Commit d56fe359 authored by Grygorii Strashko's avatar Grygorii Strashko Committed by Tony Lindgren
Browse files

ARM: dts: am57xx-idk: switch to new cpsw switch drv 



Switch all am571/2/4-idk boards to use new cpsw switch driver.
Those boards have 2 Ext. port wired and configured in dual_mac mode by
default. Hence, dual_mac mode has been preserved the same way between
legacy and new driver it's safe to switch drivers.

Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 67e97cc6

arch/arm/boot/dts/am571x-idk.dts

+0 −27
Original line number Diff line number Diff line
@@ -208,30 +208,3 @@ 
	pinctrl-1 = <&mmc2_pins_hs>;

	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;

};
 


&mac_sw {

	pinctrl-names = "default", "sleep";

	status = "okay";

};



&cpsw_port1 {

	phy-handle = <&ethphy0_sw>;

	phy-mode = "rgmii-rxid";

	ti,dual-emac-pvid = <1>;

};



&cpsw_port2 {

	phy-handle = <&ethphy1_sw>;

	phy-mode = "rgmii-rxid";

	ti,dual-emac-pvid = <2>;

};



&davinci_mdio_sw {

	ethphy0_sw: ethernet-phy@0 {

		reg = <0>;

	};



	ethphy1_sw: ethernet-phy@1 {

		reg = <1>;

	};

};

arch/arm/boot/dts/am572x-idk.dts

+0 −5
Original line number Diff line number Diff line
@@ -27,8 +27,3 @@ 
	pinctrl-1 = <&mmc2_pins_hs>;

	pinctrl-2 = <&mmc2_pins_ddr_rev20>;

};
 


&mac {

	status = "okay";

	dual_emac;

};

arch/arm/boot/dts/am574x-idk.dts

+0 −5
Original line number Diff line number Diff line
@@ -36,11 +36,6 @@ 
	pinctrl-2 = <&mmc2_pins_default>;

};



&mac {

	status = "okay";

	dual_emac;

};



&m_can0 {

	status = "disabled";

};

arch/arm/boot/dts/am57xx-idk-common.dtsi

+9 −5
Original line number Diff line number Diff line
@@ -448,19 +448,23 @@ 
	ext-clk-src;

};



&cpsw_emac0 {

&mac_sw {

	status = "okay";

};



&cpsw_port1 {

	phy-handle = <&ethphy0>;

	phy-mode = "rgmii-rxid";

	dual_emac_res_vlan = <1>;

	ti,dual-emac-pvid = <1>;

};



&cpsw_emac1 {

&cpsw_port2 {

	phy-handle = <&ethphy1>;

	phy-mode = "rgmii-rxid";

	dual_emac_res_vlan = <2>;

	ti,dual-emac-pvid = <2>;

};



&davinci_mdio {

&davinci_mdio_sw {

	ethphy0: ethernet-phy@0 {

		reg = <0>;

	};

CRA Git | Maintained and supported by SUSTech CRA and CCSE