ath: add common ath_rxbuf_alloc() and make ath9k use it (d15dd3e5) · Commits · 戴 / test

drivers/net/wireless/ath/Kconfig

+1 −3

Original line number	Diff line number	Diff line
		@@ -5,9 +5,7 @@ menuconfig ATH_COMMON
		---help---
		This will enable the support for the Atheros wireless drivers.
		ath5k, ath9k and ar9170 drivers share some common code, this option
		enables the common ath.ko module which currently shares just common
		regulatory EEPROM helpers but will likely be extended later to share
		more between modules.
		enables the common ath.ko module which shares common helpers.

		For more information and documentation on this module you can visit:

drivers/net/wireless/ath/ath.h

0 → 100644

+30 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2008-2009 Atheros Communications Inc.
		*
		* Permission to use, copy, modify, and/or distribute this software for any
		* purpose with or without fee is hereby granted, provided that the above
		* copyright notice and this permission notice appear in all copies.
		*
		* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
		* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
		* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
		* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
		* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
		* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
		* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
		*/

		#ifndef ATH_H
		#define ATH_H

		#include <linux/skbuff.h>

		struct ath_common {
		u16 cachelsz;
		};

		struct sk_buff ath_rxbuf_alloc(struct ath_common common,
		u32 len,
		gfp_t gfp_mask);

		#endif /* ATH_H */

drivers/net/wireless/ath/ath9k/ath9k.h

+3 −1

Original line number	Diff line number	Diff line
		@@ -25,6 +25,7 @@
		#include "hw.h"
		#include "rc.h"
		#include "debug.h"
		#include "../ath.h"

		struct ath_node;

		@@ -532,6 +533,8 @@ struct ath_softc {
		struct ieee80211_hw *hw;
		struct device *dev;

		struct ath_common common;

		spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
		struct ath_wiphy *pri_wiphy;
		struct ath_wiphy *sec_wiphy; / secondary wiphys (virtual radios); may
		@@ -564,7 +567,6 @@ struct ath_softc {
		u32 sc_flags; /* SC_OP_* */
		u16 curtxpow;
		u16 curaid;
		u16 cachelsz;
		u8 nbcnvifs;
		u16 nvifs;
		u8 tx_chainmask;

drivers/net/wireless/ath/ath9k/main.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -1327,7 +1327,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc)
		*/
		ath_read_cachesize(sc, &csz);
		/* XXX assert csz is non-zero */
		sc->cachelsz = csz << 2; /* convert to bytes */
		sc->common.cachelsz = csz << 2; /* convert to bytes */

		ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
		if (!ah) {

drivers/net/wireless/ath/ath9k/recv.c

+4 −36

Original line number	Diff line number	Diff line
		@@ -100,38 +100,6 @@ static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
		return (tsf & ~0x7fff) \| rstamp;
		}

		static struct sk_buff ath_rxbuf_alloc(struct ath_softc sc, u32 len, gfp_t gfp_mask)
		{
		struct sk_buff *skb;
		u32 off;

		/*
		* Cache-line-align. This is important (for the
		* 5210 at least) as not doing so causes bogus data
		* in rx'd frames.
		*/

		/* Note: the kernel can allocate a value greater than
		* what we ask it to give us. We really only need 4 KB as that
		* is this hardware supports and in fact we need at least 3849
		* as that is the MAX AMSDU size this hardware supports.
		* Unfortunately this means we may get 8 KB here from the
		* kernel... and that is actually what is observed on some
		* systems :( */
		skb = __dev_alloc_skb(len + sc->cachelsz - 1, gfp_mask);
		if (skb != NULL) {
		off = ((unsigned long) skb->data) % sc->cachelsz;
		if (off != 0)
		skb_reserve(skb, sc->cachelsz - off);
		} else {
		DPRINTF(sc, ATH_DBG_FATAL,
		"skbuff alloc of size %u failed\n", len);
		return NULL;
		}

		return skb;
		}

		/*
		* For Decrypt or Demic errors, we only mark packet status here and always push
		* up the frame up to let mac80211 handle the actual error case, be it no
		@@ -336,10 +304,10 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
		spin_lock_init(&sc->rx.rxbuflock);

		sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
		min(sc->cachelsz, (u16)64));
		min(sc->common.cachelsz, (u16)64));

		DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
		sc->cachelsz, sc->rx.bufsize);
		sc->common.cachelsz, sc->rx.bufsize);

		/* Initialize rx descriptors */

		@@ -352,7 +320,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
		}

		list_for_each_entry(bf, &sc->rx.rxbuf, list) {
		skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
		skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_KERNEL);
		if (skb == NULL) {
		error = -ENOMEM;
		goto err;
		@@ -777,7 +745,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)

		/* Ensure we always have an skb to requeue once we are done
		* processing the current buffer's skb */
		requeue_skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_ATOMIC);
		requeue_skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_ATOMIC);

		/* If there is no memory we ignore the current RX'd frame,
		* tell hardware it can give us a new frame using the old

Admin message