Commit cdefb95b authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'phy-for-4.10' of... 

Merge tag 'phy-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy

 into usb-next

Kishon writes:

phy: for 4.10

Merge contains:
 *) Add new usb2 phy driver for Meson8b and GXBB
 *) Remove phy drivers added for miphy365 and STiH415/6 (as support for
    these SoCs are removed from the kernel)
 *) Add a sysfs entry to facilitate usb role swap in rcar SoC
 *) Add support for otg port in rk3399
 *) misc fixes in various phy drivers and cleanups

Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parents 0edbf9e5 5e253dfb

Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2

0 → 100644
+15 −0
Original line number Diff line number Diff line 
What:		/sys/devices/platform/<phy-name>/role

Date:		October 2016

KernelVersion:	4.10

Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Description:

		This file can be read and write.

		The file can show/change the phy mode for role swap of usb.



		Write the following strings to change the mode:

		 "host" - switching mode from peripheral to host.

		 "peripheral" - switching mode from host to peripheral.



		Read the file, then it shows the following strings:

		 "host" - The mode is host now.

		 "peripheral" - The mode is peripheral now.

Documentation/devicetree/bindings/phy/meson-usb2-phy.txt→Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt

+3 −3
Original line number Diff line number Diff line 
* Amlogic USB2 PHY

* Amlogic Meson8b and GXBB USB2 PHY



Required properties:

- compatible:	Depending on the platform this should be one of:
@@ -16,10 +16,10 @@ Optional properties: 


Example:



usb0_phy: usb_phy@0 {

usb0_phy: usb-phy@c0000000 {

	compatible = "amlogic,meson-gxbb-usb2-phy";

	#phy-cells = <0>;

	reg = <0x0 0x0 0x0 0x20>;

	reg = <0x0 0xc0000000 0x0 0x20>;

	resets = <&reset RESET_USB_OTG>;

	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;

	clock-names = "usb_general", "usb";

drivers/phy/Kconfig

+15 −18
Original line number Diff line number Diff line
@@ -129,16 +129,6 @@ config PHY_MIPHY28LP 
	  Enable this to support the miphy transceiver (for SATA/PCIE/USB3)

	  that is part of STMicroelectronics STiH407 SoC.



config PHY_MIPHY365X

	tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"

	depends on ARCH_STI

	depends on HAS_IOMEM

	depends on OF

	select GENERIC_PHY

	help

	  Enable this to support the miphy transceiver (for SATA/PCIE)

	  that is part of STMicroelectronics STiH41x SoC series.



config PHY_RCAR_GEN2

	tristate "Renesas R-Car generation 2 USB PHY driver"

	depends on ARCH_RENESAS
@@ -373,7 +363,9 @@ config PHY_ROCKCHIP_INNO_USB2 
	tristate "Rockchip INNO USB2PHY Driver"

	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF

	depends on COMMON_CLK

	depends on USB_SUPPORT

	select GENERIC_PHY

	select USB_COMMON

	help

	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
@@ -438,14 +430,6 @@ config PHY_STIH407_USB 
	  Enable this support to enable the picoPHY device used by USB2

	  and USB3 controllers on STMicroelectronics STiH407 SoC families.



config PHY_STIH41X_USB

	tristate "STMicroelectronics USB2 PHY driver for STiH41x series"

	depends on ARCH_STI

	select GENERIC_PHY

	help

	  Enable this to support the USB transceiver that is part of

	  STMicroelectronics STiH41x SoC series.



config PHY_QCOM_UFS

	tristate "Qualcomm UFS PHY driver"

	depends on OF && ARCH_QCOM
@@ -489,4 +473,17 @@ config PHY_NS2_PCIE 
	help

	  Enable this to support the Broadcom Northstar2 PCIe PHY.

	  If unsure, say N.



config PHY_MESON8B_USB2

	tristate "Meson8b and GXBB USB2 PHY driver"

	default ARCH_MESON

	depends on OF && (ARCH_MESON || COMPILE_TEST)

	depends on USB_SUPPORT

	select USB_COMMON

	select GENERIC_PHY

	help

	  Enable this to support the Meson USB2 PHYs found in Meson8b

	  and GXBB SoCs.

	  If unsure, say N.



endmenu

drivers/phy/Makefile

+1 −2
Original line number Diff line number Diff line
@@ -18,7 +18,6 @@ obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o 
obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o

obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o

obj-$(CONFIG_PHY_MIPHY28LP) 		+= phy-miphy28lp.o

obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o

obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o

obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o

obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
@@ -50,7 +49,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o 
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o

obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o

obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o

obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o

obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o

obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o

obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
@@ -60,3 +58,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o 
obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o

obj-$(CONFIG_ARCH_TEGRA) += tegra/

obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o

obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o

drivers/phy/phy-berlin-sata.c

+1 −2
Original line number Diff line number Diff line
@@ -85,7 +85,6 @@ static int phy_berlin_sata_power_on(struct phy *phy) 
	struct phy_berlin_desc *desc = phy_get_drvdata(phy);

	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);

	void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);

	int ret = 0;

	u32 regval;



	clk_prepare_enable(priv->clk);
@@ -130,7 +129,7 @@ static int phy_berlin_sata_power_on(struct phy *phy) 


	clk_disable_unprepare(priv->clk);



	return ret;

	return 0;

}



static int phy_berlin_sata_power_off(struct phy *phy)

CRA Git | Maintained and supported by SUSTech CRA and CCSE