[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. (d941caa2) · Commits · 戴 / test

arch/arm/mach-ep93xx/Kconfig

+25 −0

Original line number	Diff line number	Diff line
		@@ -51,6 +51,31 @@ config MACH_GESBC9312
		Say 'Y' here if you want your kernel to support the Glomation
		GESBC-9312-sx board.

		config MACH_MICRO9
		bool
		default n

		config MACH_MICRO9H
		bool "Support Contec Hypercontrol Micro9-H"
		select MACH_MICRO9
		help
		Say 'Y' here if you want your kernel to support the
		Contec Hypercontrol Micro9-H board.

		config MACH_MICRO9M
		bool "Support Contec Hypercontrol Micro9-M"
		select MACH_MICRO9
		help
		Say 'Y' here if you want your kernel to support the
		Contec Hypercontrol Micro9-M board.

		config MACH_MICRO9L
		bool "Support Contec Hypercontrol Micro9-L"
		select MACH_MICRO9
		help
		Say 'Y' here if you want your kernel to support the
		Contec Hypercontrol Micro9-L board.

		config MACH_TS72XX
		bool "Support Technologic Systems TS-72xx SBC"
		help

arch/arm/mach-ep93xx/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -13,4 +13,5 @@ obj-$(CONFIG_MACH_EDB9312) += edb9312.o
		obj-$(CONFIG_MACH_EDB9315) += edb9315.o
		obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
		obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
		obj-$(CONFIG_MACH_MICRO9) += micro9.o
		obj-$(CONFIG_MACH_TS72XX) += ts72xx.o

arch/arm/mach-ep93xx/micro9.c

0 → 100644

+157 −0

Original line number	Diff line number	Diff line
		/*
		* linux/arch/arm/mach-ep93xx/micro9.c
		*
		* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
		* Manfred Gruber <manfred.gruber@contec.at>
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 as
		* published by the Free Software Foundation.
		*/

		#include <linux/init.h>
		#include <linux/interrupt.h>
		#include <linux/ioport.h>
		#include <linux/kernel.h>
		#include <linux/mm.h>
		#include <linux/platform_device.h>
		#include <linux/sched.h>

		#include <linux/mtd/physmap.h>

		#include <asm/io.h>
		#include <asm/hardware.h>

		#include <asm/mach/arch.h>
		#include <asm/mach-types.h>

		static struct ep93xx_eth_data micro9_eth_data = {
		.phy_id = 0x1f,
		};

		static struct resource micro9_eth_resource[] = {
		{
		.start = EP93XX_ETHERNET_PHYS_BASE,
		.end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
		.flags = IORESOURCE_MEM,
		}, {
		.start = IRQ_EP93XX_ETHERNET,
		.end = IRQ_EP93XX_ETHERNET,
		.flags = IORESOURCE_IRQ,
		}
		};

		static struct platform_device micro9_eth_device = {
		.name = "ep93xx-eth",
		.id = -1,
		.dev = {
		.platform_data = &micro9_eth_data,
		},
		.num_resources = ARRAY_SIZE(micro9_eth_resource),
		.resource = micro9_eth_resource,
		};

		static void __init micro9_eth_init(void)
		{
		memcpy(micro9_eth_data.dev_addr,
		(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
		platform_device_register(&micro9_eth_device);
		}

		static void __init micro9_init(void)
		{
		micro9_eth_init();
		}

		/*
		* Micro9-H
		*/
		#ifdef CONFIG_MACH_MICRO9H
		static struct physmap_flash_data micro9h_flash_data = {
		.width = 4,
		};

		static struct resource micro9h_flash_resource = {
		.start = 0x10000000,
		.end = 0x13ffffff,
		.flags = IORESOURCE_MEM,
		};

		static struct platform_device micro9h_flash = {
		.name = "physmap-flash",
		.id = 0,
		.dev = {
		.platform_data = &micro9h_flash_data,
		},
		.num_resources = 1,
		.resource = &micro9h_flash_resource,
		};

		static void __init micro9h_init(void)
		{
		platform_device_register(&micro9h_flash);
		}

		static void __init micro9h_init_machine(void)
		{
		ep93xx_init_devices();
		micro9_init();
		micro9h_init();
		}

		MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
		/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
		.phys_io = EP93XX_APB_PHYS_BASE,
		.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
		.boot_params = 0x00000100,
		.map_io = ep93xx_map_io,
		.init_irq = ep93xx_init_irq,
		.timer = &ep93xx_timer,
		.init_machine = micro9h_init_machine,
		MACHINE_END
		#endif

		/*
		* Micro9-M
		*/
		#ifdef CONFIG_MACH_MICRO9M
		static void __init micro9m_init_machine(void)
		{
		ep93xx_init_devices();
		micro9_init();
		}

		MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
		/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
		.phys_io = EP93XX_APB_PHYS_BASE,
		.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
		.boot_params = 0x00000100,
		.map_io = ep93xx_map_io,
		.init_irq = ep93xx_init_irq,
		.timer = &ep93xx_timer,
		.init_machine = micro9m_init_machine,
		MACHINE_END
		#endif

		/*
		* Micro9-L
		*/
		#ifdef CONFIG_MACH_MICRO9L
		static void __init micro9l_init_machine(void)
		{
		ep93xx_init_devices();
		micro9_init();
		}

		MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
		/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
		.phys_io = EP93XX_APB_PHYS_BASE,
		.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
		.boot_params = 0x00000100,
		.map_io = ep93xx_map_io,
		.init_irq = ep93xx_init_irq,
		.timer = &ep93xx_timer,
		.init_machine = micro9l_init_machine,
		MACHINE_END
		#endif

Admin message