlnx_qos -i $swp --prio2buffer=1,3,5,7,0,2,4,6 &> /dev/null

	check_fail $? "prio2buffer accepted in DCB mode"



	log_test "Configuring headroom through ETS"

}



test_mtu()

{

	local what=$1; shift

	local buf0size_2

	local buf0size



	RET=0

	buf0size=$(__check_buf_size 0 "> 0")



	mtu_set $swp 3000

	buf0size_2=$(__check_buf_size 0 "> $buf0size" "MTU 3000: ")

	mtu_restore $swp



	mtu_set $swp 6000

	check_buf_size 0 "> $buf0size_2" "MTU 6000: "

	mtu_restore $swp



	check_buf_size 0 "== $buf0size"



	log_test "${what}MTU impacts buffer size"

}



test_tc_mtu()

{

	# In TC mode, MTU still impacts the threshold below which a buffer is

	# not permitted to go.



	tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M

	test_mtu "TC: "

	tc qdisc delete dev $swp root

}



test_pfc()

{

	RET=0



	__mlnx_qos -i $swp --prio_tc=0,0,0,0,0,1,2,3 > /dev/null



	local buf0size=$(get_buf_size 0)

	local buf1size=$(get_buf_size 1)

	local buf2size=$(get_buf_size 2)

	local buf3size=$(get_buf_size 3)

	check_buf_size 0 "> 0"

	check_buf_size 1 "> 0"

	check_buf_size 2 "> 0"

	check_buf_size 3 "> 0"

	check_buf_size 4 "== 0"

	check_buf_size 5 "== 0"

	check_buf_size 6 "== 0"

	check_buf_size 7 "== 0"



	log_test "Buffer size sans PFC"



	RET=0



	__mlnx_qos -i $swp --pfc=0,0,0,0,0,1,1,1 --cable_len=0 > /dev/null



	check_prio_pg "0 0 0 0 0 1 2 3 "

	check_prio_pfc "0 0 0 0 0 1 1 1 "

	check_buf_size 0 "== $buf0size"

	check_buf_size 1 "> $buf1size"

	check_buf_size 2 "> $buf2size"

	check_buf_size 3 "> $buf3size"



	local buf1size=$(get_buf_size 1)

	check_buf_size 2 "== $buf1size"

	check_buf_size 3 "== $buf1size"



	log_test "PFC: Cable length 0"



	RET=0



	__mlnx_qos -i $swp --pfc=0,0,0,0,0,1,1,1 --cable_len=1000 > /dev/null



	check_buf_size 0 "== $buf0size"

	check_buf_size 1 "> $buf1size"

	check_buf_size 2 "> $buf1size"

	check_buf_size 3 "> $buf1size"



	log_test "PFC: Cable length 1000"



	RET=0



	__mlnx_qos -i $swp --pfc=0,0,0,0,0,0,0,0 --cable_len=0 > /dev/null

	__mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null



	check_prio_pg "0 0 0 0 0 0 0 0 "

	check_prio_tc "0 0 0 0 0 0 0 0 "

	check_buf_size 0 "> 0"

	check_buf_size 1 "== 0"

	check_buf_size 2 "== 0"

	check_buf_size 3 "== 0"

	check_buf_size 4 "== 0"

	check_buf_size 5 "== 0"

	check_buf_size 6 "== 0"

	check_buf_size 7 "== 0"



	log_test "PFC: Restore defaults"

}



test_tc_priomap()

{

	RET=0



	__mlnx_qos -i $swp --prio_tc=0,1,2,3,4,5,6,7 > /dev/null

	check_prio_pg "0 1 2 3 4 5 6 7 "



	tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M

	check_prio_pg "0 0 0 0 0 0 0 0 "



	__mlnx_qos -i $swp --prio2buffer=1,3,5,7,0,2,4,6 > /dev/null

	check_prio_pg "1 3 5 7 0 2 4 6 "



	tc qdisc delete dev $swp root

	check_prio_pg "0 1 2 3 4 5 6 7 "



	# Clean up.

	tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M

	__mlnx_qos -i $swp --prio2buffer=0,0,0,0,0,0,0,0 > /dev/null

	tc qdisc delete dev $swp root

	__mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null



	log_test "TC: priomap"

}



test_tc_sizes()

{

	local cell_size=$(devlink_cell_size_get)

	local size=$((cell_size * 1000))



	RET=0



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 &> /dev/null

	check_fail $? "buffer_size should fail before qdisc is added"



	tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null

	check_err $? "buffer_size should pass after qdisc is added"

	check_buf_size 0 "== $size" "set size: "



	mtu_set $swp 6000

	check_buf_size 0 "== $size" "set MTU: "

	mtu_restore $swp



	__mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null



	# After replacing the qdisc for the same kind, buffer_size still has to

	# work.

	tc qdisc replace dev $swp root handle 1: bfifo limit 1M



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null

	check_buf_size 0 "== $size" "post replace, set size: "



	__mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null



	# Likewise after replacing for a different kind.

	tc qdisc replace dev $swp root handle 2: prio bands 8



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null

	check_buf_size 0 "== $size" "post replace different kind, set size: "



	tc qdisc delete dev $swp root



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 &> /dev/null

	check_fail $? "buffer_size should fail after qdisc is deleted"



	log_test "TC: buffer size"

}



test_int_buf()

{

	local what=$1; shift



	RET=0



	local buf0size=$(get_buf_size 0)

	local tot_size=$(get_tot_size)



	# Size of internal buffer and buffer 9.

	local dsize=$((tot_size - buf0size))



	tc qdisc add dev $swp clsact

	tc filter add dev $swp egress matchall skip_sw action mirred egress mirror dev $swp



	local buf0size_2=$(get_buf_size 0)

	local tot_size_2=$(get_tot_size)

	local dsize_2=$((tot_size_2 - buf0size_2))



	# Egress SPAN should have added to the "invisible" buffer configuration.

	((dsize_2 > dsize))

	check_err $? "Invisible buffers account for '$dsize_2', expected '> $dsize'"



	mtu_set $swp 3000



	local buf0size_3=$(get_buf_size 0)

	local tot_size_3=$(get_tot_size)

	local dsize_3=$((tot_size_3 - buf0size_3))



	# MTU change might change buffer 0, which will show at total, but the

	# hidden buffers should stay the same size.

	((dsize_3 == dsize_2))

	check_err $? "MTU change: Invisible buffers account for '$dsize_3', expected '== $dsize_2'"



	mtu_restore $swp

	tc qdisc del dev $swp clsact



	# After SPAN removal, hidden buffers should be back to the original sizes.

	local buf0size_4=$(get_buf_size 0)

	local tot_size_4=$(get_tot_size)

	local dsize_4=$((tot_size_4 - buf0size_4))

	((dsize_4 == dsize))

	check_err $? "SPAN removed: Invisible buffers account for '$dsize_4', expected '== $dsize'"



	log_test "${what}internal buffer size"

}



test_tc_int_buf()

{

	local cell_size=$(devlink_cell_size_get)

	local size=$((cell_size * 1000))



	tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M

	test_int_buf "TC: "



	__mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null

	test_int_buf "TC+buffsize: "



	__mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null

	tc qdisc delete dev $swp root

}



trap cleanup EXIT



bail_on_lldpad

setup_wait

tests_run



exit $EXIT_STATUS

tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh

+14 −0
Original line number Diff line number Diff line
@@ -82,3 +82,17 @@ bail_on_lldpad() 
		fi

	fi

}



__mlnx_qos()

{

	local err



	mlnx_qos "$@" 2>/dev/null

	err=$?



	if ((err)); then

		echo "Error ($err) in mlnx_qos $@" >/dev/stderr

	fi



	return $err

}

tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh

+5 −0
Original line number Diff line number Diff line
@@ -145,12 +145,17 @@ switch_create() 


	# Make sure that ingress quotas are smaller than egress so that there is

	# room for both streams of traffic to be admitted to shared buffer.

	devlink_port_pool_th_save $swp1 0

	devlink_port_pool_th_set $swp1 0 5

	devlink_tc_bind_pool_th_save $swp1 0 ingress

	devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5



	devlink_port_pool_th_save $swp2 0

	devlink_port_pool_th_set $swp2 0 5

	devlink_tc_bind_pool_th_save $swp2 1 ingress

	devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5



	devlink_port_pool_th_save $swp3 4

	devlink_port_pool_th_set $swp3 4 12

}

tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh

0 → 100755
+403 −0
Original line number Diff line number Diff line 
#!/bin/bash

# SPDX-License-Identifier: GPL-2.0

#

# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority

# of 1. This stream is consistently prioritized as priority 1, is put to PG

# buffer 1, and scheduled at TC 1.

#

# - the stream first ingresses through $swp1, where it is forwarded to $swp3

#

# - then it ingresses through $swp4. Here it is put to a lossless buffer and put

#   to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is

#   shaped, and thus the PFC pool eventually fills, therefore the headroom

#   fills, and $swp3 is paused.

#

# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at

#   a pool ("overflow pool"). The overflow pool needs to be large enough to

#   contain the whole burst.

#

# - eventually the PFC pool gets some traffic out, headroom therefore gets some

#   traffic to the pool, and $swp3 is unpaused again. This way the traffic is

#   gradually forwarded from the overflow pool, through the PFC pool, out of

#   $swp2, and eventually to $h2.

#

# - if PFC works, all lossless flow packets that ingress through $swp1 should

#   also be seen ingressing $h2. If it doesn't, there will be drops due to

#   discrepancy between the speeds of $swp1 and $h2.

#

# - it should all play out relatively quickly, so that SLL and HLL will not

#   cause drops.

#

# +-----------------------+

# | H1                    |

# |   + $h1.111           |

# |   | 192.0.2.33/28     |

# |   |                   |

# |   + $h1               |

# +---|-------------------+  +--------------------+

#     |                      |                    |

# +---|----------------------|--------------------|---------------------------+

# |   + $swp1          $swp3 +                    + $swp4                     |

# |   | iPOOL1        iPOOL0 |                    | iPOOL2                    |

# |   | ePOOL4        ePOOL5 |                    | ePOOL4                    |

# |   |                1Gbps |                    | 1Gbps                     |

# |   |        PFC:enabled=1 |                    | PFC:enabled=1             |

# | +-|----------------------|-+                +-|------------------------+  |

# | | + $swp1.111  $swp3.111 + |                | + $swp4.111              |  |

# | |                          |                |                          |  |

# | | BR1                      |                | BR2                      |  |

# | |                          |                |                          |  |

# | |                          |                |         + $swp2.111      |  |

# | +--------------------------+                +---------|----------------+  |

# |                                                       |                   |

# | iPOOL0: 500KB dynamic                                 |                   |

# | iPOOL1: 10MB static                                   |                   |

# | iPOOL2: 1MB static                                    + $swp2             |

# | ePOOL4: 500KB dynamic                                 | iPOOL0            |

# | ePOOL5: 10MB static                                   | ePOOL6            |

# | ePOOL6: "infinite" static                             | 200Mbps shaper    |

# +-------------------------------------------------------|-------------------+

#                                                         |

#                                                     +---|-------------------+

#                                                     |   + $h2            H2 |

#                                                     |   |                   |

#                                                     |   + $h2.111           |

#                                                     |     192.0.2.34/28     |

#                                                     +-----------------------+

#

# iPOOL0+ePOOL4 is a helper pool for control traffic etc.

# iPOOL1+ePOOL5 are overflow pools.

# iPOOL2+ePOOL6 are PFC pools.



ALL_TESTS="

	ping_ipv4

	test_qos_pfc

"



lib_dir=$(dirname $0)/../../../net/forwarding



NUM_NETIFS=6

source $lib_dir/lib.sh

source $lib_dir/devlink_lib.sh

source qos_lib.sh



_1KB=1000

_100KB=$((100 * _1KB))

_500KB=$((500 * _1KB))

_1MB=$((1000 * _1KB))

_10MB=$((10 * _1MB))



h1_create()

{

	simple_if_init $h1

	mtu_set $h1 10000



	vlan_create $h1 111 v$h1 192.0.2.33/28

}



h1_destroy()

{

	vlan_destroy $h1 111



	mtu_restore $h1

	simple_if_fini $h1

}



h2_create()

{

	simple_if_init $h2

	mtu_set $h2 10000



	vlan_create $h2 111 v$h2 192.0.2.34/28

}



h2_destroy()

