Commit d8c5d658 authored by Samuel Ortiz's avatar Samuel Ortiz
Browse files

Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linux 

A complete refurbished series inclunding:
- DT support for the MFD, TSC and ADC driver & platform device support,
  which has no users, has been killed.
- iio_map from last series is gone and replaced by proper nodes in the
  device tree.
- suspend fixes which means correct data structs are taken and no
  interrupt storm
- fifo split which should problem with TSC & ADC beeing used at the same
  time
- The ADC channels are now checked before blindly applied. That means the
  touch part reads X, Y and Z coordinates and does not mix them up. Same
  goes for the IIO ADC driver.
- The IIO ADC driver now creates files named in_voltageX_raw where X
  represents the ADC line instead of a number starting at 0. A read from
  this file can return -EBUSY in case touch is busy and the ADC didn't
  collect a value.
parents a1ace0aa 1460c152

Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

0 → 100644
+44 −0
Original line number Diff line number Diff line 
* TI - TSC ADC (Touschscreen and analog digital converter)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Required properties:

- child "tsc"

	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen

		  support on the platform.

	ti,x-plate-resistance: X plate resistance

	ti,coordiante-readouts: The sequencer supports a total of 16

				programmable steps each step is used to

				read a single coordinate. A single

                                readout is enough but multiple reads can

				increase the quality.

				A value of 5 means, 5 reads for X, 5 for

				Y and 2 for Z (always). This utilises 12

				of the 16 software steps available. The

				remaining 4 can be used by the ADC.

	ti,wire-config: Different boards could have a different order for

			connecting wires on touchscreen. We need to provide an

			8 bit number where in the 1st four bits represent the

			analog lines and the next 4 bits represent positive/

			negative terminal on that input line. Notations to

			represent the input lines and terminals resoectively

			is as follows:

			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.

			XP  = 0, XN = 1, YP = 2, YN = 3.

- child "adc"

	ti,adc-channels: List of analog inputs available for ADC.

			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.



Example:

	tscadc: tscadc@44e0d000 {

		compatible = "ti,am3359-tscadc";

		tsc {

			ti,wires = <4>;

			ti,x-plate-resistance = <200>;

			ti,coordiante-readouts = <5>;

			ti,wire-config = <0x00 0x11 0x22 0x33>;

		};



		adc {

			ti,adc-channels = <4 5 6 7>;

		};

	}

arch/arm/boot/dts/am335x-evm.dts

+14 −0
Original line number Diff line number Diff line
@@ -244,3 +244,17 @@ 
&cpsw_emac1 {

	phy_id = <&davinci_mdio>, <1>;

};



&tscadc {

	status = "okay";

	tsc {

		ti,wires = <4>;

		ti,x-plate-resistance = <200>;

		ti,coordiante-readouts = <5>;

		ti,wire-config = <0x00 0x11 0x22 0x33>;

	};



	adc {

		ti,adc-channels = <4 5 6 7>;

	};

};

arch/arm/boot/dts/am33xx.dtsi

+18 −0
Original line number Diff line number Diff line
@@ -404,6 +404,24 @@ 
			ti,hwmods = "wkup_m3";

		};



		tscadc: tscadc@44e0d000 {

			compatible = "ti,am3359-tscadc";

			reg = <0x44e0d000 0x1000>;

			interrupt-parent = <&intc>;

			interrupts = <16>;

			ti,hwmods = "adc_tsc";

			status = "disabled";



			tsc {

				compatible = "ti,am3359-tsc";

			};

			am335x_adc: adc {

				#io-channel-cells = <1>;

				compatible = "ti,am3359-adc";

			};



		};



		gpmc: gpmc@50000000 {

			compatible = "ti,am3352-gpmc";

			ti,hwmods = "gpmc";

drivers/iio/adc/ti_am335x_adc.c

+100 −32
Original line number Diff line number Diff line
@@ -22,13 +22,18 @@ 
#include <linux/platform_device.h>

#include <linux/io.h>

#include <linux/iio/iio.h>

#include <linux/of.h>

#include <linux/of_device.h>

#include <linux/iio/machine.h>

#include <linux/iio/driver.h>



#include <linux/mfd/ti_am335x_tscadc.h>

#include <linux/platform_data/ti_am335x_adc.h>



struct tiadc_device {

	struct ti_tscadc_dev *mfd_tscadc;

	int channels;

	u8 channel_line[8];

	u8 channel_step[8];

};



static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -42,10 +47,20 @@ static void tiadc_writel(struct tiadc_device *adc, unsigned int reg, 
	writel(val, adc->mfd_tscadc->tscadc_base + reg);

}



static u32 get_adc_step_mask(struct tiadc_device *adc_dev)

{

	u32 step_en;



	step_en = ((1 << adc_dev->channels) - 1);

	step_en <<= TOTAL_STEPS - adc_dev->channels + 1;

	return step_en;

}



static void tiadc_step_config(struct tiadc_device *adc_dev)

{

	unsigned int stepconfig;

	int i, channels = 0, steps;

	int i, steps;

	u32 step_en;



	/*

	 * There are 16 configurable steps and 8 analog input
@@ -58,43 +73,63 @@ static void tiadc_step_config(struct tiadc_device *adc_dev) 
	 */



	steps = TOTAL_STEPS - adc_dev->channels;

	channels = TOTAL_CHANNELS - adc_dev->channels;



	stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;



	for (i = (steps + 1); i <= TOTAL_STEPS; i++) {

		tiadc_writel(adc_dev, REG_STEPCONFIG(i),

				stepconfig | STEPCONFIG_INP(channels));

		tiadc_writel(adc_dev, REG_STEPDELAY(i),

	for (i = 0; i < adc_dev->channels; i++) {

		int chan;



		chan = adc_dev->channel_line[i];

		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),

				stepconfig | STEPCONFIG_INP(chan));

		tiadc_writel(adc_dev, REG_STEPDELAY(steps),

				STEPCONFIG_OPENDLY);

		channels++;

		adc_dev->channel_step[i] = steps;

		steps++;

	}

	tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);

	step_en = get_adc_step_mask(adc_dev);

	am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);

}



static const char * const chan_name_ain[] = {

	"AIN0",

	"AIN1",

	"AIN2",

	"AIN3",

	"AIN4",

	"AIN5",

	"AIN6",

	"AIN7",

};



static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)

{

	struct tiadc_device *adc_dev = iio_priv(indio_dev);

	struct iio_chan_spec *chan_array;

	struct iio_chan_spec *chan;

	int i;



	indio_dev->num_channels = channels;

	chan_array = kcalloc(indio_dev->num_channels,

	chan_array = kcalloc(channels,

			sizeof(struct iio_chan_spec), GFP_KERNEL);



	if (chan_array == NULL)

		return -ENOMEM;



	for (i = 0; i < (indio_dev->num_channels); i++) {

		struct iio_chan_spec *chan = chan_array + i;

	chan = chan_array;

	for (i = 0; i < channels; i++, chan++) {



		chan->type = IIO_VOLTAGE;

		chan->indexed = 1;

		chan->channel = i;

		chan->channel = adc_dev->channel_line[i];

		chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);

		chan->datasheet_name = chan_name_ain[chan->channel];

		chan->scan_type.sign = 'u';

		chan->scan_type.realbits = 12;

		chan->scan_type.storagebits = 32;

	}



	indio_dev->channels = chan_array;



	return indio_dev->num_channels;

	return 0;

}



static void tiadc_channels_remove(struct iio_dev *indio_dev)
@@ -108,7 +143,9 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, 
{

	struct tiadc_device *adc_dev = iio_priv(indio_dev);

	int i;

	unsigned int fifo1count, readx1;

	unsigned int fifo1count, read;

	u32 step = UINT_MAX;

	bool found = false;



	/*

	 * When the sub-system is first enabled,
@@ -121,14 +158,26 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, 
	 * Hence we need to flush out this data.

	 */



	for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {

		if (chan->channel == adc_dev->channel_line[i]) {

			step = adc_dev->channel_step[i];

			break;

		}

	}

	if (WARN_ON_ONCE(step == UINT_MAX))

		return -EINVAL;



	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);

	for (i = 0; i < fifo1count; i++) {

		readx1 = tiadc_readl(adc_dev, REG_FIFO1);

		if (i == chan->channel)

			*val = readx1 & 0xfff;

		read = tiadc_readl(adc_dev, REG_FIFO1);

		if (read >> 16 == step) {

			*val = read & 0xfff;

			found = true;

		}

	tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);



	}

	am335x_tsc_se_update(adc_dev->mfd_tscadc);

	if (found == false)

		return -EBUSY;

	return IIO_VAL_INT;

}
@@ -140,13 +189,15 @@ static int tiadc_probe(struct platform_device *pdev) 
{

	struct iio_dev		*indio_dev;

	struct tiadc_device	*adc_dev;

	struct ti_tscadc_dev	*tscadc_dev = pdev->dev.platform_data;

	struct mfd_tscadc_board	*pdata;

	struct device_node	*node = pdev->dev.of_node;

	struct property		*prop;

	const __be32		*cur;

	int			err;

	u32			val;

	int			channels = 0;



	pdata = tscadc_dev->dev->platform_data;

	if (!pdata || !pdata->adc_init) {

		dev_err(&pdev->dev, "Could not find platform data\n");

	if (!node) {

		dev_err(&pdev->dev, "Could not find valid DT data.\n");

		return -EINVAL;

	}
@@ -158,8 +209,13 @@ static int tiadc_probe(struct platform_device *pdev) 
	}

	adc_dev = iio_priv(indio_dev);



	adc_dev->mfd_tscadc = tscadc_dev;

	adc_dev->channels = pdata->adc_init->adc_channels;

	adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);



	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {

		adc_dev->channel_line[channels] = val;

		channels++;

	}

	adc_dev->channels = channels;



	indio_dev->dev.parent = &pdev->dev;

	indio_dev->name = dev_name(&pdev->dev);
@@ -191,10 +247,15 @@ err_ret: 
static int tiadc_remove(struct platform_device *pdev)

{

	struct iio_dev *indio_dev = platform_get_drvdata(pdev);

	struct tiadc_device *adc_dev = iio_priv(indio_dev);

	u32 step_en;



	iio_device_unregister(indio_dev);

	tiadc_channels_remove(indio_dev);



	step_en = get_adc_step_mask(adc_dev);

	am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en);



	iio_device_free(indio_dev);



	return 0;
@@ -205,9 +266,10 @@ static int tiadc_suspend(struct device *dev) 
{

	struct iio_dev *indio_dev = dev_get_drvdata(dev);

	struct tiadc_device *adc_dev = iio_priv(indio_dev);

	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;

	struct ti_tscadc_dev *tscadc_dev;

	unsigned int idle;



	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));

	if (!device_may_wakeup(tscadc_dev->dev)) {

		idle = tiadc_readl(adc_dev, REG_CTRL);

		idle &= ~(CNTRLREG_TSCSSENB);
@@ -243,16 +305,22 @@ static const struct dev_pm_ops tiadc_pm_ops = { 
#define TIADC_PM_OPS NULL

#endif



static const struct of_device_id ti_adc_dt_ids[] = {

	{ .compatible = "ti,am3359-adc", },

	{ }

};

MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);



static struct platform_driver tiadc_driver = {

	.driver = {

		.name   = "tiadc",

		.name   = "TI-am335x-adc",

		.owner	= THIS_MODULE,

		.pm	= TIADC_PM_OPS,

		.of_match_table = of_match_ptr(ti_adc_dt_ids),

	},

	.probe	= tiadc_probe,

	.remove	= tiadc_remove,

};



module_platform_driver(tiadc_driver);



MODULE_DESCRIPTION("TI ADC controller driver");

drivers/input/touchscreen/ti_am335x_tsc.c

+203 −85
Original line number Diff line number Diff line
@@ -24,8 +24,9 @@ 
#include <linux/clk.h>

#include <linux/platform_device.h>

#include <linux/io.h>

#include <linux/input/ti_am335x_tsc.h>

#include <linux/delay.h>

#include <linux/of.h>

#include <linux/of_device.h>



#include <linux/mfd/ti_am335x_tscadc.h>
@@ -33,6 +34,13 @@ 
#define SEQ_SETTLE		275

#define MAX_12BIT		((1 << 12) - 1)



static const int config_pins[] = {

	STEPCONFIG_XPP,

	STEPCONFIG_XNN,

	STEPCONFIG_YPP,

	STEPCONFIG_YNN,

};



struct titsc {

	struct input_dev	*input;

	struct ti_tscadc_dev	*mfd_tscadc;
@@ -40,7 +48,10 @@ struct titsc { 
	unsigned int		wires;

	unsigned int		x_plate_resistance;

	bool			pen_down;

	int			steps_to_configure;

	int			coordinate_readouts;

	u32			config_inp[4];

	u32			bit_xp, bit_xn, bit_yp, bit_yn;

	u32			inp_xp, inp_xn, inp_yp, inp_yn;

};



static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg, 
	writel(val, tsc->mfd_tscadc->tscadc_base + reg);

}



static int titsc_config_wires(struct titsc *ts_dev)

{

	u32 analog_line[4];

	u32 wire_order[4];

	int i, bit_cfg;



	for (i = 0; i < 4; i++) {

		/*

		 * Get the order in which TSC wires are attached

		 * w.r.t. each of the analog input lines on the EVM.

		 */

		analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;

		wire_order[i] = ts_dev->config_inp[i] & 0x0F;

		if (WARN_ON(analog_line[i] > 7))

			return -EINVAL;

		if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))

			return -EINVAL;

	}



	for (i = 0; i < 4; i++) {

		int an_line;

		int wi_order;



		an_line = analog_line[i];

		wi_order = wire_order[i];

		bit_cfg = config_pins[wi_order];

		if (bit_cfg == 0)

			return -EINVAL;

		switch (wi_order) {

		case 0:

			ts_dev->bit_xp = bit_cfg;

			ts_dev->inp_xp = an_line;

			break;



		case 1:

			ts_dev->bit_xn = bit_cfg;

			ts_dev->inp_xn = an_line;

			break;



		case 2:

			ts_dev->bit_yp = bit_cfg;

			ts_dev->inp_yp = an_line;

			break;

		case 3:

			ts_dev->bit_yn = bit_cfg;

			ts_dev->inp_yn = an_line;

			break;

		}

	}

	return 0;

}



static void titsc_step_config(struct titsc *ts_dev)

{

	unsigned int	config;

	int i, total_steps;



	/* Configure the Step registers */

	total_steps = 2 * ts_dev->steps_to_configure;

	int i;

	int end_step;

	u32 stepenable;



	config = STEPCONFIG_MODE_HWSYNC |

			STEPCONFIG_AVG_16 | STEPCONFIG_XPP;

			STEPCONFIG_AVG_16 | ts_dev->bit_xp;

	switch (ts_dev->wires) {

	case 4:

		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;

		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;

		break;

	case 5:

		config |= STEPCONFIG_YNN |

				STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |

				STEPCONFIG_YPP;

		config |= ts_dev->bit_yn |

				STEPCONFIG_INP_AN4 | ts_dev->bit_xn |

				ts_dev->bit_yp;

		break;

	case 8:

		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;

		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;

		break;

	}



	for (i = 1; i <= ts_dev->steps_to_configure; i++) {

	/* 1 … coordinate_readouts is for X */

	end_step = ts_dev->coordinate_readouts;

	for (i = 0; i < end_step; i++) {

		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);

		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);

	}



	config = 0;

	config = STEPCONFIG_MODE_HWSYNC |

			STEPCONFIG_AVG_16 | STEPCONFIG_YNN |

			STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;

			STEPCONFIG_AVG_16 | ts_dev->bit_yn |

			STEPCONFIG_INM_ADCREFM;

	switch (ts_dev->wires) {

	case 4:

		config |= STEPCONFIG_YPP;

		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);

		break;

	case 5:

		config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |

				STEPCONFIG_XNP | STEPCONFIG_YPN;

		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |

				ts_dev->bit_xn | ts_dev->bit_yp;

		break;

	case 8:

		config |= STEPCONFIG_YPP;

		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);

		break;

	}



	for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {

	/* coordinate_readouts … coordinate_readouts * 2 is for Y */

	end_step = ts_dev->coordinate_readouts * 2;

	for (i = ts_dev->coordinate_readouts; i < end_step; i++) {

		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);

		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);

	}



	config = 0;

	/* Charge step configuration */

	config = STEPCONFIG_XPP | STEPCONFIG_YNN |

	config = ts_dev->bit_xp | ts_dev->bit_yn |

			STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |

			STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;

			STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);



	titsc_writel(ts_dev, REG_CHARGECONFIG, config);

	titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);



	config = 0;

	/* Configure to calculate pressure */

	/* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */

	config = STEPCONFIG_MODE_HWSYNC |

			STEPCONFIG_AVG_16 | STEPCONFIG_YPP |

			STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;

	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);

	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),

			STEPCONFIG_AVG_16 | ts_dev->bit_yp |

			ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |

			STEPCONFIG_INP(ts_dev->inp_xp);

	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);

	titsc_writel(ts_dev, REG_STEPDELAY(end_step),

			STEPCONFIG_OPENDLY);



	config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;

	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);

	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),

	end_step++;

	config |= STEPCONFIG_INP(ts_dev->inp_yn);

	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);

	titsc_writel(ts_dev, REG_STEPDELAY(end_step),

			STEPCONFIG_OPENDLY);



	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);

	/* The steps1 … end and bit 0 for TS_Charge */

	stepenable = (1 << (end_step + 2)) - 1;

	am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);

}



static void titsc_read_coordinates(struct titsc *ts_dev,

				    unsigned int *x, unsigned int *y)

		u32 *x, u32 *y, u32 *z1, u32 *z2)

{

	unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);

	unsigned int prev_val_x = ~0, prev_val_y = ~0;

	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;

	unsigned int read, diff;

	unsigned int i, channel;

	unsigned int creads = ts_dev->coordinate_readouts;



	*z1 = *z2 = 0;

	if (fifocount % (creads * 2 + 2))

		fifocount -= fifocount % (creads * 2 + 2);

	/*

	 * Delta filter is used to remove large variations in sampled

	 * values from ADC. The filter tries to predict where the next
@@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev, 
	 * algorithm compares the difference with that of a present value,

	 * if true the value is reported to the sub system.

	 */

	for (i = 0; i < fifocount - 1; i++) {

	for (i = 0; i < fifocount; i++) {

		read = titsc_readl(ts_dev, REG_FIFO0);

		channel = read & 0xf0000;

		channel = channel >> 0x10;

		if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {



		channel = (read & 0xf0000) >> 16;

		read &= 0xfff;

		if (channel < creads) {

			diff = abs(read - prev_val_x);

			if (diff < prev_diff_x) {

				prev_diff_x = diff;

				*x = read;

			}

			prev_val_x = read;

		}



		read = titsc_readl(ts_dev, REG_FIFO1);

		channel = read & 0xf0000;

		channel = channel >> 0x10;

		if ((channel >= ts_dev->steps_to_configure) &&

			(channel < (2 * ts_dev->steps_to_configure - 1))) {

			read &= 0xfff;

		} else if (channel < creads * 2) {

			diff = abs(read - prev_val_y);

			if (diff < prev_diff_y) {

				prev_diff_y = diff;

				*y = read;

			}

			prev_val_y = read;



		} else if (channel < creads * 2 + 1) {

			*z1 = read;



		} else if (channel < creads * 2 + 2) {

			*z2 = read;

		}

	}

}
@@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev) 
	unsigned int x = 0, y = 0;

	unsigned int z1, z2, z;

	unsigned int fsm;

	unsigned int fifo1count, fifo0count;

	int i;



	status = titsc_readl(ts_dev, REG_IRQSTATUS);

	if (status & IRQENB_FIFO0THRES) {

		titsc_read_coordinates(ts_dev, &x, &y);



		z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;

		z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;



		fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);

		for (i = 0; i < fifo1count; i++)

			titsc_readl(ts_dev, REG_FIFO1);



		fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);

		for (i = 0; i < fifo0count; i++)

			titsc_readl(ts_dev, REG_FIFO0);

		titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);



		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {

			/*
@@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev) 
			 * Resistance(touch) = x plate resistance *

			 * x postion/4096 * ((z2 / z1) - 1)

			 */

			z = z2 - z1;

			z = z1 - z2;

			z *= x;

			z *= ts_dev->x_plate_resistance;

			z /= z1;

			z /= z2;

			z = (z + 2047) >> 12;



			if (z <= MAX_12BIT) {
@@ -248,11 +308,54 @@ static irqreturn_t titsc_irq(int irq, void *dev) 
		irqclr |= IRQENB_PENUP;

	}



	titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);

	if (status & IRQENB_HW_PEN) {



		titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);

		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);

	}



	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);

	if (irqclr) {

		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);

		am335x_tsc_se_update(ts_dev->mfd_tscadc);

		return IRQ_HANDLED;

	}

	return IRQ_NONE;

}



static int titsc_parse_dt(struct platform_device *pdev,

					struct titsc *ts_dev)

{

	struct device_node *node = pdev->dev.of_node;

	int err;



	if (!node)

		return -EINVAL;



	err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);

	if (err < 0)

		return err;

	switch (ts_dev->wires) {

	case 4:

	case 5:

	case 8:

		break;

	default:

		return -EINVAL;

	}



	err = of_property_read_u32(node, "ti,x-plate-resistance",

			&ts_dev->x_plate_resistance);

	if (err < 0)

		return err;



	err = of_property_read_u32(node, "ti,coordiante-readouts",

			&ts_dev->coordinate_readouts);

	if (err < 0)

		return err;



	return of_property_read_u32_array(node, "ti,wire-config",

			ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));

}



/*

 * The functions for inserting/removing driver as a module.
@@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev) 
{

	struct titsc *ts_dev;

	struct input_dev *input_dev;

	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;

	struct mfd_tscadc_board	*pdata;

	struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);

	int err;



	pdata = tscadc_dev->dev->platform_data;



	if (!pdata) {

		dev_err(&pdev->dev, "Could not find platform data\n");

		return -EINVAL;

	}



	/* Allocate memory for device */

	ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);

	input_dev = input_allocate_device();
@@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev) 
	ts_dev->mfd_tscadc = tscadc_dev;

	ts_dev->input = input_dev;

	ts_dev->irq = tscadc_dev->irq;

	ts_dev->wires = pdata->tsc_init->wires;

	ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;

	ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;



	err = titsc_parse_dt(pdev, ts_dev);

	if (err) {

		dev_err(&pdev->dev, "Could not find valid DT data.\n");

		goto err_free_mem;

	}



	err = request_irq(ts_dev->irq, titsc_irq,

			  0, pdev->dev.driver->name, ts_dev);
@@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev) 
	}



	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);

	err = titsc_config_wires(ts_dev);

	if (err) {

		dev_err(&pdev->dev, "wrong i/p wire configuration\n");

		goto err_free_irq;

	}

	titsc_step_config(ts_dev);

	titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);

	titsc_writel(ts_dev, REG_FIFO0THR,

			ts_dev->coordinate_readouts * 2 + 2 - 1);



	input_dev->name = "ti-tsc";

	input_dev->dev.parent = &pdev->dev;
@@ -329,11 +433,16 @@ err_free_mem: 


static int titsc_remove(struct platform_device *pdev)

{

	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;

	struct titsc *ts_dev = tscadc_dev->tsc;

	struct titsc *ts_dev = platform_get_drvdata(pdev);

	u32 steps;



	free_irq(ts_dev->irq, ts_dev);



	/* total steps followed by the enable mask */

	steps = 2 * ts_dev->coordinate_readouts + 2;

	steps = (1 << steps) - 1;

	am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);



	input_unregister_device(ts_dev->input);



	platform_set_drvdata(pdev, NULL);
@@ -344,10 +453,11 @@ static int titsc_remove(struct platform_device *pdev) 
#ifdef CONFIG_PM

static int titsc_suspend(struct device *dev)

{

	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;

	struct titsc *ts_dev = tscadc_dev->tsc;

	struct titsc *ts_dev = dev_get_drvdata(dev);

	struct ti_tscadc_dev *tscadc_dev;

	unsigned int idle;



	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));

	if (device_may_wakeup(tscadc_dev->dev)) {

		idle = titsc_readl(ts_dev, REG_IRQENABLE);

		titsc_writel(ts_dev, REG_IRQENABLE,
@@ -359,9 +469,10 @@ static int titsc_suspend(struct device *dev) 


static int titsc_resume(struct device *dev)

{

	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;

	struct titsc *ts_dev = tscadc_dev->tsc;

	struct titsc *ts_dev = dev_get_drvdata(dev);

	struct ti_tscadc_dev *tscadc_dev;



	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));

	if (device_may_wakeup(tscadc_dev->dev)) {

		titsc_writel(ts_dev, REG_IRQWAKEUP,

				0x00);
@@ -369,7 +480,7 @@ static int titsc_resume(struct device *dev) 
	}

	titsc_step_config(ts_dev);

	titsc_writel(ts_dev, REG_FIFO0THR,

			ts_dev->steps_to_configure);

			ts_dev->coordinate_readouts * 2 + 2 - 1);

	return 0;

}
@@ -382,13 +493,20 @@ static const struct dev_pm_ops titsc_pm_ops = { 
#define TITSC_PM_OPS NULL

#endif



static const struct of_device_id ti_tsc_dt_ids[] = {

	{ .compatible = "ti,am3359-tsc", },

	{ }

};

MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);



static struct platform_driver ti_tsc_driver = {

	.probe	= titsc_probe,

	.remove	= titsc_remove,

	.driver	= {

		.name   = "tsc",

		.name   = "TI-am335x-tsc",

		.owner	= THIS_MODULE,

		.pm	= TITSC_PM_OPS,

		.of_match_table = of_match_ptr(ti_tsc_dt_ids),

	},

};

module_platform_driver(ti_tsc_driver);

CRA Git | Maintained and supported by SUSTech CRA and CCSE