+1
−0
Loading
KVM: PPC: Book3S HV: Implement functions to access quadrants 1 & 2
The POWER9 radix mmu has the concept of quadrants. The quadrant number is the two high bits of the effective address and determines the fully qualified address to be used for the translation. The fully qualified address consists of the effective lpid, the effective pid and the effective address. This gives then 4 possible quadrants 0, 1, 2, and 3. When accessing these quadrants the fully qualified address is obtained as follows: Quadrant | Hypervisor | Guest -------------------------------------------------------------------------- | EA[0:1] = 0b00 | EA[0:1] = 0b00 0 | effLPID = 0 | effLPID = LPIDR | effPID = PIDR | effPID = PIDR -------------------------------------------------------------------------- | EA[0:1] = 0b01 | 1 | effLPID = LPIDR | Invalid Access | effPID = PIDR | -------------------------------------------------------------------------- | EA[0:1] = 0b10 | 2 | effLPID = LPIDR | Invalid Access | effPID = 0 | -------------------------------------------------------------------------- | EA[0:1] = 0b11 | EA[0:1] = 0b11 3 | effLPID = 0 | effLPID = LPIDR | effPID = 0 | effPID = 0 -------------------------------------------------------------------------- In the Guest; Quadrant 3 is normally used to address the operating system since this uses effPID=0 and effLPID=LPIDR, meaning the PID register doesn't need to be switched. Quadrant 0 is normally used to address user space since the effLPID and effPID are taken from the corresponding registers. In the Host; Quadrant 0 and 3 are used as above, however the effLPID is always 0 to address the host. Quadrants 1 and 2 can be used by the host to address guest memory using a guest effective address. Since the effLPID comes from the LPID register, the host loads the LPID of the guest it would like to access (and the PID of the process) and can perform accesses to a guest effective address. This means quadrant 1 can be used to address the guest user space and quadrant 2 can be used to address the guest operating system from the hypervisor, using a guest effective address. Access to the quadrants can cause a Hypervisor Data Storage Interrupt (HDSI) due to being unable to perform partition scoped translation. Previously this could only be generated from a guest and so the code path expects us to take the KVM trampoline in the interrupt handler. This is no longer the case so we modify the handler to call bad_page_fault() to check if we were expecting this fault so we can handle it gracefully and just return with an error code. In the hash mmu case we still raise an unknown exception since quadrants aren't defined for the hash mmu. Signed-off-by:Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: