+19
−118
drivers/video/omap2/dss/dispc_coefs.c
0 → 100644
+326
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
The FIR coefficients present in kernel are being updated to new coefficients consisting of 24 coefficient tables, with 12 each for 3 tap and 5 tap scenario, which are chosen on the basis of DISPC up/downsampling filters M value. M is the inverse of low pass cut off frequency of the sampling filter. For vertical scaling 3 tap or 5 tap tables are used based on the clock rate and width of the line buffer whereas in OMAP2 3 tap is always used. For horizontal scaling however 5 tap tables are always used. New coefficients and the corresponding logic have been tested on OMAP2, OMAP3 and OMAP4. Horizontal and vertical scaling worked fine except for some 3 tap vs 5 tap issue during vertical upscaling and clock failing issues which is acknowledged in the next patch. Vertical upscaling was found to perform better under 5 taps. The 24 coefficient tables have been moved to another file dispc_coefs.c for proper maintainance. This code is written based on code written by Lajos Molnar <lajos@ti.com> in Android Kernel for scaling. Lajos Molnar <lajos@ti.com> had fine tuned the FIR coefficient selection process and reduced outliness and blockiness around images when upscaling more than 2 times. Signed-off-by:Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
CRA Git | Maintained and supported by SUSTech CRA and CCSE