Commit d033a308 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files

Merge remote-tracking branch 'linus/master' into staging/for_v3.8 

* linus/master: (1428 commits)
  futex: avoid wake_futex() for a PI futex_q
  watchdog: using u64 in get_sample_period()
  writeback: put unused inodes to LRU after writeback completion
  mm: vmscan: check for fatal signals iff the process was throttled
  Revert "mm: remove __GFP_NO_KSWAPD"
  proc: check vma->vm_file before dereferencing
  UAPI: strip the _UAPI prefix from header guards during header installation
  include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges
  jbd: Fix lock ordering bug in journal_unmap_buffer()
  ...
parents c6c22955 e23739b4

.gitignore

+0 −6
Original line number Diff line number Diff line
@@ -14,10 +14,6 @@ 
*.o.*

*.a

*.s

*.ko.unsigned

*.ko.stripped

*.ko.stripped.dig

*.ko.stripped.sig

*.ko

*.so

*.so.dbg
@@ -95,6 +91,4 @@ GTAGS 
extra_certificates

signing_key.priv

signing_key.x509

signing_key.x509.keyid

signing_key.x509.signer

x509.genkey

CREDITS

+5 −0
Original line number Diff line number Diff line
@@ -1823,6 +1823,11 @@ S: Kattreinstr 38 
S: D-64295

S: Germany



N: Avi Kivity

E: avi.kivity@gmail.com

D: Kernel-based Virtual Machine (KVM)

S: Ra'annana, Israel



N: Andi Kleen

E: andi@firstfloor.org

U: http://www.halobates.de

Documentation/00-INDEX

+2 −2
Original line number Diff line number Diff line
@@ -210,6 +210,8 @@ local_ops.txt 
	- semantics and behavior of local atomic operations.

lockdep-design.txt

	- documentation on the runtime locking correctness validator.

lockup-watchdogs.txt

	- info on soft and hard lockup detectors (aka nmi_watchdog).

logo.gif

	- full colour GIF image of Linux logo (penguin - Tux).

logo.txt
@@ -240,8 +242,6 @@ netlabel/ 
	- directory with information on the NetLabel subsystem.

networking/

	- directory with info on various aspects of networking with Linux.

nmi_watchdog.txt

	- info on NMI watchdog for SMP systems.

nommu-mmap.txt

	- documentation about no-mmu memory mapping support.

numastat.txt

Documentation/DocBook/networking.tmpl

+2 −2
Original line number Diff line number Diff line
@@ -56,7 +56,7 @@ 
!Enet/core/filter.c

     </sect1>

     <sect1><title>Generic Network Statistics</title>

!Iinclude/linux/gen_stats.h

!Iinclude/uapi/linux/gen_stats.h

!Enet/core/gen_stats.c

!Enet/core/gen_estimator.c

     </sect1>
@@ -80,7 +80,7 @@ 
!Enet/wimax/op-rfkill.c

!Enet/wimax/stack.c

!Iinclude/net/wimax.h

!Iinclude/linux/wimax.h

!Iinclude/uapi/linux/wimax.h

     </sect1>

  </chapter>

Documentation/IPMI.txt

+3 −62
Original line number Diff line number Diff line
@@ -42,13 +42,7 @@ The driver interface depends on your hardware. If your system 
properly provides the SMBIOS info for IPMI, the driver will detect it

and just work.  If you have a board with a standard interface (These

will generally be either "KCS", "SMIC", or "BT", consult your hardware

manual), choose the 'IPMI SI handler' option.  A driver also exists

for direct I2C access to the IPMI management controller.  Some boards

support this, but it is unknown if it will work on every board.  For

this, choose 'IPMI SMBus handler', but be ready to try to do some

figuring to see if it will work on your system if the SMBIOS/APCI

information is wrong or not present.  It is fairly safe to have both

these enabled and let the drivers auto-detect what is present.

manual), choose the 'IPMI SI handler' option.



You should generally enable ACPI on your system, as systems with IPMI

can have ACPI tables describing them.
@@ -58,8 +52,7 @@ their job correctly, the IPMI controller should be automatically 
detected (via ACPI or SMBIOS tables) and should just work.  Sadly,

many boards do not have this information.  The driver attempts

standard defaults, but they may not work.  If you fall into this

situation, you need to read the section below named 'The SI Driver' or

"The SMBus Driver" on how to hand-configure your system.

situation, you need to read the section below named 'The SI Driver'.



IPMI defines a standard watchdog timer.  You can enable this with the

'IPMI Watchdog Timer' config option.  If you compile the driver into
@@ -104,12 +97,7 @@ driver, each open file for this device ties in to the message handler 
as an IPMI user.



ipmi_si - A driver for various system interfaces.  This supports KCS,

SMIC, and BT interfaces.  Unless you have an SMBus interface or your

own custom interface, you probably need to use this.



ipmi_smb - A driver for accessing BMCs on the SMBus. It uses the

I2C kernel driver's SMBus interfaces to send and receive IPMI messages

over the SMBus.

SMIC, and BT interfaces.



ipmi_watchdog - IPMI requires systems to have a very capable watchdog

timer.  This driver implements the standard Linux watchdog timer
@@ -482,53 +470,6 @@ for specifying an interface. Note that when removing an interface, 
only the first three parameters (si type, address type, and address)

are used for the comparison.  Any options are ignored for removing.



The SMBus Driver

----------------



The SMBus driver allows up to 4 SMBus devices to be configured in the

system.  By default, the driver will register any SMBus interfaces it finds

in the I2C address range of 0x20 to 0x4f on any adapter.  You can change this

at module load time (for a module) with:



  modprobe ipmi_smb.o

	addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]]

	dbg=<flags1>,<flags2>...

	[defaultprobe=1] [dbg_probe=1]



The addresses are specified in pairs, the first is the adapter ID and the

second is the I2C address on that adapter.



The debug flags are bit flags for each BMC found, they are:

IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8



Setting smb_defaultprobe to zero disabled the default probing of SMBus

interfaces at address range 0x20 to 0x4f.  This means that only the

BMCs specified on the smb_addr line will be detected.



Setting smb_dbg_probe to 1 will enable debugging of the probing and

detection process for BMCs on the SMBusses.



Discovering the IPMI compliant BMC on the SMBus can cause devices

on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI

message as a block write to the I2C bus and waits for a response.

This action can be detrimental to some I2C devices. It is highly recommended

that the known I2c address be given to the SMBus driver in the smb_addr

parameter. The default address range will not be used when a smb_addr

parameter is provided.



When compiled into the kernel, the addresses can be specified on the

kernel command line as:



  ipmb_smb.addr=<adapter1>,<i2caddr1>[,<adapter2>,<i2caddr2>[,...]]

	ipmi_smb.dbg=<flags1>,<flags2>...

	ipmi_smb.defaultprobe=0 ipmi_smb.dbg_probe=1



These are the same options as on the module command line.



Note that you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT

is enabled along with this, so the I2C driver knows to run to

completion during sending a panic event.





Other Pieces

------------

CRA Git | Maintained and supported by SUSTech CRA and CCSE