Commit dcb9cf39 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next 

usb: xceiv: patches for v3.7 merge window

nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.

Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.

We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.

Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.
parents 7135f08e 363366cf

Documentation/devicetree/bindings/usb/twlxxxx-usb.txt

0 → 100644
+40 −0
Original line number Diff line number Diff line 
USB COMPARATOR OF TWL CHIPS



TWL6030 USB COMPARATOR

 - compatible : Should be "ti,twl6030-usb"

 - interrupts : Two interrupt numbers to the cpu should be specified. First

   interrupt number is the otg interrupt number that raises ID interrupts when

   the controller has to act as host and the second interrupt number is the

   usb interrupt number that raises VBUS interrupts when the controller has to

   act as device

 - usb-supply : phandle to the regulator device tree node. It should be vusb

   if it is twl6030 or ldousb if it is twl6025 subclass.



twl6030-usb {

	compatible = "ti,twl6030-usb";

	interrupts = < 4 10 >;

};



Board specific device node entry

&twl6030-usb {

	usb-supply = <&vusb>;

};



TWL4030 USB PHY AND COMPARATOR

 - compatible : Should be "ti,twl4030-usb"

 - interrupts : The interrupt numbers to the cpu should be specified. First

   interrupt number is the otg interrupt number that raises ID interrupts

   and VBUS interrupts. The second interrupt number is optional.

 - <supply-name>-supply : phandle to the regulator device tree node.

   <supply-name> should be vusb1v5, vusb1v8 and vusb3v1

 - usb_mode : The mode used by the phy to connect to the controller. "1"

   specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.



twl4030-usb {

	compatible = "ti,twl4030-usb";

	interrupts = < 10 4 >;

	usb1v5-supply = <&vusb1v5>;

	usb1v8-supply = <&vusb1v8>;

	usb3v1-supply = <&vusb3v1>;

	usb_mode = <1>;

};

Documentation/devicetree/bindings/usb/usb-phy.txt

0 → 100644
+17 −0
Original line number Diff line number Diff line 
USB PHY



OMAP USB2 PHY



Required properties:

 - compatible: Should be "ti,omap-usb2"

 - reg : Address and length of the register set for the device. Also

add the address of control module dev conf register until a driver for

control module is added



This is usually a subnode of ocp2scp to which it is connected.



usb2phy@4a0ad080 {

	compatible = "ti,omap-usb2";

	reg = <0x4a0ad080 0x58>,

	      <0x4a002300 0x4>;

};

arch/arm/mach-omap2/board-omap3evm.c

+1 −0
Original line number Diff line number Diff line
@@ -32,6 +32,7 @@ 
#include <linux/spi/ads7846.h>

#include <linux/i2c/twl.h>

#include <linux/usb/otg.h>

#include <linux/usb/nop-usb-xceiv.h>

#include <linux/smsc911x.h>



#include <linux/wl12xx.h>

arch/arm/mach-omap2/omap_phy_internal.c

+0 −138
Original line number Diff line number Diff line
@@ -31,144 +31,6 @@ 
#include <plat/usb.h>

#include "control.h"



/* OMAP control module register for UTMI PHY */

#define CONTROL_DEV_CONF		0x300

#define PHY_PD				0x1



#define USBOTGHS_CONTROL		0x33c

#define	AVALID				BIT(0)

#define	BVALID				BIT(1)

#define	VBUSVALID			BIT(2)

#define	SESSEND				BIT(3)

#define	IDDIG				BIT(4)



static struct clk *phyclk, *clk48m, *clk32k;

static void __iomem *ctrl_base;

static int usbotghs_control;



int omap4430_phy_init(struct device *dev)

{

	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);

	if (!ctrl_base) {

		pr_err("control module ioremap failed\n");

		return -ENOMEM;

	}

	/* Power down the phy */

	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);



	if (!dev) {

		iounmap(ctrl_base);

		return 0;

	}



	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");

	if (IS_ERR(phyclk)) {

		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");

		iounmap(ctrl_base);

		return PTR_ERR(phyclk);

	}



	clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");

	if (IS_ERR(clk48m)) {

		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");

		clk_put(phyclk);

		iounmap(ctrl_base);

		return PTR_ERR(clk48m);

	}



	clk32k = clk_get(dev, "usb_phy_cm_clk32k");

	if (IS_ERR(clk32k)) {

		dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");

		clk_put(phyclk);

		clk_put(clk48m);

		iounmap(ctrl_base);

		return PTR_ERR(clk32k);

	}

	return 0;

}



int omap4430_phy_set_clk(struct device *dev, int on)

{

	static int state;



	if (on && !state) {

		/* Enable the phy clocks */

		clk_enable(phyclk);

		clk_enable(clk48m);

		clk_enable(clk32k);

		state = 1;

	} else if (state) {

		/* Disable the phy clocks */

		clk_disable(phyclk);

		clk_disable(clk48m);

		clk_disable(clk32k);

		state = 0;

	}

	return 0;

}



int omap4430_phy_power(struct device *dev, int ID, int on)

{

	if (on) {

		if (ID)

			/* enable VBUS valid, IDDIG groung */

			__raw_writel(AVALID | VBUSVALID, ctrl_base +

							USBOTGHS_CONTROL);

		else

			/*

			 * Enable VBUS Valid, AValid and IDDIG

			 * high impedance

			 */

			__raw_writel(IDDIG | AVALID | VBUSVALID,

						ctrl_base + USBOTGHS_CONTROL);

	} else {

		/* Enable session END and IDIG to high impedance. */

		__raw_writel(SESSEND | IDDIG, ctrl_base +

					USBOTGHS_CONTROL);

	}

	return 0;

}



int omap4430_phy_suspend(struct device *dev, int suspend)

{

	if (suspend) {

		/* Disable the clocks */

		omap4430_phy_set_clk(dev, 0);

		/* Power down the phy */

		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);



		/* save the context */

		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);

	} else {

		/* Enable the internel phy clcoks */

		omap4430_phy_set_clk(dev, 1);

		/* power on the phy */

		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {

			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);

			mdelay(200);

		}



		/* restore the context */

		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);

	}



	return 0;

}



int omap4430_phy_exit(struct device *dev)

{

	if (ctrl_base)

		iounmap(ctrl_base);

	if (phyclk)

		clk_put(phyclk);

	if (clk48m)

		clk_put(clk48m);

	if (clk32k)

		clk_put(clk32k);



	return 0;

}



void am35x_musb_reset(void)

{

	u32	regval;

arch/arm/mach-omap2/twl-common.c

+0 −5
Original line number Diff line number Diff line
@@ -250,11 +250,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, 


#if defined(CONFIG_ARCH_OMAP4)

static struct twl4030_usb_data omap4_usb_pdata = {

	.phy_init	= omap4430_phy_init,

	.phy_exit	= omap4430_phy_exit,

	.phy_power	= omap4430_phy_power,

	.phy_set_clock	= omap4430_phy_set_clk,

	.phy_suspend	= omap4430_phy_suspend,

};



static struct regulator_init_data omap4_vdac_idata = {

CRA Git | Maintained and supported by SUSTech CRA and CCSE