{

	vlan_destroy $h2 111



	mtu_restore $h2

	simple_if_fini $h2

}



switch_create()

{

	# pools

	# -----



	devlink_pool_size_thtype_save 0

	devlink_pool_size_thtype_save 4

	devlink_pool_size_thtype_save 1

	devlink_pool_size_thtype_save 5

	devlink_pool_size_thtype_save 2

	devlink_pool_size_thtype_save 6



	devlink_port_pool_th_save $swp1 1

	devlink_port_pool_th_save $swp2 6

	devlink_port_pool_th_save $swp3 5

	devlink_port_pool_th_save $swp4 2



	devlink_tc_bind_pool_th_save $swp1 1 ingress

	devlink_tc_bind_pool_th_save $swp2 1 egress

	devlink_tc_bind_pool_th_save $swp3 1 egress

	devlink_tc_bind_pool_th_save $swp4 1 ingress



	# Control traffic pools. Just reduce the size. Keep them dynamic so that

	# we don't need to change all the uninteresting quotas.

	devlink_pool_size_thtype_set 0 dynamic $_500KB

	devlink_pool_size_thtype_set 4 dynamic $_500KB



	# Overflow pools.

	devlink_pool_size_thtype_set 1 static $_10MB

	devlink_pool_size_thtype_set 5 static $_10MB



	# PFC pools. As per the writ, the size of egress PFC pool should be

	# infinice, but actually it just needs to be large enough to not matter

	# in practice, so reuse the 10MB limit.

	devlink_pool_size_thtype_set 2 static $_1MB

	devlink_pool_size_thtype_set 6 static $_10MB



	# $swp1

	# -----



	ip link set dev $swp1 up

	mtu_set $swp1 10000

	vlan_create $swp1 111

	ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1



	devlink_port_pool_th_set $swp1 1 $_10MB

	devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB



	# Configure qdisc so that we can configure PG and therefore pool

	# assignment.

	tc qdisc replace dev $swp1 root handle 1: \

	   ets bands 8 strict 8 priomap 7 6

	__mlnx_qos -i $swp1 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null



	# $swp2

	# -----



	ip link set dev $swp2 up

	mtu_set $swp2 10000

	vlan_create $swp2 111

	ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1



	devlink_port_pool_th_set $swp2 6 $_10MB

	devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB



	# prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped.

	tc qdisc replace dev $swp2 root handle 1: \

	   ets bands 8 strict 8 priomap 7 6

	tc qdisc replace dev $swp2 parent 1:7 handle 17: \

	   tbf rate 200Mbit burst 131072 limit 1M



	# $swp3

	# -----



	ip link set dev $swp3 up

	mtu_set $swp3 10000

	vlan_create $swp3 111

	ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1



	devlink_port_pool_th_set $swp3 5 $_10MB

	devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB



	# prio 0->TC0 (band 7), 1->TC1 (band 6)

	tc qdisc replace dev $swp3 root handle 1: \

	   ets bands 8 strict 8 priomap 7 6



	# Need to enable PFC so that PAUSE takes effect. Therefore need to put

	# the lossless prio into a buffer of its own. Don't bother with buffer

	# sizes though, there is not going to be any pressure in the "backward"

	# direction.

	__mlnx_qos -i $swp3 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null

	__mlnx_qos -i $swp3 --pfc=0,1,0,0,0,0,0,0 >/dev/null



	# $swp4

	# -----



	ip link set dev $swp4 up

	mtu_set $swp4 10000

	vlan_create $swp4 111

	ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1



	devlink_port_pool_th_set $swp4 2 $_1MB

	devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB



	# Configure qdisc so that we can hand-tune headroom.

	tc qdisc replace dev $swp4 root handle 1: \

	   ets bands 8 strict 8 priomap 7 6

	__mlnx_qos -i $swp4 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null

	__mlnx_qos -i $swp4 --pfc=0,1,0,0,0,0,0,0 >/dev/null

	# PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which

	# is (-2*MTU) about 80K of delay provision.

	__mlnx_qos -i $swp3 --buffer_size=0,$_100KB,0,0,0,0,0,0 >/dev/null



	# bridges

	# -------



	ip link add name br1 type bridge vlan_filtering 0

	ip link set dev $swp1.111 master br1

	ip link set dev $swp3.111 master br1

	ip link set dev br1 up



	ip link add name br2 type bridge vlan_filtering 0

	ip link set dev $swp2.111 master br2

	ip link set dev $swp4.111 master br2

	ip link set dev br2 up

}



switch_destroy()

{

	# Do this first so that we can reset the limits to values that are only

	# valid for the original static / dynamic setting.

	devlink_pool_size_thtype_restore 6

	devlink_pool_size_thtype_restore 5

	devlink_pool_size_thtype_restore 4

	devlink_pool_size_thtype_restore 2

	devlink_pool_size_thtype_restore 1

	devlink_pool_size_thtype_restore 0



	# bridges

	# -------



	ip link set dev br2 down

	ip link set dev $swp4.111 nomaster

	ip link set dev $swp2.111 nomaster

	ip link del dev br2



	ip link set dev br1 down

	ip link set dev $swp3.111 nomaster

	ip link set dev $swp1.111 nomaster

	ip link del dev br1



	# $swp4

	# -----



	__mlnx_qos -i $swp4 --buffer_size=0,0,0,0,0,0,0,0 >/dev/null

	__mlnx_qos -i $swp4 --pfc=0,0,0,0,0,0,0,0 >/dev/null

	__mlnx_qos -i $swp4 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null

	tc qdisc del dev $swp4 root



	devlink_tc_bind_pool_th_restore $swp4 1 ingress

	devlink_port_pool_th_restore $swp4 2



	vlan_destroy $swp4 111

	mtu_restore $swp4

	ip link set dev $swp4 down



	# $swp3

	# -----



	__mlnx_qos -i $swp3 --pfc=0,0,0,0,0,0,0,0 >/dev/null

	__mlnx_qos -i $swp3 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null

	tc qdisc del dev $swp3 root



	devlink_tc_bind_pool_th_restore $swp3 1 egress

	devlink_port_pool_th_restore $swp3 5



	vlan_destroy $swp3 111

	mtu_restore $swp3

	ip link set dev $swp3 down



	# $swp2

	# -----



	tc qdisc del dev $swp2 parent 1:7

	tc qdisc del dev $swp2 root



	devlink_tc_bind_pool_th_restore $swp2 1 egress

	devlink_port_pool_th_restore $swp2 6



	vlan_destroy $swp2 111

	mtu_restore $swp2

	ip link set dev $swp2 down



	# $swp1

	# -----



	__mlnx_qos -i $swp1 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null

	tc qdisc del dev $swp1 root



	devlink_tc_bind_pool_th_restore $swp1 1 ingress

	devlink_port_pool_th_restore $swp1 1



	vlan_destroy $swp1 111

	mtu_restore $swp1

	ip link set dev $swp1 down

}



setup_prepare()

{

	h1=${NETIFS[p1]}

	swp1=${NETIFS[p2]}



	swp2=${NETIFS[p3]}

	h2=${NETIFS[p4]}



	swp3=${NETIFS[p5]}

	swp4=${NETIFS[p6]}



	h2mac=$(mac_get $h2)



	vrf_prepare



	h1_create

	h2_create

	switch_create

}



cleanup()

{

	pre_cleanup



	switch_destroy

	h2_destroy

	h1_destroy



	vrf_cleanup

}



ping_ipv4()

{

	ping_test $h1 192.0.2.34

}



test_qos_pfc()

{

	RET=0



	# 10M pool, each packet is 8K of payload + headers

	local pkts=$((_10MB / 8050))

	local size=$((pkts * 8050))

	local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1)

	local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1)



	$MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \

		-a own -b $h2mac -c $pkts -t udp -q

	sleep 2



	local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1)

	local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1)



	local din=$((in1 - in0))

	local dout=$((out1 - out0))



	local pct_in=$((din * 100 / size))



	((pct_in > 95 && pct_in < 105))

	check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%"



	((dout == din))

	check_err $? "$((din - dout)) bytes out of $din ingressed got lost"



	log_test "PFC"

}



trap cleanup EXIT



bail_on_lldpad

setup_prepare

setup_wait

tests_run



exit $EXIT_STATUS

CRA Git | Maintained and supported by SUSTech CRA and CCSE