powerpc/4xx: Add suspend and idle support (d164f6d4) · Commits · 戴 / test

Documentation/powerpc/dts-bindings/4xx/cpm.txt

0 → 100644

+52 −0

Original line number	Diff line number	Diff line
		PPC4xx Clock Power Management (CPM) node

		Required properties:
		- compatible : compatible list, currently only "ibm,cpm"
		- dcr-access-method : "native"
		- dcr-reg : < DCR register range >

		Optional properties:
		- er-offset : All 4xx SoCs with a CPM controller have
		one of two different order for the CPM
		registers. Some have the CPM registers
		in the following order (ER,FR,SR). The
		others have them in the following order
		(SR,ER,FR). For the second case set
		er-offset = <1>.
		- unused-units : specifier consist of one cell. For each
		bit in the cell, the corresponding bit
		in CPM will be set to turn off unused
		devices.
		- idle-doze : specifier consist of one cell. For each
		bit in the cell, the corresponding bit
		in CPM will be set to turn off unused
		devices. This is usually just CPM[CPU].
		- standby : specifier consist of one cell. For each
		bit in the cell, the corresponding bit
		in CPM will be set on standby and
		restored on resume.
		- suspend : specifier consist of one cell. For each
		bit in the cell, the corresponding bit
		in CPM will be set on suspend (mem) and
		restored on resume. Note, for standby
		and suspend the corresponding bits can
		be different or the same. Usually for
		standby only class 2 and 3 units are set.
		However, the interface does not care.
		If they are the same, the additional
		power saving will be seeing if support
		is available to put the DDR in self
		refresh mode and any additional power
		saving techniques for the specific SoC.

		Example:
		CPM0: cpm {
		compatible = "ibm,cpm";
		dcr-access-method = "native";
		dcr-reg = <0x160 0x003>;
		er-offset = <0>;
		unused-units = <0x00000100>;
		idle-doze = <0x02000000>;
		standby = <0xfeff0000>;
		suspend = <0xfeff791d>;
		};

arch/powerpc/Kconfig

+10 −3

Original line number	Diff line number	Diff line
		@@ -212,7 +212,7 @@ config ARCH_HIBERNATION_POSSIBLE
		config ARCH_SUSPEND_POSSIBLE
		def_bool y
		depends on ADB_PMU \|\| PPC_EFIKA \|\| PPC_LITE5200 \|\| PPC_83xx \|\| \
		PPC_85xx \|\| PPC_86xx \|\| PPC_PSERIES
		PPC_85xx \|\| PPC_86xx \|\| PPC_PSERIES \|\| 44x \|\| 40x

		config PPC_DCR_NATIVE
		bool
		@@ -598,13 +598,11 @@ config EXTRA_TARGETS

		If unsure, leave blank

		if !44x \|\| BROKEN
		config ARCH_WANTS_FREEZER_CONTROL
		def_bool y
		depends on ADB_PMU

		source kernel/power/Kconfig
		endif

		config SECCOMP
		bool "Enable seccomp to safely compute untrusted bytecode"
		@@ -685,6 +683,15 @@ config FSL_PMC
		Freescale MPC85xx/MPC86xx power management controller support
		(suspend/resume). For MPC83xx see platforms/83xx/suspend.c

		config PPC4xx_CPM
		bool
		default y
		depends on SUSPEND && (44x \|\| 40x)
		help
		PPC4xx Clock Power Management (CPM) support (suspend/resume).
		It also enables support for two different idle states (idle-wait
		and idle-doze).

		config 4xx_SOC
		bool

arch/powerpc/platforms/44x/Makefile

+4 −1

Original line number	Diff line number	Diff line
		obj-$(CONFIG_44x) := misc_44x.o idle.o
		obj-$(CONFIG_44x) += misc_44x.o
		ifneq ($(CONFIG_PPC4xx_CPM),y)
		obj-$(CONFIG_44x) += idle.o
		endif
		obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
		obj-$(CONFIG_EBONY) += ebony.o
		obj-$(CONFIG_SAM440EP) += sam440ep.o

arch/powerpc/sysdev/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
		ifeq ($(CONFIG_PCI),y)
		obj-$(CONFIG_4xx) += ppc4xx_pci.o
		endif
		obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o
		obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o

