Commit d23f028a authored by Steve Glendinning's avatar Steve Glendinning Committed by David S. Miller
Browse files

smsc911x: add external phy detection overrides 



On LAN9115/LAN9117/LAN9215/LAN9217, external phys are supported.  These
are usually indicated by a hardware strap which sets an "external PHY
detected" bit in the HW_CFG register.

In some cases it is desirable to override this hardware strap and force
use of either the internal phy or an external PHY.  This patch adds
SMSC911X_FORCE_INTERNAL_PHY and SMSC911X_FORCE_EXTERNAL_PHY flags so a
platform can indicate this preference via its platform_data.

Signed-off-by: default avatarSteve Glendinning <steve.glendinning@smsc.com>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Tested-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e81259b4

drivers/net/smsc911x.c

+38 −37
Original line number Diff line number Diff line
@@ -368,20 +368,11 @@ out: 
	return reg;

}



/* Autodetects and initialises external phy for SMSC9115 and SMSC9117 flavors.

 * If something goes wrong, returns -ENODEV to revert back to internal phy.

 * Performed at initialisation only, so interrupts are enabled */

static int smsc911x_phy_initialise_external(struct smsc911x_data *pdata)

/* Switch to external phy. Assumes tx and rx are stopped. */

static void smsc911x_phy_enable_external(struct smsc911x_data *pdata)

{

	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);



	/* External phy is requested, supported, and detected */

	if (hwcfg & HW_CFG_EXT_PHY_DET_) {



		/* Switch to external phy. Assuming tx and rx are stopped

		 * because smsc911x_phy_initialise is called before

		 * smsc911x_rx_initialise and tx_initialise. */



	/* Disable phy clocks to the MAC */

	hwcfg &= (~HW_CFG_PHY_CLK_SEL_);

	hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
@@ -400,16 +391,30 @@ static int smsc911x_phy_initialise_external(struct smsc911x_data *pdata) 


	hwcfg |= HW_CFG_SMI_SEL_;

	smsc911x_reg_write(pdata, HW_CFG, hwcfg);

}



/* Autodetects and enables external phy if present on supported chips.

 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY

 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */

static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata)

{

	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG);



		SMSC_TRACE(HW, "Successfully switched to external PHY");

	if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) {

		SMSC_TRACE(HW, "Forcing internal PHY");

		pdata->using_extphy = 0;

	} else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) {

		SMSC_TRACE(HW, "Forcing external PHY");

		smsc911x_phy_enable_external(pdata);

		pdata->using_extphy = 1;

	} else if (hwcfg & HW_CFG_EXT_PHY_DET_) {

		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY");

		smsc911x_phy_enable_external(pdata);

		pdata->using_extphy = 1;

	} else {

		SMSC_WARNING(HW, "No external PHY detected, "

			"Using internal PHY instead.");

		/* Use internal phy */

		return -ENODEV;

		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY");

		pdata->using_extphy = 0;

	}

	return 0;

}



/* Fetches a tx status out of the status fifo */
@@ -825,22 +830,18 @@ static int __devinit smsc911x_mii_init(struct platform_device *pdev, 


	pdata->mii_bus->parent = &pdev->dev;



	pdata->using_extphy = 0;



	switch (pdata->idrev & 0xFFFF0000) {

	case 0x01170000:

	case 0x01150000:

	case 0x117A0000:

	case 0x115A0000:

		/* External PHY supported, try to autodetect */

		if (smsc911x_phy_initialise_external(pdata) < 0) {

			SMSC_TRACE(HW, "No external PHY detected, "

				"using internal PHY");

		}

		smsc911x_phy_initialise_external(pdata);

		break;

	default:

		SMSC_TRACE(HW, "External PHY is not supported, "

			"using internal PHY");

		pdata->using_extphy = 0;

		break;

	}

include/linux/smsc911x.h

+2 −0
Original line number Diff line number Diff line
@@ -43,5 +43,7 @@ struct smsc911x_platform_config { 
/* Constants for flags */

#define SMSC911X_USE_16BIT 			(BIT(0))

#define SMSC911X_USE_32BIT 			(BIT(1))

#define SMSC911X_FORCE_INTERNAL_PHY		(BIT(2))

#define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))



#endif /* __LINUX_SMSC911X_H__ */

CRA Git | Maintained and supported by SUSTech CRA and CCSE