staging: rtl8192su: update r8192U.h (d9c5cc98) · Commits · 戴 / test

drivers/staging/rtl8192su/r8192U.h

+95 −26

Original line number	Diff line number	Diff line
		/*
		This is part of rtl8187 OpenSource driver.
		Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it>
		Released under the terms of GPL (General Public Licence)

		Parts of this driver are based on the GPL part of the
		official realtek driver

		Parts of this driver are based on the rtl8192 driver skeleton
		from Patric Schenke & Andres Salomon

		Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

		We want to tanks the Authors of those projects and the Ndiswrapper
		project Authors.
		*/
		/******************************************************************************
		* Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
		* Linux device driver for RTL8192U
		*
		* Based on the r8187 driver, which is:
		* Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of version 2 of the GNU General Public License as
		* published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful, but WITHOUT
		* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
		* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
		* more details.
		*
		* You should have received a copy of the GNU General Public License along with
		* this program; if not, write to the Free Software Foundation, Inc.,
		* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
		*
		* The full GNU General Public License is included in this distribution in the
		* file called LICENSE.
		*
		* Contact Information:
		* wlanfae <wlanfae@realtek.com>
		******************************************************************************/

		#ifndef R819xU_H
		#define R819xU_H
		@@ -110,6 +119,7 @@ do { if(rt_global_debug_component & component) \

		#define COMP_TRACE BIT0 // For function call tracing.
		#define COMP_DBG BIT1 // Only for temporary debug message.
		#define COMP_MLME BIT1
		#define COMP_INIT BIT2 // during driver initialization / halt / reset.


		@@ -133,12 +143,14 @@ do { if(rt_global_debug_component & component) \
		#define COMP_SEC BIT20 // Event handling
		#define COMP_LED BIT21 // For LED.
		#define COMP_RF BIT22 // For RF.
		#define COMP_RXDESC BIT23

		#define COMP_RXDESC BIT23 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.

		#define COMP_FIRMWARE BIT24 //for firmware downloading
		#define COMP_HT BIT25 // For 802.11n HT related information. by Emily 2006-8-11
		#define COMP_AMSDU BIT26 // For A-MSDU Debugging
		#define COMP_PS BIT26

		#define COMP_SCAN BIT27
		#define COMP_CMD BIT28
		@@ -569,12 +581,6 @@ typedef struct rx_desc_819x_usb{
		// Driver info are written to the begining of the RxBuffer
		//
		typedef struct rx_drvinfo_819x_usb{
		//
		// Driver info contain PHY status and other variabel size info
		// PHY Status content as below
		//

		//DWORD 0
		u8 gain_trsw[4];

		//DWORD 1
		@@ -622,6 +628,9 @@ typedef struct rx_drvinfo_819x_usb{
		#endif
		#define scrclng 4 // octets for crc32 (FCS, ICV)

		#define HAL_DM_DIG_DISABLE BIT0
		#define HAL_DM_HIPWR_DISABLE BIT1

		typedef enum rf_optype
		{
		RF_OP_By_SW_3wire = 0,
		@@ -972,8 +981,26 @@ typedef enum _RT_CUSTOMER_ID
		RT_CID_Nettronix = 11,
		RT_CID_DLINK = 12,
		RT_CID_PRONET = 13,
		RT_CID_COREGA = 14,
		RT_CID_819x_ALPHA = 15,
		RT_CID_819x_Sitecom = 16,
		RT_CID_CCX = 17,
		RT_CID_819x_Lenovo = 18,
		RT_CID_819x_QMI = 19,
		RT_CID_819x_Edimax_Belkin = 20,
		RT_CID_819x_Sercomm_Belkin = 21,
		RT_CID_819x_CAMEO1 = 22,
		RT_CID_819x_MSI = 23,
		RT_CID_819x_Acer = 24,
		}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;

		typedef enum _RT_OP_MODE{
		RT_OP_MODE_AP,
		RT_OP_MODE_INFRASTRUCTURE,
		RT_OP_MODE_IBSS,
		RT_OP_MODE_NO_LINK,
		}RT_OP_MODE, *PRT_OP_MODE;

		typedef enum _RESET_TYPE {
		RESET_TYPE_NORESET = 0x00,
		RESET_TYPE_NORMAL = 0x01,
		@@ -1017,11 +1044,12 @@ typedef struct r8192_priv
		struct rtl819x_ops* ops;
		struct usb_device *udev;
		/* added for maintain info from eeprom */
		short epromtype;
		u16 eeprom_vid;
		u16 eeprom_pid;
		u8 eeprom_CustomerID;
		u8 eeprom_SubCustomerID;
		u8 eeprom_ChannelPlan;
		u16 eeprom_ChannelPlan;
		RT_CUSTOMER_ID CustomerID;
		LED_STRATEGY_819xUsb LedStrategy;
		u8 txqueue_to_outpipemap[9];
		@@ -1033,8 +1061,11 @@ typedef struct r8192_priv
		int irq;
		struct ieee80211_device *ieee80211;

		u8 RATRTableBitmap;

		u32 IC_Cut;
		short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
		u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
		u32 card_8192_version; /* if TCR reports card V B/C this discriminates */
		short enable_gpio0;
		enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
		short hw_plcp_len;
		@@ -1044,7 +1075,9 @@ typedef struct r8192_priv
		spinlock_t tx_lock;
		spinlock_t ps_lock;
		struct mutex mutex;
		bool ps_force;
		spinlock_t rf_lock; //used to lock rf write operation added by wb
		spinlock_t rf_ps_lock;