		obj-$(CONFIG_CPM) += cpm_common.o

arch/powerpc/sysdev/ppc4xx_cpm.c

0 → 100644

+346 −0

Original line number	Diff line number	Diff line
		/*
		* PowerPC 4xx Clock and Power Management
		*
		* Copyright (C) 2010, Applied Micro Circuits Corporation
		* Victor Gallardo (vgallardo@apm.com)
		*
		* Based on arch/powerpc/platforms/44x/idle.c:
		* Jerone Young <jyoung5@us.ibm.com>
		* Copyright 2008 IBM Corp.
		*
		* Based on arch/powerpc/sysdev/fsl_pmc.c:
		* Anton Vorontsov <avorontsov@ru.mvista.com>
		* Copyright 2009 MontaVista Software, Inc.
		*
		* See file CREDITS for list of people who contributed to this
		* project.
		*
		* This program is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of
		* the License, or (at your option) any later version.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
		* MA 02111-1307 USA
		*/

		#include <linux/kernel.h>
		#include <linux/of_platform.h>
		#include <linux/sysfs.h>
		#include <linux/cpu.h>
		#include <linux/suspend.h>
		#include <asm/dcr.h>
		#include <asm/dcr-native.h>
		#include <asm/machdep.h>

		#define CPM_ER 0
		#define CPM_FR 1
		#define CPM_SR 2

		#define CPM_IDLE_WAIT 0
		#define CPM_IDLE_DOZE 1

		struct cpm {
		dcr_host_t dcr_host;
		unsigned int dcr_offset[3];
		unsigned int powersave_off;
		unsigned int unused;
		unsigned int idle_doze;
		unsigned int standby;
		unsigned int suspend;
		};

		static struct cpm cpm;

		struct cpm_idle_mode {
		unsigned int enabled;
		const char *name;
		};

		static struct cpm_idle_mode idle_mode[] = {
		[CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
		[CPM_IDLE_DOZE] = { 0, "doze" },
		};

		static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
		{
		unsigned int value;

		/* CPM controller supports 3 different types of sleep interface
		* known as class 1, 2 and 3. For class 1 units, they are
		* unconditionally put to sleep when the corresponding CPM bit is
		* set. For class 2 and 3 units this is not case; if they can be
		* put to to sleep, they will. Here we do not verify, we just
		* set them and expect them to eventually go off when they can.
		*/
		value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
		dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value \| mask);

		/* return old state, to restore later if needed */
		return value;
		}

		static void cpm_idle_wait(void)
		{
		unsigned long msr_save;

		/* save off initial state */
		msr_save = mfmsr();
		/* sync required when CPM0_ER[CPU] is set */
		mb();
		/* set wait state MSR */
		mtmsr(msr_save\|MSR_WE\|MSR_EE\|MSR_CE\|MSR_DE);
		isync();
		/* return to initial state */
		mtmsr(msr_save);
		isync();
		}

		static void cpm_idle_sleep(unsigned int mask)
		{
		unsigned int er_save;

		/* update CPM_ER state */
		er_save = cpm_set(CPM_ER, mask);

		/* go to wait state so that CPM0_ER[CPU] can take effect */
		cpm_idle_wait();

		/* restore CPM_ER state */
		dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
		}

		static void cpm_idle_doze(void)
		{
		cpm_idle_sleep(cpm.idle_doze);
		}

		static void cpm_idle_config(int mode)
		{
		int i;

		if (idle_mode[mode].enabled)
		return;

		for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
		idle_mode[i].enabled = 0;

		idle_mode[mode].enabled = 1;
		}

		static ssize_t cpm_idle_show(struct kobject *kobj,
		struct kobj_attribute attr, char buf)
		{
		char *s = buf;
		int i;

		for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
		if (idle_mode[i].enabled)
		s += sprintf(s, "[%s] ", idle_mode[i].name);
		else
		s += sprintf(s, "%s ", idle_mode[i].name);
		}

		(s-1) = '\n'; / convert the last space to a newline */

		return s - buf;
		}

		static ssize_t cpm_idle_store(struct kobject *kobj,
		struct kobj_attribute *attr,
		const char *buf, size_t n)
		{
		int i;
		char *p;
		int len;

		p = memchr(buf, '\n', n);
		len = p ? p - buf : n;

		for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
		if (strncmp(buf, idle_mode[i].name, len) == 0) {
		cpm_idle_config(i);
		return n;
		}
		}

		return -EINVAL;
		}

		static struct kobj_attribute cpm_idle_attr =
		__ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);

		static void cpm_idle_config_sysfs(void)
		{
		struct sys_device *sys_dev;
		unsigned long ret;

		sys_dev = get_cpu_sysdev(0);

		ret = sysfs_create_file(&sys_dev->kobj,
		&cpm_idle_attr.attr);
		if (ret)
		printk(KERN_WARNING
		"cpm: failed to create idle sysfs entry\n");
		}

		static void cpm_idle(void)
		{
		if (idle_mode[CPM_IDLE_DOZE].enabled)
		cpm_idle_doze();
		else
		cpm_idle_wait();
		}

		static int cpm_suspend_valid(suspend_state_t state)
		{
		switch (state) {
		case PM_SUSPEND_STANDBY:
		return !!cpm.standby;
		case PM_SUSPEND_MEM:
		return !!cpm.suspend;
		default:
		return 0;
		}
		}

		static void cpm_suspend_standby(unsigned int mask)
		{
		unsigned long tcr_save;

		/* disable decrement interrupt */
		tcr_save = mfspr(SPRN_TCR);
		mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);

		/* go to sleep state */
		cpm_idle_sleep(mask);

		/* restore decrement interrupt */
		mtspr(SPRN_TCR, tcr_save);
		}

		static int cpm_suspend_enter(suspend_state_t state)
		{
		switch (state) {
		case PM_SUSPEND_STANDBY:
		cpm_suspend_standby(cpm.standby);
		break;
		case PM_SUSPEND_MEM:
		cpm_suspend_standby(cpm.suspend);
		break;
		}

		return 0;
		}

		static struct platform_suspend_ops cpm_suspend_ops = {
		.valid = cpm_suspend_valid,
		.enter = cpm_suspend_enter,
		};

		static int cpm_get_uint_property(struct device_node *np,
		const char *name)
		{
		int len;
		const unsigned int *prop = of_get_property(np, name, &len);

		if (prop == NULL \|\| len < sizeof(u32))
		return 0;

		return *prop;
		}

		static int __init cpm_init(void)
		{
		struct device_node *np;
		int dcr_base, dcr_len;
		int ret = 0;

		if (!cpm.powersave_off) {
		cpm_idle_config(CPM_IDLE_WAIT);
		ppc_md.power_save = &cpm_idle;
		}

		np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
		if (!np) {
		ret = -EINVAL;
		goto out;
		}

		dcr_base = dcr_resource_start(np, 0);
		dcr_len = dcr_resource_len(np, 0);

		if (dcr_base == 0 \|\| dcr_len == 0) {
		printk(KERN_ERR "cpm: could not parse dcr property for %s\n",
		np->full_name);
		ret = -EINVAL;
		goto out;
		}

		cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);

		if (!DCR_MAP_OK(cpm.dcr_host)) {
		printk(KERN_ERR "cpm: failed to map dcr property for %s\n",
		np->full_name);
		ret = -EINVAL;
		goto out;
		}

		/* All 4xx SoCs with a CPM controller have one of two
		* different order for the CPM registers. Some have the
		* CPM registers in the following order (ER,FR,SR). The
		* others have them in the following order (SR,ER,FR).
		*/

		if (cpm_get_uint_property(np, "er-offset") == 0) {
		cpm.dcr_offset[CPM_ER] = 0;
		cpm.dcr_offset[CPM_FR] = 1;
		cpm.dcr_offset[CPM_SR] = 2;
		} else {
		cpm.dcr_offset[CPM_ER] = 1;
		cpm.dcr_offset[CPM_FR] = 2;
		cpm.dcr_offset[CPM_SR] = 0;
		}

		/* Now let's see what IPs to turn off for the following modes */

		cpm.unused = cpm_get_uint_property(np, "unused-units");
		cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
		cpm.standby = cpm_get_uint_property(np, "standby");
		cpm.suspend = cpm_get_uint_property(np, "suspend");

		/* If some IPs are unused let's turn them off now */

		if (cpm.unused) {
		cpm_set(CPM_ER, cpm.unused);
		cpm_set(CPM_FR, cpm.unused);
		}

		/* Now let's export interfaces */

		if (!cpm.powersave_off && cpm.idle_doze)
		cpm_idle_config_sysfs();

		if (cpm.standby \|\| cpm.suspend)
		suspend_set_ops(&cpm_suspend_ops);
		out:
		if (np)
		of_node_put(np);
		return ret;
		}

		late_initcall(cpm_init);

		static int __init cpm_powersave_off(char *arg)
		{
		cpm.powersave_off = 1;
		return 0;
		}
		__setup("powersave=off", cpm_powersave_off);

Admin message