Loading arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +14 −0 Original line number Diff line number Diff line Loading @@ -10,4 +10,18 @@ output-low; }; }; usb_id_default: usb-id-default { pinmux { function = "gpio"; pins = "gpio121"; }; pinconf { pins = "gpio121"; drive-strength = <8>; input-enable; bias-pull-up; }; }; }; arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +34 −0 Original line number Diff line number Diff line Loading @@ -139,6 +139,40 @@ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; status = "okay"; }; usb@78d9000 { extcon = <&usb_id>, <&usb_id>; status = "okay"; }; ehci@78d9000 { status = "okay"; }; phy@78d9000 { v1p8-supply = <&pm8916_l7>; v3p3-supply = <&pm8916_l13>; vddcx-supply = <&pm8916_s1>; extcon = <&usb_id>, <&usb_id>; dr_mode = "otg"; status = "okay"; switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_sw_sel_pm>; }; }; usb2513 { compatible = "smsc,usb3503"; reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; initial-mode = <1>; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; Loading Loading
arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +14 −0 Original line number Diff line number Diff line Loading @@ -10,4 +10,18 @@ output-low; }; }; usb_id_default: usb-id-default { pinmux { function = "gpio"; pins = "gpio121"; }; pinconf { pins = "gpio121"; drive-strength = <8>; input-enable; bias-pull-up; }; }; };
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +34 −0 Original line number Diff line number Diff line Loading @@ -139,6 +139,40 @@ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; status = "okay"; }; usb@78d9000 { extcon = <&usb_id>, <&usb_id>; status = "okay"; }; ehci@78d9000 { status = "okay"; }; phy@78d9000 { v1p8-supply = <&pm8916_l7>; v3p3-supply = <&pm8916_l13>; vddcx-supply = <&pm8916_s1>; extcon = <&usb_id>, <&usb_id>; dr_mode = "otg"; status = "okay"; switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_sw_sel_pm>; }; }; usb2513 { compatible = "smsc,usb3503"; reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; initial-mode = <1>; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; }; Loading
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>Srinivas Kandagatla <srinivas.kandagatla@linaro.org>