		u16 irq_mask;
		short chan;
		@@ -1053,6 +1086,7 @@ typedef struct r8192_priv

		short up;
		short crcmon; //if 1 allow bad crc frame reception in monitor mode
		bool bSurpriseRemoved;

		struct semaphore wx_sem;
		struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
		@@ -1064,8 +1098,8 @@ typedef struct r8192_priv
		u8 (rf_set_chan)(struct net_device dev,u8 ch);
		void (rf_close)(struct net_device dev);
		void (rf_init)(struct net_device dev);
		//short rate;
		short promisc;
		u32 mc_filter[2];
		/stats/
		struct Stats stats;
		struct iw_statistics wstats;
		@@ -1086,6 +1120,7 @@ typedef struct r8192_priv


		struct tasklet_struct irq_rx_tasklet;
		struct tasklet_struct irq_tx_tasklet;
		struct urb *rxurb_task;

		//2 Tx Related variables
		@@ -1112,6 +1147,7 @@ typedef struct r8192_priv
		struct ChnlAccessSetting ChannelAccessSetting;

		struct work_struct reset_wq;
		struct work_struct mcast_wq;

		/**********************************************************/
		//for rtl819xUsb
		@@ -1121,6 +1157,7 @@ typedef struct r8192_priv
		bool bDcut;
		bool bCurrentRxAggrEnable;
		u8 Rf_Mode; //add for Firmware RF -R/W switch
		u8 FwRsvdTxPageCfg;
		prt_firmware pFirmware;
		RTL8192SUSB_LOOPBACK_E LoopbackMode;
		bool usb_error;
		@@ -1129,12 +1166,19 @@ typedef struct r8192_priv
		u8 EEPROMThermalMeter;
		u8 EEPROMPwDiff;
		u8 EEPROMCrystalCap;
		u8 EEPROMBluetoothCoexist;
		u8 EEPROM_Def_Ver;
		u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
		u8 EEPROMTxPowerLevelCCK_V1[3];
		u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
		u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G

		u8 EEPROMOptional;
		u8 ShowRateMode;
		bool bForcedShowRxRate;

		u32 RfRegChnlVal[2];

		bool bDmDisableProtect;
		bool bIgnoreDiffRateTxPowerOffset;

		@@ -1169,6 +1213,8 @@ typedef struct r8192_priv
		u8 EEPROMTxPwrTkMode;

		u8 bTXPowerDataReadFromEEPORM;
		u8 EEPROMRegulatory;
		u8 EEPROMPwrGroup[2][3];

		u8 EEPROMVersion;
		u8 EEPROMUsbEndPointNumber;
		@@ -1201,8 +1247,11 @@ typedef struct r8192_priv
		u32 Pwr_Track;
		u8 TxPowerDiff;
		u8 AntennaTxPwDiff[2]; // Antenna gain offset, index 0 for B, 1 for C, and 2 for D
		u8 CrystalCap; // CrystalCap.
		u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
		u8 ThermalValue;
		u8 CrystalCap; // CrystalCap.
		u8 BluetoothCoexist;
		u8 ExternalPA;

		u8 CckPwEnl;
		// Use to calculate PWBD.
		@@ -1215,7 +1264,9 @@ typedef struct r8192_priv
		u8 SwChnlStep;
		u8 SetBWModeInProgress;
		HT_CHANNEL_WIDTH CurrentChannelBW;
		bool bChnlPlanFromHW;
		u8 ChannelPlan;
		u16 RegChannelPlan;
		u8 pwrGroupCnt;
		// 8190 40MHz mode
		//
		@@ -1246,6 +1297,8 @@ typedef struct r8192_priv
		bool btxpower_trackingInit;
		u8 OFDM_index;
		u8 CCK_index;
		u8 Record_CCK_20Mindex;
		u8 Record_CCK_40Mindex;
		// CCK TX Power Tracking
		ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength];
		ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
		@@ -1263,6 +1316,11 @@ typedef struct r8192_priv
		bool bcck_in_ch14;
		bool btxpowerdata_readfromEEPORM;
		u16 TSSI_13dBm;
		u8 CCKPresentAttentuation_20Mdefault;
		u8 CCKPresentAttentuation_40Mdefault;
		char CCKPresentAttentuation_difference;
		char CCKPresentAttentuation;
		bool bDMInitialGainEnable;
		//For Backup Initial Gain
		init_gain initgain_backup;
		u8 DefaultInitialGain[4];
		@@ -1287,6 +1345,13 @@ typedef struct r8192_priv
		// gpio
		bool bHwRadioOff;

		bool isRFOff;
		bool bInPowerSaveMode;

		bool RFChangeInProgress;
		bool RegRfOff;
		u8 bHwRfOffAction;

		u32 reset_count;
		bool bpbc_pressed;
		// debug
		@@ -1307,6 +1372,7 @@ typedef struct r8192_priv
		int IrpPendingCount;
		bool bResetInProgress;
		bool force_reset;
		bool force_lps;
		u8 InitialGainOperateType;

		u16 SifsTime;
		@@ -1402,6 +1468,9 @@ struct ssid_thread {
		};
		#endif

		void LedControl8192SUsb(struct net_device *dev, LED_CTL_MODE LedAction);
		void InitSwLeds(struct net_device *dev);
		void DeInitSwLeds(struct net_device *dev);
		short rtl8192SU_tx_cmd(struct net_device dev, struct sk_buff skb);
		short rtl8192SU_tx(struct net_device dev, struct sk_buff skb);
		bool FirmwareDownload92S(struct net_device *dev);

Admin message