Commit dcf2a4e0 authored by James Smart's avatar James Smart Committed by James Bottomley
Browse files

[SCSI] lpfc 8.3.17: SLI Additions and Fixes 



- Added driver support for management application to pass down two security
  specific mailbox commands (MBX_SECURITY_MGMT and MBX_AUTH_PORT)
- Added driver support for handling FIPS zeroization trap of host ERATT ER8,
  performing selective reset and bringing the device up.
- Added code to detect INIT_LINK mailbox command completion returning status
  MBXERR_SEC_NO_PERMISSION.
- Increased the wait timeout on host status register HS_FFRDY and HS_MBRDY
  being set.
- Remove the port offline code from the Heartbeat TMO handler.

Signed-off-by: default avatarAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent d439d286

drivers/scsi/lpfc/lpfc_attr.c

+10 −0
Original line number Diff line number Diff line
@@ -586,6 +586,11 @@ lpfc_issue_lip(struct Scsi_Host *shost) 
			       phba->cfg_link_speed);

		mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,

						     phba->fc_ratov * 2);

		if ((mbxstatus == MBX_SUCCESS) &&

		    (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))

			lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,

					"2859 SLI authentication is required "

					"for INIT_LINK but has not done yet\n");

	}



	lpfc_set_loopback_flag(phba);
@@ -3782,6 +3787,11 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj, 
		case MBX_PORT_CAPABILITIES:

		case MBX_PORT_IOV_CONTROL:

			break;

		case MBX_SECURITY_MGMT:

		case MBX_AUTH_PORT:

			if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)

				return -EPERM;

			break;

		case MBX_READ_SPARM64:

		case MBX_READ_LA:

		case MBX_READ_LA64:

drivers/scsi/lpfc/lpfc_hw.h

+5 −1
Original line number Diff line number Diff line
@@ -1380,6 +1380,9 @@ typedef struct { /* FireFly BIU registers */ 
#define MBX_INIT_VFI        0xA3

#define MBX_INIT_VPI        0xA4



#define MBX_AUTH_PORT       0xF8

#define MBX_SECURITY_MGMT   0xF9



/* IOCB Commands */



#define CMD_RCV_SEQUENCE_CX     0x01
@@ -1502,6 +1505,7 @@ typedef struct { /* FireFly BIU registers */ 
#define MBXERR_DMA_ERROR            15

#define MBXERR_ERROR                16

#define MBXERR_LINK_DOWN            0x33

#define MBXERR_SEC_NO_PERMISSION    0xF02

#define MBX_NOT_FINISHED            255



#define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */

drivers/scsi/lpfc/lpfc_init.c

+24 −21
Original line number Diff line number Diff line
@@ -1076,21 +1076,16 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) 
		} else {

			/*

			* If heart beat timeout called with hb_outstanding set

			* we need to take the HBA offline.

			* we need to give the hb mailbox cmd a chance to

			* complete or TMO.

			*/

			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,

					"0459 Adapter heartbeat failure, "

					"taking this port offline.\n");



			spin_lock_irq(&phba->hbalock);

			psli->sli_flag &= ~LPFC_SLI_ACTIVE;

			spin_unlock_irq(&phba->hbalock);



			lpfc_offline_prep(phba);

			lpfc_offline(phba);

			lpfc_unblock_mgmt_io(phba);

			phba->link_state = LPFC_HBA_ERROR;

			lpfc_hba_down_post(phba);

			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,

					"0459 Adapter heartbeat still out"

					"standing:last compl time was %d ms.\n",

					jiffies_to_msecs(jiffies

						 - phba->last_completion_time));

			mod_timer(&phba->hb_tmofunc,

				  jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);

		}

	}

}
@@ -1277,13 +1272,21 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) 
	if (phba->hba_flag & DEFER_ERATT)

		lpfc_handle_deferred_eratt(phba);



	if (phba->work_hs & HS_FFER6) {

	if ((phba->work_hs & HS_FFER6) || (phba->work_hs & HS_FFER8)) {

		if (phba->work_hs & HS_FFER6)

			/* Re-establishing Link */

			lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,

					"1301 Re-establishing Link "

					"Data: x%x x%x x%x\n",

				phba->work_hs,

				phba->work_status[0], phba->work_status[1]);

					phba->work_hs, phba->work_status[0],

					phba->work_status[1]);

		if (phba->work_hs & HS_FFER8)

			/* Device Zeroization */

			lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,

					"2861 Host Authentication device "

