Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码，可以自行至设置中更改；如有其他问题，请发邮件至 service@cra.moe 寻求协助。

Commit cfb0919c authored Nov 18, 2011 by Chad Dupuis Committed by James Bottomley Dec 15, 2011

[SCSI] qla2xxx: Update to dynamic logging.



This patch contains minor fixes to our new logging infrastructure:

- Remove extranous messages.
- Re-add 'nexus' and 'hdl' information.
- Adjusted the message ids to fill up the holes.
- Display FCP_CMND priority on update.
- Log only mail box error conditions.
- Do not print "Firmware ready **** FAILED ****" if cable is unplugged.
- Drop noisy 'fw_state...curr time...' message.
- Correct nexus display during abort.
- Add a special case error-logging set to '1'.
- Catagorize I/O exception display handling.
- Correct the bsg msg code printing.
- Dont use dynamic logging after host is removed.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

parent d8424f68

drivers/scsi/qla2xxx/qla_attr.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -1971,8 +1971,8 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
		"Queue delete failed.\n");
		}

		scsi_host_put(vha->host);
		ql_log(ql_log_info, vha, 0x7088, "VP[%d] deleted.\n", id);
		scsi_host_put(vha->host);
		return 0;
		}

drivers/scsi/qla2xxx/qla_bsg.c

+1 −1

Original line number	Diff line number	Diff line
		@@ -1653,7 +1653,7 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
		}

		ql_dbg(ql_dbg_user, vha, 0x7000,
		"Entered %s msgcode=%d.\n", __func__, bsg_job->request->msgcode);
		"Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);

		switch (bsg_job->request->msgcode) {
		case FC_BSG_RPT_ELS:

drivers/scsi/qla2xxx/qla_dbg.c

+52 −41

Original line number	Diff line number	Diff line
		@@ -11,15 +11,16 @@
		* ----------------------------------------------------------------------
		* \| Level \| Last Value Used \| Holes \|
		* ----------------------------------------------------------------------
		* \| Module Init and Probe \| 0x0116 \| \|
		* \| Module Init and Probe \| 0x0116 \| 0xfa \|
		* \| Mailbox commands \| 0x112b \| \|
		* \| Device Discovery \| 0x2083 \| \|
		* \| Queue Command and IO tracing \| 0x302e \| 0x3008 \|
		* \| Device Discovery \| 0x2084 \| \|
		* \| Queue Command and IO tracing \| 0x302f \| 0x3008 \|
		* \| DPC Thread \| 0x401c \| \|
		* \| Async Events \| 0x5059 \| \|
		* \| Timer Routines \| 0x6010 \| 0x600e,0x600f \|
		* \| User Space Interactions \| 0x709d \| \|
		* \| Task Management \| 0x8041 \| 0x800b \|
		* \| Async Events \| 0x5057 \| 0x5052 \|
		* \| Timer Routines \| 0x6011 \| 0x600e,0x600f \|
		* \| User Space Interactions \| 0x709e \| \|
		* \| Task Management \| 0x803c \| 0x8025-0x8026 \|
		* \| \| \| 0x800b,0x8039 \|
		* \| AER/EEH \| 0x900f \| \|
		* \| Virtual Port \| 0xa007 \| \|
		* \| ISP82XX Specific \| 0xb052 \| \|
		@@ -1650,6 +1651,15 @@ qla81xx_fw_dump_failed:
		/****************************************************************************/
		/* Driver Debug Functions. */
		/****************************************************************************/

		static inline int
		ql_mask_match(uint32_t level)
		{
		if (ql2xextended_error_logging == 1)
		ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
		return (level & ql2xextended_error_logging) == level;
		}

		/*
		* This function is for formatting and logging debug information.
		* It is to be used when vha is available. It formats the message
		@@ -1669,7 +1679,7 @@ ql_dbg(uint32_t level, scsi_qla_host_t vha, int32_t id, const char fmt, ...)
		va_list va;
		struct va_format vaf;

		if ((level & ql2xextended_error_logging) != level)
		if (!ql_mask_match(level))
		return;

		va_start(va, fmt);
		@@ -1715,7 +1725,7 @@ ql_dbg_pci(uint32_t level, struct pci_dev *pdev, int32_t id,

		if (pdev == NULL)
		return;
		if ((level & ql2xextended_error_logging) != level)
		if (!ql_mask_match(level))
		return;

		va_start(va, fmt);
		@@ -1852,7 +1862,8 @@ ql_dump_regs(uint32_t level, scsi_qla_host_t *vha, int32_t id)
		struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
		uint16_t __iomem *mbx_reg;

		if ((level & ql2xextended_error_logging) == level) {
		if (!ql_mask_match(level))
		return;

		if (IS_QLA82XX(ha))
		mbx_reg = &reg82->mailbox_in[0];
		@@ -1866,7 +1877,6 @@ ql_dump_regs(uint32_t level, scsi_qla_host_t *vha, int32_t id)
		ql_dbg(level, vha, id,
		"mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
		}
		}


		void
		@@ -1875,7 +1885,9 @@ ql_dump_buffer(uint32_t level, scsi_qla_host_t *vha, int32_t id,
		{
		uint32_t cnt;
		uint8_t c;
		if ((level & ql2xextended_error_logging) == level) {

		if (!ql_mask_match(level))
		return;

		ql_dbg(level, vha, id, " 0 1 2 3 4 5 6 7 8 "
		"9 Ah Bh Ch Dh Eh Fh\n");
		@@ -1895,4 +1907,3 @@ ql_dump_buffer(uint32_t level, scsi_qla_host_t *vha, int32_t id,
		if (cnt % 16)
		ql_dbg(level, vha, id, "\n");
		}
		}

drivers/scsi/qla2xxx/qla_dbg.h

+1 −0

Original line number	Diff line number	Diff line
		@@ -232,6 +232,7 @@ struct qla2xxx_fw_dump {
		};

		#define QL_MSGHDR "qla2xxx"
		#define QL_DBG_DEFAULT1_MASK 0x1e400000

		#define ql_log_fatal 0 /* display fatal errors */
		#define ql_log_warn 1 /* display critical errors */

drivers/scsi/qla2xxx/qla_def.h

+0 −4

Original line number	Diff line number	Diff line
		@@ -2978,10 +2978,6 @@ typedef struct scsi_qla_host {
		atomic_dec(&__vha->vref_count); \
		} while (0)


		#define qla_printk(level, ha, format, arg...) \
		dev_printk(level , &((ha)->pdev->dev) , format , ## arg)

		/*
		* qla2x00 local function return status codes
		*/

CRA Git | Maintained and supported by SUSTech CRA and CCSE