Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM...

ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver

The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho

controller can support upto 16 Fan tachometer inputs.

There can be upto 8 fans supported. Each fan can have one PWM output and

one/two Fan tach inputs.

Required properties for pwm-tacho node:

- #address-cells : should be 1.

- #size-cells : should be 1.

- reg : address and length of the register set for the device.

- pinctrl-names : a pinctrl state named "default" must be defined.

- pinctrl-0 : phandle referencing pin configuration of the PWM ports.

- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and

	       "aspeed,ast2500-pwm-tacho" for AST2500.

- clocks : a fixed clock providing input clock frequency(PWM

	   and Fan Tach clock)

fan subnode format:

===================

Under fan subnode there can upto 8 child nodes, with each child node

representing a fan. If there are 8 fans each fan can have one PWM port and

one/two Fan tach inputs.

Required properties for each child node:

- reg : should specify PWM source port.

	integer value in the range 0 to 7 with 0 indicating PWM port A and

	7 indicating PWM port H.

- aspeed,fan-tach-ch : should specify the Fan tach input channel.

                integer value in the range 0 through 15, with 0 indicating

		Fan tach channel 0 and 15 indicating Fan tach channel 15.

		Atleast one Fan tach input channel is required.

Examples:

pwm_tacho_fixed_clk: fixedclk {

	compatible = "fixed-clock";

	#clock-cells = <0>;

	clock-frequency = <24000000>;

};

pwm_tacho: pwmtachocontroller@1e786000 {

	#address-cells = <1>;

	#size-cells = <1>;

	reg = <0x1E786000 0x1000>;

	compatible = "aspeed,ast2500-pwm-tacho";

	clocks = <&pwm_tacho_fixed_clk>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;

	fan@0 {

		reg = <0x00>;

		aspeed,fan-tach-ch = /bits/ 8 <0x00>;

	};

	fan@1 {

		reg = <0x01>;

		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>;

	};

};