Commit db890dad authored by Markus Pargmann's avatar Markus Pargmann Committed by Shawn Guo
Browse files

ARM: dts: Add device tree support for phycard pca100 



Board files for Phytec phyCARD-S "System on Module" and "Rapid
Development Kit".

Based on patches from:

Steffen Trumtrar <s.trumtrar@pengutronix.de>:
 - Original patch
 - ARM: dts: Set partition offsets for phycard
 - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100
 - ARM: imx27-phytec-phycard-S.dts: resize nand partitions

Jan Luebbe <jlu@pengutronix.de>:
 - ARM: dts: Enable bad block table in NAND

Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: default avatarMarkus Pargmann <mpa@pengutronix.de>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent dc1d0f91

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -112,6 +112,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ 
	imx27-pdk.dtb \

	imx27-phytec-phycore-som.dtb \

	imx27-phytec-phycore-rdk.dtb \

	imx27-phytec-phycard-s-som.dtb \

	imx27-phytec-phycard-s-rdk.dtb \

	imx31-bug.dtb \

	imx51-apf51.dtb \

	imx51-apf51dev.dtb \

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

0 → 100644
+62 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2012 Markus Pargmann, Pengutronix

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



#include "imx27-phytec-phycard-s-som.dts"



/ {

	model = "Phytec pca100 rapid development kit";

	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";



	display: display {

		model = "Primeview-PD050VL1";

		native-mode = <&timing0>;

		bits-per-pixel = <16>;  /* non-standard but required */

		fsl,pcr = <0xf0c88080>;	/* non-standard but required */

		display-timings {

			timing0: 640x480 {

				hactive = <640>;

				vactive = <480>;

				hback-porch = <112>;

				hfront-porch = <36>;

				hsync-len = <32>;

				vback-porch = <33>;

				vfront-porch = <33>;

				vsync-len = <2>;

				clock-frequency = <25000000>;

			};

		};

	};

};



&fb {

	display = <&display>;

	status = "okay";

};



&sdhci2 {

	cd-gpios = <&gpio3 29 0>;

	status = "okay";

};



&uart1 {

	fsl,uart-has-rtscts;

	status = "okay";

};



&uart2 {

	fsl,uart-has-rtscts;

	status = "okay";

};



&uart3 {

	fsl,uart-has-rtscts;

	status = "okay";

};

arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts

0 → 100644
+72 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar

 * and Markus Pargmann, Pengutronix

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

#include "imx27.dtsi"



/ {

	model = "Phytec pca100";

	compatible = "phytec,imx27-pca100", "fsl,imx27";



	memory {

		reg = <0xa0000000 0x08000000>; /* 128MB */

	};

};



&cspi1 {

	fsl,spi-num-chipselects = <2>;

	cs-gpios = <&gpio4 28 0>,

		<&gpio4 27 0>;

	status = "okay";

};



&fec {

	status = "okay";

};



&i2c1 {

	status = "okay";



	ioexpander@41 {

		compatible = "nxp,pca9536";

		reg = <0x41>;

	};



	rtc@51 {

		compatible = "nxp,pcf8563";

		reg = <0x51>;

	};

};



&i2c2 {

	status = "okay";



	lm75@4a {

		compatible = "national,lm75";

		reg = <0x4a>;

	};



	rtc@51 {

		compatible = "nxp,pcf8563";

		reg = <0x51>;

	};



	at24@52 {

		compatible = "at,24c32";

		pagesize = <32>;

		reg = <0x52>;

	};

};



&owire {

	status = "okay";

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE