Commit cccdceb9 authored by Viresh Kumar's avatar Viresh Kumar Committed by Samuel Ortiz
Browse files

gpio: Add support for stmpe variant 801 



STMPE801 is a GPIO expander. GPIO registers for 801 are slightly different from other
variants. This patch adds support for STMPE801 in stmpe gpio driver.

Signed-off-by: default avatarBhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: default avatarPratyush Anand <pratyush.anand@st.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 7f7f4ea1

drivers/gpio/gpio-stmpe.c

+22 −3
Original line number Diff line number Diff line
@@ -65,6 +65,13 @@ static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) 
	u8 reg = stmpe->regs[which] - (offset / 8);

	u8 mask = 1 << (offset % 8);



	/*

	 * Some variants have single register for gpio set/clear functionality.

	 * For them we need to write 0 to clear and 1 to set.

	 */

	if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])

		stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);

	else

		stmpe_reg_write(stmpe, reg, mask);

}
@@ -132,6 +139,10 @@ static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) 
	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)

		return -EINVAL;



	/* STMPE801 doesn't have RE and FE registers */

	if (stmpe_gpio->stmpe->partnum == STMPE801)

		return 0;



	if (type == IRQ_TYPE_EDGE_RISING)

		stmpe_gpio->regs[REG_RE][regoffset] |= mask;

	else
@@ -165,6 +176,11 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) 
	int i, j;



	for (i = 0; i < CACHE_NR_REGS; i++) {

		/* STMPE801 doesn't have RE and FE registers */

		if ((stmpe->partnum == STMPE801) &&

				(i != REG_IE))

			continue;



		for (j = 0; j < num_banks; j++) {

			u8 old = stmpe_gpio->oldregs[i][j];

			u8 new = stmpe_gpio->regs[i][j];
@@ -241,8 +257,11 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) 
		}



		stmpe_reg_write(stmpe, statmsbreg + i, status[i]);

		stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,

				status[i]);



		/* Edge detect register is not present on 801 */

		if (stmpe->partnum != STMPE801)

			stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB]

					+ i, status[i]);

	}



	return IRQ_HANDLED;

CRA Git | Maintained and supported by SUSTech CRA and CCSE