+37
−0
include/trace/events/i2c.h
0 → 100644
+150
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Add tracepoints into the I2C message transfer function to retrieve the message sent or received. The following config options must be turned on to make use of the facility: CONFIG_FTRACE CONFIG_ENABLE_DEFAULT_TRACERS The I2C tracepoint can be enabled thusly: echo 1 >/sys/kernel/debug/tracing/events/i2c/enable and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace that look like: ... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14] ... i2c_read: i2c-5 #1 a=044 f=0001 l=4 ... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00] ... i2c_result: i2c-5 n=2 ret=2 formatted as: i2c-<adapter-nr> #<message-array-index> a=<addr> f=<flags> l=<datalen> n=<message-array-size> ret=<result> [<data>] The operation is done between the i2c_write/i2c_read lines and the i2c_reply and i2c_result lines so that if the hardware hangs, the trace buffer can be consulted to determine the problematic operation. The adapters to be traced can be selected by something like: echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter These changes are based on code from Steven Rostedt. Signed-off-by:Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> [wsa: adapted path for 'enable' in the commit msg] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
CRA Git | Maintained and supported by SUSTech CRA and CCSE