Commit dcad9f03 authored by Stephen Warren's avatar Stephen Warren Committed by Mark Brown
Browse files

ASoC: rt5640: add device tree support 



Modify the RT5640 driver to parse platform data from device tree. Write
a DT binding document to describe those properties.

Slight re-ordering of rt5640_i2c_probe() to better fit the DT parsing.

Since ldo1_en is optional, guard usage of it with gpio_is_valid(), rather
than open-coding an if (gpio) check.

Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 997b0520

Documentation/devicetree/bindings/sound/rt5640.txt

0 → 100644
+30 −0
Original line number Diff line number Diff line 
RT5640 audio CODEC



This device supports I2C only.



Required properties:



- compatible : "realtek,rt5640".



- reg : The I2C address of the device.



- interrupts : The CODEC's interrupt output.



Optional properties:



- realtek,in1-differential

- realtek,in2-differential

  Boolean. Indicate MIC1/2 input are differential, rather than single-ended.



- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.



Example:



rt5640 {

	compatible = "realtek,rt5640";

	reg = <0x1c>;

	interrupt-parent = <&gpio>;

	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;

	realtek,ldo1-en-gpios =

		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;

};

sound/soc/codecs/rt5640.c

+42 −6
Original line number Diff line number Diff line
@@ -18,6 +18,7 @@ 
#include <linux/gpio.h>

#include <linux/i2c.h>

#include <linux/regmap.h>

#include <linux/of_gpio.h>

#include <linux/platform_device.h>

#include <linux/spi/spi.h>

#include <sound/core.h>
@@ -1998,6 +1999,28 @@ static const struct i2c_device_id rt5640_i2c_id[] = { 
};

MODULE_DEVICE_TABLE(i2c, rt5640_i2c_id);



static int rt5640_parse_dt(struct rt5640_priv *rt5640, struct device_node *np)

{

	rt5640->pdata.in1_diff = of_property_read_bool(np,

					"realtek,in1-differential");

	rt5640->pdata.in2_diff = of_property_read_bool(np,

					"realtek,in2-differential");



	rt5640->pdata.ldo1_en = of_get_named_gpio(np,

					"realtek,ldo1-en-gpios", 0);

	/*

	 * LDO1_EN is optional (it may be statically tied on the board).

	 * -ENOENT means that the property doesn't exist, i.e. there is no

	 * GPIO, so is not an error. Any other error code means the property

	 * exists, but could not be parsed.

	 */

	if (!gpio_is_valid(rt5640->pdata.ldo1_en) &&

			(rt5640->pdata.ldo1_en != -ENOENT))

		return rt5640->pdata.ldo1_en;



	return 0;

}



static int rt5640_i2c_probe(struct i2c_client *i2c,

		    const struct i2c_device_id *id)

{
@@ -2011,6 +2034,24 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, 
				GFP_KERNEL);

	if (NULL == rt5640)

		return -ENOMEM;

	i2c_set_clientdata(i2c, rt5640);



	if (pdata) {

		rt5640->pdata = *pdata;

		/*

		 * Translate zero'd out (default) pdata value to an invalid

		 * GPIO ID. This makes the pdata and DT paths consistent in

		 * terms of the value left in this field when no GPIO is

		 * specified, but means we can't actually use GPIO 0.

		 */

		if (!rt5640->pdata.ldo1_en)

			rt5640->pdata.ldo1_en = -EINVAL;

	} else if (i2c->dev.of_node) {

		ret = rt5640_parse_dt(rt5640, i2c->dev.of_node);

		if (ret)

			return ret;

	} else

		rt5640->pdata.ldo1_en = -EINVAL;



	rt5640->regmap = devm_regmap_init_i2c(i2c, &rt5640_regmap);

	if (IS_ERR(rt5640->regmap)) {
@@ -2020,12 +2061,7 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, 
		return ret;

	}



	if (pdata)

		rt5640->pdata = *pdata;



	i2c_set_clientdata(i2c, rt5640);



	if (rt5640->pdata.ldo1_en) {

	if (gpio_is_valid(rt5640->pdata.ldo1_en)) {

		ret = devm_gpio_request_one(&i2c->dev, rt5640->pdata.ldo1_en,

					    GPIOF_OUT_INIT_HIGH,

					    "RT5640 LDO1_EN");

CRA Git | Maintained and supported by SUSTech CRA and CCSE