Commit d8c62a91 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'pktgen-scripts' 

Jesper Dangaard Brouer says:

====================
pktgen samples: new scripts and removing older samples

This patchset is adding some pktgen sample scripts that I've been
using for a while[1], and they seams to relevant for more people.

Patchset also remove some of the older style pktgen samples.

[1] https://github.com/netoptimizer/network-testing/tree/master/pktgen


====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 53d94892 d3c937bb

samples/pktgen/pktgen.conf-1-1-flows

deleted100755 → 0
+0 −67
Original line number Diff line number Diff line 
#!/bin/bash



#modprobe pktgen





function pgset() {

    local result



    echo $1 > $PGDEV



    result=`cat $PGDEV | fgrep "Result: OK:"`

    if [ "$result" = "" ]; then

         cat $PGDEV | fgrep Result:

    fi

}



# Config Start Here -----------------------------------------------------------





# thread config

# Each CPU has its own thread. One CPU example. We add eth1.



PGDEV=/proc/net/pktgen/kpktgend_0

  echo "Removing all devices"

 pgset "rem_device_all"

  echo "Adding eth1"

 pgset "add_device eth1"





# device config

# delay 0

# We need to do alloc for every skb since we cannot clone here.



CLONE_SKB="clone_skb 0"

# NIC adds 4 bytes CRC

PKT_SIZE="pkt_size 60"



# COUNT 0 means forever

#COUNT="count 0"

COUNT="count 10000000"

DELAY="delay 0"



PGDEV=/proc/net/pktgen/eth1

  echo "Configuring $PGDEV"

 pgset "$COUNT"

 pgset "$CLONE_SKB"

 pgset "$PKT_SIZE"

 pgset "$DELAY"

 # Random address with in the min-max range

 pgset "flag IPDST_RND"

 pgset "dst_min 10.0.0.0"

 pgset "dst_max 10.255.255.255"



 # 8k Concurrent flows at 4 pkts

 pgset "flows 8192"

 pgset "flowlen 4"



 pgset "dst_mac  00:04:23:08:91:dc"



# Time to run

PGDEV=/proc/net/pktgen/pgctrl



 echo "Running... ctrl^C to stop"

 trap true INT

 pgset "start"

 echo "Done"

 cat /proc/net/pktgen/eth1

samples/pktgen/pktgen.conf-1-1-rdos

deleted100755 → 0
+0 −64
Original line number Diff line number Diff line 
#!/bin/bash



#modprobe pktgen





function pgset() {

    local result



    echo $1 > $PGDEV



    result=`cat $PGDEV | fgrep "Result: OK:"`

    if [ "$result" = "" ]; then

         cat $PGDEV | fgrep Result:

    fi

}



# Config Start Here -----------------------------------------------------------





# thread config

# Each CPU has its own thread. One CPU example. We add eth1.



PGDEV=/proc/net/pktgen/kpktgend_0

  echo "Removing all devices"

 pgset "rem_device_all"

  echo "Adding eth1"

 pgset "add_device eth1"





# device config

# delay 0



# We need to do alloc for every skb since we cannot clone here.



CLONE_SKB="clone_skb 0"

# NIC adds 4 bytes CRC

PKT_SIZE="pkt_size 60"



# COUNT 0 means forever

#COUNT="count 0"

COUNT="count 10000000"

DELAY="delay 0"



PGDEV=/proc/net/pktgen/eth1

  echo "Configuring $PGDEV"

 pgset "$COUNT"

 pgset "$CLONE_SKB"

 pgset "$PKT_SIZE"

 pgset "$DELAY"

 # Random address with in the min-max range

 pgset "flag IPDST_RND"

 pgset "dst_min 10.0.0.0"

 pgset "dst_max 10.255.255.255"



 pgset "dst_mac  00:04:23:08:91:dc"



# Time to run

PGDEV=/proc/net/pktgen/pgctrl



 echo "Running... ctrl^C to stop"

 trap true INT

 pgset "start"

 echo "Done"

 cat /proc/net/pktgen/eth1

samples/pktgen/pktgen_sample04_many_flows.sh

0 → 100755
+93 −0
Original line number Diff line number Diff line 
#!/bin/bash

#

# Script example for many flows testing

#

# Number of simultaneous flows limited by variable $FLOWS

# and number of packets per flow controlled by variable $FLOWLEN

#

basedir=`dirname $0`

source ${basedir}/functions.sh

root_check_run_with_sudo "$@"



# Parameter parsing via include

source ${basedir}/parameters.sh

# Set some default params, if they didn't get set

[ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"

[ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"

[ -z "$CLONE_SKB" ] && CLONE_SKB="0"



# NOTICE:  Script specific settings

# =======

# Limiting the number of concurrent flows ($FLOWS)

# and also set how many packets each flow contains ($FLOWLEN)

#

[ -z "$FLOWS" ]     && FLOWS="8000"

[ -z "$FLOWLEN" ]   && FLOWLEN="10"



# Base Config

DELAY="0"  # Zero means max speed

COUNT="0"  # Zero means indefinitely



if [[ -n "$BURST" ]]; then

    err 1 "Bursting not supported for this mode"

fi



# General cleanup everything since last run

pg_ctrl "reset"



# Threads are specified with parameter -t value in $THREADS

for ((thread = 0; thread < $THREADS; thread++)); do

    dev=${DEV}@${thread}



    # Add remove all other devices and add_device $dev to thread

    pg_thread $thread "rem_device_all"

    pg_thread $thread "add_device" $dev



    # Base config

    pg_set $dev "flag QUEUE_MAP_CPU"

    pg_set $dev "count $COUNT"

    pg_set $dev "clone_skb $CLONE_SKB"

    pg_set $dev "pkt_size $PKT_SIZE"

    pg_set $dev "delay $DELAY"

    pg_set $dev "flag NO_TIMESTAMP"



    # Single destination

    pg_set $dev "dst_mac $DST_MAC"

    pg_set $dev "dst $DEST_IP"



    # Randomize source IP-addresses

    pg_set $dev "flag IPSRC_RND"

    pg_set $dev "src_min 198.18.0.0"

    pg_set $dev "src_max 198.19.255.255"



    # Limit number of flows (max 65535)

    pg_set $dev "flows $FLOWS"

    #

    # How many packets a flow will send, before flow "entry" is

    # re-generated/setup.

    pg_set $dev "flowlen $FLOWLEN"

    #

    # Flag FLOW_SEQ will cause $FLOWLEN packets from the same flow

    # being send back-to-back, before next flow is selected

    # incrementally.  This helps lookup caches, and is more realistic.

    #

    pg_set $dev "flag FLOW_SEQ"



done



# Run if user hits control-c

function print_result() {

    # Print results

    for ((thread = 0; thread < $THREADS; thread++)); do

	dev=${DEV}@${thread}

	echo "Device: $dev"

	cat /proc/net/pktgen/$dev | grep -A2 "Result:"

    done

}

# trap keyboard interrupt (Ctrl-C)

trap true SIGINT



echo "Running... ctrl^C to stop" >&2

pg_ctrl "start"



print_result

samples/pktgen/pktgen_sample05_flow_per_thread.sh

0 → 100755
+81 −0
Original line number Diff line number Diff line 
#!/bin/bash

#

# Script will generate one flow per thread (-t N)

#  - Same destination IP

#  - Fake source IPs for each flow (fixed based on thread number)

#

# Useful for scale testing on receiver, to see whether silo'ing flows

# works and scales.  For optimal scalability (on receiver) each

# separate-flow should not access shared variables/data. This script

# helps magnify any of these scaling issues by overloading the receiver.

#

basedir=`dirname $0`

source ${basedir}/functions.sh

root_check_run_with_sudo "$@"



# Parameter parsing via include

source ${basedir}/parameters.sh

# Set some default params, if they didn't get set

[ -z "$DEST_IP" ]   && DEST_IP="198.18.0.42"

[ -z "$DST_MAC" ]   && DST_MAC="90:e2:ba:ff:ff:ff"

[ -z "$CLONE_SKB" ] && CLONE_SKB="0"

[ -z "$BURST" ]     && BURST=32





# Base Config

DELAY="0"  # Zero means max speed

COUNT="0"  # Zero means indefinitely



# General cleanup everything since last run

pg_ctrl "reset"



# Threads are specified with parameter -t value in $THREADS

for ((thread = 0; thread < $THREADS; thread++)); do

    dev=${DEV}@${thread}



    # Add remove all other devices and add_device $dev to thread

    pg_thread $thread "rem_device_all"

    pg_thread $thread "add_device" $dev



    # Base config

    pg_set $dev "flag QUEUE_MAP_CPU"

    pg_set $dev "count $COUNT"

    pg_set $dev "clone_skb $CLONE_SKB"

    pg_set $dev "pkt_size $PKT_SIZE"

    pg_set $dev "delay $DELAY"

    pg_set $dev "flag NO_TIMESTAMP"



    # Single destination

    pg_set $dev "dst_mac $DST_MAC"

    pg_set $dev "dst $DEST_IP"



    # Setup source IP-addresses based on thread number

    pg_set $dev "src_min 198.18.$((thread+1)).1"

    pg_set $dev "src_max 198.18.$((thread+1)).1"



    # Setup burst, for easy testing -b 0 disable bursting

    # (internally in pktgen default and minimum burst=1)

    if [[ ${BURST} -ne 0 ]]; then

	pg_set $dev "burst $BURST"

    else

	info "$dev: Not using burst"

    fi



done



# Run if user hits control-c

function print_result() {

    # Print results

    for ((thread = 0; thread < $THREADS; thread++)); do

	dev=${DEV}@${thread}

	echo "Device: $dev"

	cat /proc/net/pktgen/$dev | grep -A2 "Result:"

    done

}

# trap keyboard interrupt (Ctrl-C)

trap true SIGINT



echo "Running... ctrl^C to stop" >&2

pg_ctrl "start"



print_result

CRA Git | Maintained and supported by SUSTech CRA and CCSE