					"zeroization Data:x%x x%x x%x\n",

					phba->work_hs, phba->work_status[0],

					phba->work_status[1]);



		spin_lock_irq(&phba->hbalock);

		psli->sli_flag &= ~LPFC_SLI_ACTIVE;

drivers/scsi/lpfc/lpfc_sli.c

+39 −16
Original line number Diff line number Diff line
@@ -1677,6 +1677,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) 
	case MBX_RESUME_RPI:

	case MBX_READ_EVENT_LOG_STATUS:

	case MBX_READ_EVENT_LOG:

	case MBX_SECURITY_MGMT:

	case MBX_AUTH_PORT:

		ret = mbxCommand;

		break;

	default:
@@ -1781,6 +1783,13 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 
		pmb->context2 = NULL;

	}



	/* Check security permission status on INIT_LINK mailbox command */

	if ((pmb->u.mb.mbxCommand == MBX_INIT_LINK) &&

	    (pmb->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))

		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,

				"2860 SLI authentication is required "

				"for INIT_LINK but has not done yet\n");



	if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)

		lpfc_sli4_mbox_cmd_free(phba, pmb);

	else
@@ -3658,11 +3667,15 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) 
	i = 0;

	while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {



		/* Check every 100ms for 5 retries, then every 500ms for 5, then

		 * every 2.5 sec for 5, then reset board and every 2.5 sec for

		 * 4.

		/* Check every 10ms for 10 retries, then every 100ms for 90

		 * retries, then every 1 sec for 50 retires for a total of

		 * ~60 seconds before reset the board again and check every

		 * 1 sec for 50 retries. The up to 60 seconds before the

		 * board ready is required by the Falcon FIPS zeroization

		 * complete, and any reset the board in between shall cause

		 * restart of zeroization, further delay the board ready.

		 */

		if (i++ >= 20) {

		if (i++ >= 200) {

			/* Adapter failed to init, timeout, status reg

			   <status> */

			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3690,15 +3703,14 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) 
			return -EIO;

		}



		if (i <= 5) {

		if (i <= 10)

			msleep(10);

		} else if (i <= 10) {

			msleep(500);

		} else {

			msleep(2500);

		}

		else if (i <= 100)

			msleep(100);

		else

			msleep(1000);



		if (i == 15) {

		if (i == 150) {

			/* Do post */

			phba->pport->port_state = LPFC_VPORT_UNKNOWN;

			lpfc_sli_brdrestart(phba);
@@ -5950,6 +5962,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, 
	uint8_t command_type = ELS_COMMAND_NON_FIP;

	uint8_t cmnd;

	uint16_t xritag;

	uint16_t abrt_iotag;

	struct lpfc_iocbq *abrtiocbq;

	struct ulp_bde64 *bpl = NULL;

	uint32_t els_id = ELS_ID_DEFAULT;

	int numBdes, i;
@@ -6162,9 +6176,17 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, 
	case CMD_ABORT_XRI_CX:

		/* words 0-2 memcpy should be 0 rserved */

		/* port will send abts */

		if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)

		abrt_iotag = iocbq->iocb.un.acxri.abortContextTag;

		if (abrt_iotag != 0 && abrt_iotag <= phba->sli.last_iotag) {

			abrtiocbq = phba->sli.iocbq_lookup[abrt_iotag];

			fip = abrtiocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK;

		} else

			fip = 0;



		if ((iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN) || fip)

			/*

			 * The link is down so the fw does not need to send abts

			 * The link is down, or the command was ELS_FIP

			 * so the fw does not need to send abts

			 * on the wire.

			 */

			bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
@@ -7895,7 +7917,7 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba) 
		/* Check if there is a deferred error condition is active */

		if ((HS_FFER1 & phba->work_hs) &&

		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |

		     HS_FFER6 | HS_FFER7) & phba->work_hs)) {

		      HS_FFER6 | HS_FFER7 | HS_FFER8) & phba->work_hs)) {

			phba->hba_flag |= DEFER_ERATT;

			/* Clear all interrupt enable conditions */

			writel(0, phba->HCregaddr);
@@ -8211,7 +8233,8 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id) 
			 */

			if ((HS_FFER1 & phba->work_hs) &&

				((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |

				HS_FFER6 | HS_FFER7) & phba->work_hs)) {

				  HS_FFER6 | HS_FFER7 | HS_FFER8) &

				  phba->work_hs)) {

				phba->hba_flag |= DEFER_ERATT;

				/* Clear all interrupt enable conditions */

				writel(0, phba->HCregaddr);

CRA Git | Maintained and supported by SUSTech CRA and CCSE