platform/chrome: cros_ec: Add command for regulator control. (dff08caf) · Commits · 戴 / test

drivers/platform/chrome/cros_ec_trace.c

+5 −0

Original line number	Diff line number	Diff line
		@@ -161,6 +161,11 @@
		TRACE_SYMBOL(EC_CMD_ADC_READ), \
		TRACE_SYMBOL(EC_CMD_ROLLBACK_INFO), \
		TRACE_SYMBOL(EC_CMD_AP_RESET), \
		TRACE_SYMBOL(EC_CMD_REGULATOR_GET_INFO), \
		TRACE_SYMBOL(EC_CMD_REGULATOR_ENABLE), \
		TRACE_SYMBOL(EC_CMD_REGULATOR_IS_ENABLED), \
		TRACE_SYMBOL(EC_CMD_REGULATOR_SET_VOLTAGE), \
		TRACE_SYMBOL(EC_CMD_REGULATOR_GET_VOLTAGE), \
		TRACE_SYMBOL(EC_CMD_CR51_BASE), \
		TRACE_SYMBOL(EC_CMD_CR51_LAST), \
		TRACE_SYMBOL(EC_CMD_FP_PASSTHRU), \

include/linux/platform_data/cros_ec_commands.h

+82 −0

Original line number	Diff line number	Diff line
		@@ -5430,6 +5430,88 @@ struct ec_response_rollback_info {
		/* Issue AP reset */
		#define EC_CMD_AP_RESET 0x0125

		/*****************************************************************************/
		/* Voltage regulator controls */

		/*
		* Get basic info of voltage regulator for given index.
		*
		* Returns the regulator name and supported voltage list in mV.
		*/
		#define EC_CMD_REGULATOR_GET_INFO 0x012B

		/* Maximum length of regulator name */
		#define EC_REGULATOR_NAME_MAX_LEN 16

		/* Maximum length of the supported voltage list. */
		#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16

		struct ec_params_regulator_get_info {
		uint32_t index;
		} __ec_align4;

		struct ec_response_regulator_get_info {
		char name[EC_REGULATOR_NAME_MAX_LEN];
		uint16_t num_voltages;
		uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT];
		} __ec_align1;

		/*
		* Configure the regulator as enabled / disabled.
		*/
		#define EC_CMD_REGULATOR_ENABLE 0x012C

		struct ec_params_regulator_enable {
		uint32_t index;
		uint8_t enable;
		} __ec_align4;

		/*
		* Query if the regulator is enabled.
		*
		* Returns 1 if the regulator is enabled, 0 if not.
		*/
		#define EC_CMD_REGULATOR_IS_ENABLED 0x012D

		struct ec_params_regulator_is_enabled {
		uint32_t index;
		} __ec_align4;

		struct ec_response_regulator_is_enabled {
		uint8_t enabled;
		} __ec_align1;

		/*
		* Set voltage for the voltage regulator within the range specified.
		*
		* The driver should select the voltage in range closest to min_mv.
		*
		* Also note that this might be called before the regulator is enabled, and the
		* setting should be in effect after the regulator is enabled.
		*/
		#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012E

		struct ec_params_regulator_set_voltage {
		uint32_t index;
		uint32_t min_mv;
		uint32_t max_mv;
		} __ec_align4;

		/*
		* Get the currently configured voltage for the voltage regulator.
		*
		* Note that this might be called before the regulator is enabled.
		*/
		#define EC_CMD_REGULATOR_GET_VOLTAGE 0x012F

		struct ec_params_regulator_get_voltage {
		uint32_t index;
		} __ec_align4;

		struct ec_response_regulator_get_voltage {
		uint32_t voltage_mv;
		} __ec_align4;

		/*****************************************************************************/
		/* The command range 0x200-0x2FF is reserved for Rotor. */

Admin message