Commit e02fb7aa authored by Joe Perches's avatar Joe Perches Committed by David S. Miller
Browse files

tulip/uli526x.c: Use dev_<level> and pr_<level> 



Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable

Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 27146c43

drivers/net/tulip/uli526x.c

+27 −19
Original line number Diff line number Diff line
@@ -12,6 +12,8 @@ 


*/



#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt



#define DRV_NAME	"uli526x"

#define DRV_VERSION	"0.9.3"

#define DRV_RELDATE	"2005-7-29"
@@ -82,9 +84,16 @@ 
#define ULI526X_TX_TIMEOUT ((16*HZ)/2)	/* tx packet time-out time 8 s" */

#define ULI526X_TX_KICK 	(4*HZ/2)	/* tx packet Kick-out time 2 s" */



#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))

#define ULI526X_DBUG(dbug_now, msg, value)			\

do {								\

	if (uli526x_debug || (dbug_now))			\

		pr_err("%s %lx\n", (msg), (long) (value));	\

} while (0)



#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");

#define SHOW_MEDIA_TYPE(mode)					\

	pr_err("Change Speed to %sMhz %s duplex\n",		\

	       mode & 1 ? "100" : "10",				\

	       mode & 4 ? "full" : "half");





/* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, 
	SET_NETDEV_DEV(dev, &pdev->dev);



	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {

		printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");

		pr_warning("32-bit PCI DMA not available\n");

		err = -ENODEV;

		goto err_out_free;

	}
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, 
		goto err_out_free;



	if (!pci_resource_start(pdev, 0)) {

		printk(KERN_ERR DRV_NAME ": I/O base is zero\n");

		pr_err("I/O base is zero\n");

		err = -ENODEV;

		goto err_out_disable;

	}



	if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {

		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");

		pr_err("Allocated I/O size too small\n");

		err = -ENODEV;

		goto err_out_disable;

	}



	if (pci_request_regions(pdev, DRV_NAME)) {

		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");

		pr_err("Failed to request PCI regions\n");

		err = -ENODEV;

		goto err_out_disable;

	}
@@ -382,8 +391,8 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, 
	if (err)

		goto err_out_res;



	printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",

	       dev->name,ent->driver_data >> 16,pci_name(pdev),

	dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",

		 ent->driver_data >> 16, pci_name(pdev),

		 dev->dev_addr, dev->irq);



	pci_set_master(pdev);
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev) 
		}

	}

	if(phy_tmp == 32)

		printk(KERN_WARNING "Can not find the phy address!!!");

		pr_warning("Can not find the phy address!!!");

	/* Parser SROM and media mode */

	db->media_mode = uli526x_media_mode;
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, 


	/* Too large packet check */

	if (skb->len > MAX_PACKET_SIZE) {

		printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);

		pr_err("big packet = %d\n", (u16)skb->len);

		dev_kfree_skb(skb);

		return NETDEV_TX_OK;

	}
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb, 
	/* No Tx resource check, it never happen nromally */

	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {

		spin_unlock_irqrestore(&db->lock, flags);

		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);

		pr_err("No Tx resource %ld\n", db->tx_packet_cnt);

		return NETDEV_TX_BUSY;

	}
@@ -1058,7 +1067,7 @@ static void uli526x_timer(unsigned long data) 
		/* Link Failed */

		ULI526X_DBUG(0, "Link Failed", tmp_cr12);

		netif_carrier_off(dev);

		printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);

		pr_info("%s NIC Link is Down\n",dev->name);

		db->link_failed = 1;



		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1099,11 @@ static void uli526x_timer(unsigned long data) 
				}

				if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)

				{

					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);

					pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);

				}

				else

				{

					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);

					pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);

				}

				netif_carrier_on(dev);

			}
@@ -1104,7 +1113,7 @@ static void uli526x_timer(unsigned long data) 
		{

			if(db->init==1)

			{

				printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);

				pr_info("%s NIC Link is Down\n",dev->name);

				netif_carrier_off(dev);

			}

		}
@@ -1230,8 +1239,7 @@ static int uli526x_resume(struct pci_dev *pdev) 


	err = pci_set_power_state(pdev, PCI_D0);

	if (err) {

		printk(KERN_WARNING "%s: Could not put device into D0\n",

			dev->name);

		dev_warn(&dev->dev, "Could not put device into D0\n");

		return err;

	}
@@ -1432,7 +1440,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt) 
		update_cr6(db->cr6_data, dev->base_addr);

		dev->trans_start = jiffies;

	} else

		printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");

		pr_err("No Tx resource - Send_filter_frame!\n");

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE