Commit d75b4a22 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller
Browse files

net: phy: Sort Makefile and Kconfig 



Sort the files to reduce merge conflicts and to make it easier to find
drivers by name. Also separate the MDIO bus drivers from the PHY
drivers, again to help find what you need.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d985d151

drivers/net/phy/Kconfig

+214 −213
Original line number Diff line number Diff line
@@ -15,85 +15,153 @@ if PHYLIB 
config SWPHY

	bool



comment "MII PHY device drivers"

comment "MDIO bus device drivers"



config AQUANTIA_PHY

        tristate "Drivers for the Aquantia PHYs"

        ---help---

          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405

config MDIO_BCM_IPROC

	tristate "Broadcom iProc MDIO bus controller"

	depends on ARCH_BCM_IPROC || COMPILE_TEST

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Broadcom iProc SoC's.



config AT803X_PHY

	tristate "Drivers for Atheros AT803X PHYs"

	---help---

	  Currently supports the AT8030 and AT8035 model

config MDIO_BCM_UNIMAC

	tristate "Broadcom UniMAC MDIO bus controller"

	depends on HAS_IOMEM

	help

	  This module provides a driver for the Broadcom UniMAC MDIO busses.

	  This hardware can be found in the Broadcom GENET Ethernet MAC

	  controllers as well as some Broadcom Ethernet switches such as the

	  Starfighter 2 switches.



config AMD_PHY

	tristate "Drivers for the AMD PHYs"

	---help---

	  Currently supports the am79c874

config MDIO_BITBANG

	tristate "Support for bitbanged MDIO buses"

	help

	  This module implements the MDIO bus protocol in software,

	  for use by low level drivers that export the ability to

	  drive the relevant pins.



config MARVELL_PHY

	tristate "Drivers for Marvell PHYs"

	---help---

	  Currently has a driver for the 88E1011S

	  If in doubt, say N.



config DAVICOM_PHY

	tristate "Drivers for Davicom PHYs"

	---help---

	  Currently supports dm9161e and dm9131

config MDIO_BUS_MUX

	tristate

	depends on OF_MDIO

	help

	  This module provides a driver framework for MDIO bus

	  multiplexers which connect one of several child MDIO busses

	  to a parent bus.  Switching between child busses is done by

	  device specific drivers.



config QSEMI_PHY

	tristate "Drivers for Quality Semiconductor PHYs"

	---help---

	  Currently supports the qs6612

config MDIO_BUS_MUX_BCM_IPROC

	tristate "Support for iProc based MDIO bus multiplexers"

	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)

	select MDIO_BUS_MUX

	default ARCH_BCM_IPROC

	help

	  This module provides a driver for MDIO bus multiplexers found in

	  iProc based Broadcom SoCs. This multiplexer connects one of several

	  child MDIO bus to a parent bus. Buses could be internal as well as

	  external and selection logic lies inside the same multiplexer.



config LXT_PHY

	tristate "Drivers for the Intel LXT PHYs"

	---help---

	  Currently supports the lxt970, lxt971

config MDIO_BUS_MUX_GPIO

	tristate "Support for GPIO controlled MDIO bus multiplexers"

	depends on OF_GPIO && OF_MDIO

	select MDIO_BUS_MUX

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via GPIO lines.  The multiplexer connects one of

	  several child MDIO busses to a parent bus.  Child bus

	  selection is under the control of GPIO lines.



config CICADA_PHY

	tristate "Drivers for the Cicada PHYs"

	---help---

	  Currently supports the cis8204

config MDIO_BUS_MUX_MMIOREG

	tristate "Support for MMIO device-controlled MDIO bus multiplexers"

	depends on OF_MDIO && HAS_IOMEM

	select MDIO_BUS_MUX

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via a simple memory-mapped device, like an FPGA.

	  The multiplexer connects one of several child MDIO busses to a

	  parent bus.  Child bus selection is under the control of one of

	  the FPGA's registers.



config VITESSE_PHY

        tristate "Drivers for the Vitesse PHYs"

        ---help---

          Currently supports the vsc8244

	  Currently, only 8-bit registers are supported.



config TERANETICS_PHY

        tristate "Drivers for the Teranetics PHYs"

        ---help---

          Currently supports the Teranetics TN2020

config MDIO_CAVIUM

	tristate



config SMSC_PHY

	tristate "Drivers for SMSC PHYs"

config MDIO_GPIO

	tristate "Support for GPIO lib-based bitbanged MDIO buses"

	depends on MDIO_BITBANG && GPIOLIB

	---help---

	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs

	  Supports GPIO lib-based MDIO busses.



config BCM_NET_PHYLIB

	tristate

	  To compile this driver as a module, choose M here: the module

	  will be called mdio-gpio.



config BROADCOM_PHY

	tristate "Drivers for Broadcom PHYs"

	select BCM_NET_PHYLIB

config MDIO_HISI_FEMAC

	tristate "Hisilicon FEMAC MDIO bus controller"

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Hisilicon SoC that have an Fast Ethernet MAC.



config MDIO_MOXART

        tristate "MOXA ART MDIO interface support"

        depends on ARCH_MOXART

        help

          This driver supports the MDIO interface found in the network

          interface units of the MOXA ART SoC



config MDIO_OCTEON

	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"

	depends on 64BIT

	depends on HAS_IOMEM

	select MDIO_CAVIUM

	help

	  This module provides a driver for the Octeon and ThunderX MDIO

	  buses. It is required by the Octeon and ThunderX ethernet device

	  drivers on some systems.



config MDIO_SUN4I

	tristate "Allwinner sun4i MDIO interface support"

	depends on ARCH_SUNXI

	help

	  This driver supports the MDIO interface found in the network

	  interface units of the Allwinner SoC that have an EMAC (A10,

	  A12, A10s, etc.)



config MDIO_THUNDER

	tristate "Support for MDIO buses on ThunderX SOCs"

	depends on 64BIT

	depends on PCI

	select MDIO_CAVIUM

	help

	  This driver supports the MDIO interfaces found on Cavium

	  ThunderX SoCs when the MDIO bus device appears as a PCI

	  device.



config MDIO_XGENE

	tristate "APM X-Gene SoC MDIO bus controller"

	help

	  This module provides a driver for the MDIO busses found in the

	  APM X-Gene SoC's.



comment "MII PHY device drivers"



config AMD_PHY

	tristate "Drivers for the AMD PHYs"

	---help---

	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,

	  BCM5481 and BCM5482 PHYs.

	  Currently supports the am79c874



config BCM_CYGNUS_PHY

	tristate "Drivers for Broadcom Cygnus SoC internal PHY"

	depends on ARCH_BCM_CYGNUS || COMPILE_TEST

	depends on MDIO_BCM_IPROC

	select BCM_NET_PHYLIB

config AQUANTIA_PHY

        tristate "Drivers for the Aquantia PHYs"

        ---help---

	  This PHY driver is for the 1G internal PHYs of the Broadcom

	  Cygnus Family SoC.

          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405



	  Currently supports internal PHY's used in the BCM11300,

	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,

	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.

config AT803X_PHY

	tristate "Drivers for Atheros AT803X PHYs"

	---help---

	  Currently supports the AT8030 and AT8035 model



config BCM63XX_PHY

	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
@@ -114,35 +182,38 @@ config BCM87XX_PHY 
	help

	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.



config ICPLUS_PHY

	tristate "Drivers for ICPlus PHYs"

config BCM_CYGNUS_PHY

	tristate "Drivers for Broadcom Cygnus SoC internal PHY"

	depends on ARCH_BCM_CYGNUS || COMPILE_TEST

	depends on MDIO_BCM_IPROC

	select BCM_NET_PHYLIB

	---help---

	  Currently supports the IP175C and IP1001 PHYs.

	  This PHY driver is for the 1G internal PHYs of the Broadcom

	  Cygnus Family SoC.



config REALTEK_PHY

	tristate "Drivers for Realtek PHYs"

	---help---

	  Supports the Realtek 821x PHY.

	  Currently supports internal PHY's used in the BCM11300,

	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,

	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.



config NATIONAL_PHY

	tristate "Drivers for National Semiconductor PHYs"

	---help---

	  Currently supports the DP83865 PHY.

config BCM_NET_PHYLIB

	tristate



config STE10XP

	tristate "Driver for STMicroelectronics STe10Xp PHYs"

config BROADCOM_PHY

	tristate "Drivers for Broadcom PHYs"

	select BCM_NET_PHYLIB

	---help---

	  This is the driver for the STe100p and STe101p PHYs.

	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,

	  BCM5481 and BCM5482 PHYs.



config LSI_ET1011C_PHY

	tristate "Driver for LSI ET1011C PHY"

config CICADA_PHY

	tristate "Drivers for the Cicada PHYs"

	---help---

	  Supports the LSI ET1011C PHY.

	  Currently supports the cis8204



config MICREL_PHY

	tristate "Driver for Micrel PHYs"

config DAVICOM_PHY

	tristate "Drivers for Davicom PHYs"

	---help---

	  Supports the KSZ9021, VSC8201, KS8001 PHYs.

	  Currently supports dm9161e and dm9131



config DP83848_PHY

	tristate "Driver for Texas Instruments DP83848 PHY"
@@ -154,11 +225,6 @@ config DP83867_PHY 
	---help---

	  Currently supports the DP83867 PHY.



config MICROCHIP_PHY

	tristate "Drivers for Microchip PHYs"

	help

	  Supports the LAN88XX PHYs.



config FIXED_PHY

	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"

	depends on PHYLIB
@@ -169,148 +235,83 @@ config FIXED_PHY 


	  Currently tested with mpc866ads and mpc8349e-mitx.



config MDIO_BITBANG

	tristate "Support for bitbanged MDIO buses"

	help

	  This module implements the MDIO bus protocol in software,

	  for use by low level drivers that export the ability to

	  drive the relevant pins.



	  If in doubt, say N.



config MDIO_GPIO

	tristate "Support for GPIO lib-based bitbanged MDIO buses"

	depends on MDIO_BITBANG && GPIOLIB

config ICPLUS_PHY

	tristate "Drivers for ICPlus PHYs"

	---help---

	  Supports GPIO lib-based MDIO busses.



	  To compile this driver as a module, choose M here: the module

	  will be called mdio-gpio.



config MDIO_CAVIUM

	tristate



config MDIO_OCTEON

	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"

	depends on 64BIT

	depends on HAS_IOMEM

	select MDIO_CAVIUM

	help

	  This module provides a driver for the Octeon and ThunderX MDIO

	  buses. It is required by the Octeon and ThunderX ethernet device

	  drivers on some systems.



config MDIO_THUNDER

	tristate "Support for MDIO buses on ThunderX SOCs"

	depends on 64BIT

	depends on PCI

	select MDIO_CAVIUM

	help

	  This driver supports the MDIO interfaces found on Cavium

	  ThunderX SoCs when the MDIO bus device appears as a PCI

	  device.

	  Currently supports the IP175C and IP1001 PHYs.



config INTEL_XWAY_PHY

	tristate "Driver for Intel XWAY PHYs"

	---help---

	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.

	  These PHYs are marked as standalone chips under the names

	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel

	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.



config MDIO_SUN4I

	tristate "Allwinner sun4i MDIO interface support"

	depends on ARCH_SUNXI

	help

	  This driver supports the MDIO interface found in the network

	  interface units of the Allwinner SoC that have an EMAC (A10,

	  A12, A10s, etc.)

config LSI_ET1011C_PHY

	tristate "Driver for LSI ET1011C PHY"

	---help---

	  Supports the LSI ET1011C PHY.



config MDIO_MOXART

        tristate "MOXA ART MDIO interface support"

        depends on ARCH_MOXART

        help

          This driver supports the MDIO interface found in the network

          interface units of the MOXA ART SoC

config LXT_PHY

	tristate "Drivers for the Intel LXT PHYs"

	---help---

	  Currently supports the lxt970, lxt971



config MDIO_BUS_MUX

	tristate

	depends on OF_MDIO

	help

	  This module provides a driver framework for MDIO bus

	  multiplexers which connect one of several child MDIO busses

	  to a parent bus.  Switching between child busses is done by

	  device specific drivers.

config MARVELL_PHY

	tristate "Drivers for Marvell PHYs"

	---help---

	  Currently has a driver for the 88E1011S



config MDIO_BUS_MUX_GPIO

	tristate "Support for GPIO controlled MDIO bus multiplexers"

	depends on OF_GPIO && OF_MDIO

	select MDIO_BUS_MUX

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via GPIO lines.  The multiplexer connects one of

	  several child MDIO busses to a parent bus.  Child bus

	  selection is under the control of GPIO lines.

config MICREL_PHY

	tristate "Driver for Micrel PHYs"

	---help---

	  Supports the KSZ9021, VSC8201, KS8001 PHYs.



config MDIO_BUS_MUX_MMIOREG

	tristate "Support for MMIO device-controlled MDIO bus multiplexers"

	depends on OF_MDIO && HAS_IOMEM

	select MDIO_BUS_MUX

config MICROCHIP_PHY

	tristate "Drivers for Microchip PHYs"

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via a simple memory-mapped device, like an FPGA.

	  The multiplexer connects one of several child MDIO busses to a

	  parent bus.  Child bus selection is under the control of one of

	  the FPGA's registers.

	  Supports the LAN88XX PHYs.



	  Currently, only 8-bit registers are supported.

config MICROSEMI_PHY

    tristate "Drivers for the Microsemi PHYs"

    ---help---

      Currently supports the VSC8531 and VSC8541 PHYs



config MDIO_BUS_MUX_BCM_IPROC

	tristate "Support for iProc based MDIO bus multiplexers"

	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)

	select MDIO_BUS_MUX

	default ARCH_BCM_IPROC

	help

	  This module provides a driver for MDIO bus multiplexers found in

	  iProc based Broadcom SoCs. This multiplexer connects one of several

	  child MDIO bus to a parent bus. Buses could be internal as well as

	  external and selection logic lies inside the same multiplexer.

config NATIONAL_PHY

	tristate "Drivers for National Semiconductor PHYs"

	---help---

	  Currently supports the DP83865 PHY.



config MDIO_BCM_UNIMAC

	tristate "Broadcom UniMAC MDIO bus controller"

	depends on HAS_IOMEM

	help

	  This module provides a driver for the Broadcom UniMAC MDIO busses.

