Commit da82480d authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'pxa-for-4.13' of https://github.com/rjarzmik/linux into next/soc 

This is the pxa changes for v4.13 cycle.

This cycle is a minor fixes one, with :
 - Coccinelle found improvements
 - magician getting touchscreen driver support.

* tag 'pxa-for-4.13' of https://github.com/rjarzmik/linux

:
  ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
  ARM: pxa: Improve a size determination in pxa3xx_u2d_probe()
  ARM: pxa: Delete an error message for a failed memory allocation in pxa_pm_init()
  ARM: pxa: magician: Add support for ADS7846 touchscreen

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 2b1ee306 ce3de60f

arch/arm/mach-pxa/include/mach/magician.h

+1 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ 
#define GPIO10_MAGICIAN_GSM_IRQ			10

#define GPIO11_MAGICIAN_GSM_OUT1		11

#define GPIO13_MAGICIAN_CPLD_IRQ		13

#define GPIO14_MAGICIAN_TSC2046_CS		14

#define GPIO18_MAGICIAN_UNKNOWN			18

#define GPIO22_MAGICIAN_VIBRA_EN		22

#define GPIO26_MAGICIAN_GSM_POWER		26

arch/arm/mach-pxa/magician.c

+83 −1
Original line number Diff line number Diff line
@@ -54,6 +54,10 @@ 
#include "devices.h"

#include "generic.h"



#include <linux/spi/spi.h>

#include <linux/spi/pxa2xx_spi.h>

#include <linux/spi/ads7846.h>



static unsigned long magician_pin_config[] __initdata = {



	/* SDRAM and Static Memory I/O Signals */
@@ -85,7 +89,7 @@ static unsigned long magician_pin_config[] __initdata = { 


	/* SSP 2 TSC2046 touchscreen */

	GPIO19_SSP2_SCLK,

	GPIO14_SSP2_SFRM,

	MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH),	/* frame as GPIO */

	GPIO89_SSP2_TXD,

	GPIO88_SSP2_RXD,
@@ -674,6 +678,37 @@ static struct platform_device bq24022 = { 
	},

};



/*

 * fixed regulator for ads7846

 */



static struct regulator_consumer_supply ads7846_supply =

	REGULATOR_SUPPLY("vcc", "spi2.0");



static struct regulator_init_data vads7846_regulator = {

	.constraints	= {

		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,

	},

	.num_consumer_supplies	= 1,

	.consumer_supplies	= &ads7846_supply,

};



static struct fixed_voltage_config vads7846 = {

	.supply_name	= "vads7846",

	.microvolts	= 3300000, /* probably */

	.gpio		= -EINVAL,

	.startup_delay	= 0,

	.init_data	= &vads7846_regulator,

};



static struct platform_device vads7846_device = {

	.name	= "reg-fixed-voltage",

	.id	= -1,

	.dev	= {

		.platform_data	= &vads7846,

	},

};



/*

 * Vcore regulator MAX1587A

 */
@@ -851,6 +886,49 @@ static struct i2c_pxa_platform_data magician_i2c_power_info = { 
	.fast_mode	= 1,

};



/*

 * Touchscreen

 */



static struct ads7846_platform_data ads7846_pdata = {

	.model		= 7846,

	.x_plate_ohms	= 317,

	.y_plate_ohms	= 500,

	.pressure_max	= 1023,	/* with x plate ohms it will overflow 255 */

	.debounce_max	= 3,	/* first readout is always bad */

	.debounce_tol	= 30,

	.debounce_rep	= 0,

	.gpio_pendown	= GPIO115_MAGICIAN_nPEN_IRQ,

	.keep_vref_on	= 1,

	.wakeup		= true,

	.vref_delay_usecs		= 100,

	.penirq_recheck_delay_usecs	= 100,

};



struct pxa2xx_spi_chip tsc2046_chip_info = {

	.tx_threshold	= 1,

	.rx_threshold	= 2,

	.timeout	= 64,

	/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */

	.gpio_cs	= GPIO14_MAGICIAN_TSC2046_CS,

};



static struct pxa2xx_spi_master magician_spi_info = {

	.num_chipselect	= 1,

	.enable_dma	= 1,

};



static struct spi_board_info ads7846_spi_board_info[] __initdata = {

	{

		.modalias		= "ads7846",

		.bus_num		= 2,

		.max_speed_hz		= 2500000,

		.platform_data		= &ads7846_pdata,

		.controller_data	= &tsc2046_chip_info,

		.irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),

	},

};



/*

 * Platform devices

 */
@@ -865,6 +943,7 @@ static struct platform_device *devices[] __initdata = { 
	&power_supply,

	&strataflash,

	&leds_gpio,

	&vads7846_device,

};



static struct gpio magician_global_gpios[] = {
@@ -922,6 +1001,9 @@ static void __init magician_init(void) 
	} else

		pr_err("LCD detection: CPLD mapping failed\n");



	pxa2xx_set_spi_info(2, &magician_spi_info);

	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));



	regulator_register_always_on(0, "power", pwm_backlight_supply,

		ARRAY_SIZE(pwm_backlight_supply), 5000000);

arch/arm/mach-pxa/pm.c

+1 −3
Original line number Diff line number Diff line
@@ -107,10 +107,8 @@ static int __init pxa_pm_init(void) 
	sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count,

				   sizeof(*sleep_save),

				   GFP_KERNEL);

	if (!sleep_save) {

		printk(KERN_ERR "failed to alloc memory for pm save\n");

	if (!sleep_save)

		return -ENOMEM;

	}



	suspend_set_ops(&pxa_pm_ops);

	return 0;

arch/arm/mach-pxa/pxa3xx-ulpi.c

+2 −4
Original line number Diff line number Diff line
@@ -286,11 +286,9 @@ static int pxa3xx_u2d_probe(struct platform_device *pdev) 
	struct resource *r;

	int err;



	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);

	if (!u2d) {

		dev_err(&pdev->dev, "failed to allocate memory\n");

	u2d = kzalloc(sizeof(*u2d), GFP_KERNEL);

	if (!u2d)

		return -ENOMEM;

	}



	u2d->clk = clk_get(&pdev->dev, NULL);

	if (IS_ERR(u2d->clk)) {

CRA Git | Maintained and supported by SUSTech CRA and CCSE