xhci: Finetune host initiated USB3 rootport link suspend and resume (ceca4938) · Commits · 戴 / test

Depending on the current link state the steps to resume the link to U0 varies. The normal case when a port is suspended (U3) we set the link to U0 and wait for a port event when U3exit completed and port moved to U0. If the port is in U1/U2, then no event is issued, just set link to U0 If port is in Resume or Recovery state then the device has already initiated resume, and this host initiated resume is racing against it. Port event handler for device initiated resume will set link to U0, just wait for the port to reach U0 before returning. Signed-off-by:

Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-9-mathias.nyman@linux.intel.com Signed-off-by:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-hub.c

+25 −11

Original line number	Diff line number	Diff line
		@@ -1309,20 +1309,34 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
		goto error;
		}

		/*
		* set link to U0, steps depend on current link state.
		* U3: set link to U0 and wait for u3exit completion.
		* U1/U2: no PLC complete event, only set link to U0.
		* Resume/Recovery: device initiated U0, only wait for
		* completion
		*/
		if (link_state == USB_SS_PORT_LS_U0) {
		if ((temp & PORT_PLS_MASK) == XDEV_U0)
		break;
		u32 pls = temp & PORT_PLS_MASK;
		bool wait_u0 = false;

		if (!((temp & PORT_PLS_MASK) == XDEV_U1 \|\|
		(temp & PORT_PLS_MASK) == XDEV_U2 \|\|
		(temp & PORT_PLS_MASK) == XDEV_U3)) {
		xhci_warn(xhci, "Can only set port %d to U0 from U state\n",
		wIndex);
		goto error;
		}
		/* already in U0 */
		if (pls == XDEV_U0)
		break;
		if (pls == XDEV_U3 \|\|
		pls == XDEV_RESUME \|\|
		pls == XDEV_RECOVERY) {
		wait_u0 = true;
		reinit_completion(&bus_state->u3exit_done[wIndex]);
		}
		if (pls <= XDEV_U3) /* U1, U2, U3 */
		xhci_set_link_state(xhci, ports[wIndex],
		USB_SS_PORT_LS_U0);
		if (!wait_u0) {
		if (pls > XDEV_U3)
		goto error;
		break;
		}
		spin_unlock_irqrestore(&xhci->lock, flags);
		if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
		msecs_to_jiffies(100)))

Admin message