+3
−0
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
Doing writeback on lots of little files causes terrible IOPS storms because of the per-mapping writeback plugging we do. This essentially causes imeediate dispatch of IO for each mapping, regardless of the context in which writeback is occurring. IOWs, running a concurrent write-lots-of-small 4k files using fsmark on XFS results in a huge number of IOPS being issued for data writes. Metadata writes are sorted and plugged at a high level by XFS, so aggregate nicely into large IOs. However, data writeback IOs are dispatched in individual 4k IOs, even when the blocks of two consecutively written files are adjacent. Test VM: 8p, 8GB RAM, 4xSSD in RAID0, 100TB sparse XFS filesystem, metadata CRCs enabled. Kernel: 3.10-rc5 + xfsdev + my 3.11 xfs queue (~70 patches) Test: $ ./fs_mark -D 10000 -S0 -n 10000 -s 4096 -L 120 -d /mnt/scratch/0 -d /mnt/scratch/1 -d /mnt/scratch/2 -d /mnt/scratch/3 -d /mnt/scratch/4 -d /mnt/scratch/5 -d /mnt/scratch/6 -d /mnt/scratch/7 Result: wall sys create rate Physical write IO time CPU (avg files/s) IOPS Bandwidth ----- ----- ------------ ------ --------- unpatched 6m56s 15m47s 24,000+/-500 26,000 130MB/s patched 5m06s 13m28s 32,800+/-600 1,500 180MB/s improvement -26.44% -14.68% +36.67% -94.23% +38.46% If I use zero length files, this workload at about 500 IOPS, so plugging drops the data IOs from roughly 25,500/s to 1000/s. 3 lines of code, 35% better throughput for 15% less CPU. The benefits of plugging at this layer are likely to be higher for spinning media as the IO patterns for this workload are going make a much bigger difference on high IO latency devices..... Signed-off-by:Dave Chinner <dchinner@redhat.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Jan Kara <jack@suse.cz> Tested-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
CRA Git | Maintained and supported by SUSTech CRA and CCSE