	  This hardware can be found in the Broadcom GENET Ethernet MAC

	  controllers as well as some Broadcom Ethernet switches such as the

	  Starfighter 2 switches.

config QSEMI_PHY

	tristate "Drivers for Quality Semiconductor PHYs"

	---help---

	  Currently supports the qs6612



config MDIO_BCM_IPROC

	tristate "Broadcom iProc MDIO bus controller"

	depends on ARCH_BCM_IPROC || COMPILE_TEST

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Broadcom iProc SoC's.

config REALTEK_PHY

	tristate "Drivers for Realtek PHYs"

	---help---

	  Supports the Realtek 821x PHY.



config INTEL_XWAY_PHY

	tristate "Driver for Intel XWAY PHYs"

config SMSC_PHY

	tristate "Drivers for SMSC PHYs"

	---help---

	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.

	  These PHYs are marked as standalone chips under the names

	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel

	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.

	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs



config MDIO_HISI_FEMAC

	tristate "Hisilicon FEMAC MDIO bus controller"

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Hisilicon SoC that have an Fast Ethernet MAC.

config STE10XP

	tristate "Driver for STMicroelectronics STe10Xp PHYs"

	---help---

	  This is the driver for the STe100p and STe101p PHYs.



config MDIO_XGENE

	tristate "APM X-Gene SoC MDIO bus controller"

	help

	  This module provides a driver for the MDIO busses found in the

	  APM X-Gene SoC's.

config TERANETICS_PHY

        tristate "Drivers for the Teranetics PHYs"

        ---help---

          Currently supports the Teranetics TN2020



config MICROSEMI_PHY

    tristate "Drivers for the Microsemi PHYs"

config VITESSE_PHY

        tristate "Drivers for the Vitesse PHYs"

        ---help---

      Currently supports the VSC8531 and VSC8541 PHYs

          Currently supports the vsc8244



config XILINX_GMII2RGMII

       tristate "Xilinx GMII2RGMII converter driver"

drivers/net/phy/Makefile

+39 −37
Original line number Diff line number Diff line 
# Makefile for Linux PHY drivers

# Makefile for Linux PHY drivers and MDIO bus drivers



libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o

libphy-$(CONFIG_SWPHY)		+= swphy.o



obj-$(CONFIG_PHYLIB)		+= libphy.o



obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o

obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o

obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o

obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o

obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o

obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o

obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o

obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o

obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o

obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o

obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o

obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o



obj-$(CONFIG_AMD_PHY)		+= amd.o

obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o

obj-$(CONFIG_MARVELL_PHY)	+= marvell.o

obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o

obj-$(CONFIG_CICADA_PHY)	+= cicada.o

obj-$(CONFIG_LXT_PHY)		+= lxt.o

obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o

obj-$(CONFIG_SMSC_PHY)		+= smsc.o

obj-$(CONFIG_MICROSEMI_PHY) += mscc.o

obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o

obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o

obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o

obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o

obj-$(CONFIG_AT803X_PHY)	+= at803x.o

obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o

obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o

obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o

obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o

obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o

obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o

obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

obj-$(CONFIG_NATIONAL_PHY)	+= national.o

obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o

obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o

obj-$(CONFIG_CICADA_PHY)	+= cicada.o

obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o

obj-$(CONFIG_DP83640_PHY)	+= dp83640.o

obj-$(CONFIG_DP83848_PHY)	+= dp83848.o

obj-$(CONFIG_DP83867_PHY)	+= dp83867.o

obj-$(CONFIG_STE10XP)		+= ste10Xp.o

obj-$(CONFIG_MICREL_PHY)	+= micrel.o

obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o

obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o

obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o

obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o

obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o

obj-$(CONFIG_LXT_PHY)		+= lxt.o

obj-$(CONFIG_MARVELL_PHY)	+= marvell.o

obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o

obj-$(CONFIG_AT803X_PHY)	+= at803x.o

obj-$(CONFIG_AMD_PHY)		+= amd.o

obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o

obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o

obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o

obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o

obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o

obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o

obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o

obj-$(CONFIG_MICREL_PHY)	+= micrel.o

obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o

obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o

obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o

obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o

obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o

obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o

obj-$(CONFIG_NATIONAL_PHY)	+= national.o

obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o

obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

obj-$(CONFIG_SMSC_PHY)		+= smsc.o

obj-$(CONFIG_STE10XP)		+= ste10Xp.o

obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o

obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o

obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o

CRA Git | Maintained and supported by SUSTech CRA and CCSE