Merge tag 'ntb-4.13' of git://github.com/jonmason/ntb

# NTB Drivers

NTB (Non-Transparent Bridge) is a type of PCI-Express bridge chip that connects

the separate memory systems of two computers to the same PCI-Express fabric.

Existing NTB hardware supports a common feature set, including scratchpad

registers, doorbell registers, and memory translation windows.  Scratchpad

registers are read-and-writable registers that are accessible from either side

of the device, so that peers can exchange a small amount of information at a

fixed address.  Doorbell registers provide a way for peers to send interrupt

events.  Memory windows allow translated read and write access to the peer

memory.

the separate memory systems of two or more computers to the same PCI-Express

fabric. Existing NTB hardware supports a common feature set: doorbell

registers and memory translation windows, as well as non common features like

scratchpad and message registers. Scratchpad registers are read-and-writable

registers that are accessible from either side of the device, so that peers can

exchange a small amount of information at a fixed address. Message registers can

be utilized for the same purpose. Additionally they are provided with with

special status bits to make sure the information isn't rewritten by another

peer. Doorbell registers provide a way for peers to send interrupt events.

Memory windows allow translated read and write access to the peer memory.

## NTB Core Driver (ntb)

registration uses the Linux Device framework, so it should feel familiar to

anyone who has written a pci driver.

### NTB Typical client driver implementation

Primary purpose of NTB is to share some peace of memory between at least two

systems. So the NTB device features like Scratchpad/Message registers are

mainly used to perform the proper memory window initialization. Typically

there are two types of memory window interfaces supported by the NTB API:

inbound translation configured on the local ntb port and outbound translation

configured by the peer, on the peer ntb port. The first type is

depicted on the next figure

Inbound translation:

 Memory:              Local NTB Port:      Peer NTB Port:      Peer MMIO:

  ____________

 | dma-mapped |-ntb_mw_set_trans(addr)  |

 | memory     |        _v____________   |   ______________

 | (addr)     |<======| MW xlat addr |<====| MW base addr |<== memory-mapped IO

 |------------|       |--------------|  |  |--------------|

So typical scenario of the first type memory window initialization looks:

1) allocate a memory region, 2) put translated address to NTB config,

3) somehow notify a peer device of performed initialization, 4) peer device

maps corresponding outbound memory window so to have access to the shared

memory region.

The second type of interface, that implies the shared windows being

initialized by a peer device, is depicted on the figure:

Outbound translation:

 Memory:        Local NTB Port:    Peer NTB Port:      Peer MMIO:

  ____________                      ______________

 | dma-mapped |                |   | MW base addr |<== memory-mapped IO

 | memory     |                |   |--------------|

 | (addr)     |<===================| MW xlat addr |<-ntb_peer_mw_set_trans(addr)

 |------------|                |   |--------------|

Typical scenario of the second type interface initialization would be:

1) allocate a memory region, 2) somehow deliver a translated address to a peer

device, 3) peer puts the translated address to NTB config, 4) peer device maps

outbound memory window so to have access to the shared memory region.

As one can see the described scenarios can be combined in one portable

algorithm.

 Local device:

  1) Allocate memory for a shared window

  2) Initialize memory window by translated address of the allocated region

     (it may fail if local memory window initialization is unsupported)

  3) Send the translated address and memory window index to a peer device

 Peer device:

  1) Initialize memory window with retrieved address of the allocated

     by another device memory region (it may fail if peer memory window

     initialization is unsupported)

  2) Map outbound memory window

In accordance with this scenario, the NTB Memory Window API can be used as

follows:

 Local device:

  1) ntb_mw_count(pidx) - retrieve number of memory ranges, which can

     be allocated for memory windows between local device and peer device

     of port with specified index.

  2) ntb_get_align(pidx, midx) - retrieve parameters restricting the

     shared memory region alignment and size. Then memory can be properly

     allocated.

  3) Allocate physically contiguous memory region in compliance with

     restrictions retrieved in 2).

  4) ntb_mw_set_trans(pidx, midx) - try to set translation address of

     the memory window with specified index for the defined peer device

     (it may fail if local translated address setting is not supported)

  5) Send translated base address (usually together with memory window

     number) to the peer device using, for instance, scratchpad or message

     registers.

 Peer device:

  1) ntb_peer_mw_set_trans(pidx, midx) - try to set received from other

     device (related to pidx) translated address for specified memory

     window. It may fail if retrieved address, for instance, exceeds

     maximum possible address or isn't properly aligned.

  2) ntb_peer_mw_get_addr(widx) - retrieve MMIO address to map the memory

     window so to have an access to the shared memory.

Also it is worth to note, that method ntb_mw_count(pidx) should return the

same value as ntb_peer_mw_count() on the peer with port index - pidx.

### NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)

The primary client for NTB is the Transport client, used in tandem with NTB

F:	include/linux/ntb_transport.h

F:	tools/testing/selftests/ntb/

NTB IDT DRIVER

M:	Serge Semin <fancer.lancer@gmail.com>

L:	linux-ntb@googlegroups.com

S:	Supported

F:	drivers/ntb/hw/idt/

NTB INTEL DRIVER

M:	Jon Mason <jdmason@kudzu.us>

M:	Dave Jiang <dave.jiang@intel.com>

	if (!ndev)

		return -ENOMEM;

	SET_NETDEV_DEV(ndev, client_dev);

	dev = netdev_priv(ndev);

	dev->ndev = ndev;

	dev->pdev = pdev;

source "drivers/ntb/hw/amd/Kconfig"

source "drivers/ntb/hw/idt/Kconfig"

source "drivers/ntb/hw/intel/Kconfig"

obj-$(CONFIG_NTB_AMD)	+= amd/

obj-$(CONFIG_NTB_IDT)	+= idt/

obj-$(CONFIG_NTB_INTEL)	+= intel/