Commit cba6c850 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

Merge tag 'gadget-for-v3.9' of... 

Merge tag 'gadget-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:
	usb: gadget: patches for v3.9 merge window

	finally getting rid of the old ->start()/->stop() methods
	in favor of the better and improved ->udc_start()/->udc_stop().

	There were surprisingly quite a few users left, but all of them
	have been converted.

	f_mass_storage removed some dead code, which is always great ;-)

	There's also a big cleanup to the gadget framework from Sebastian
	which gets us a lot closer to having only function drivers in
	kernel and move over to configfs-based binding.

	Other than these, there's the usual set of cleanups: s3c UDCs are
	moving over to devm_regulator_bulk_get() API, at91_udc removed
	an unnecessary check for work_pending() before scheduling and
	there's the removal of an unused variable from uac2_pcm_trigger().
parents a9b8676c eeef4587

drivers/usb/gadget/Kconfig

+20 −0
Original line number Diff line number Diff line
@@ -500,6 +500,15 @@ config USB_LIBCOMPOSITE 
	tristate

	depends on USB_GADGET



config USB_F_ACM

	tristate



config USB_F_SS_LB

	tristate



config USB_U_SERIAL

	tristate



choice

	tristate "USB Gadget Drivers"

	default USB_ETH
@@ -524,6 +533,7 @@ choice 
config USB_ZERO

	tristate "Gadget Zero (DEVELOPMENT)"

	select USB_LIBCOMPOSITE

	select USB_F_SS_LB

	help

	  Gadget Zero is a two-configuration device.  It either sinks and

	  sources bulk data; or it loops back a configurable number of
@@ -750,6 +760,8 @@ config USB_GADGET_TARGET 


config USB_G_SERIAL

	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"

	select USB_U_SERIAL

	select USB_F_ACM

	select USB_LIBCOMPOSITE

	help

	  The Serial Gadget talks to the Linux-USB generic serial driver.
@@ -803,6 +815,8 @@ config USB_CDC_COMPOSITE 
	tristate "CDC Composite Device (Ethernet and ACM)"

	depends on NET

	select USB_LIBCOMPOSITE

	select USB_U_SERIAL

	select USB_F_ACM

	help

	  This driver provides two functions in one configuration:

	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
@@ -818,6 +832,7 @@ config USB_G_NOKIA 
	tristate "Nokia composite gadget"

	depends on PHONET

	select USB_LIBCOMPOSITE

	select USB_U_SERIAL

	help

	  The Nokia composite gadget provides support for acm, obex

	  and phonet in only one composite gadget driver.
@@ -829,6 +844,8 @@ config USB_G_ACM_MS 
	tristate "CDC Composite Device (ACM and mass storage)"

	depends on BLOCK

	select USB_LIBCOMPOSITE

	select USB_U_SERIAL

	select USB_F_ACM

	help

	  This driver provides two functions in one configuration:

	  a mass storage, and a CDC ACM (serial port) link.
@@ -841,6 +858,8 @@ config USB_G_MULTI 
	depends on BLOCK && NET

	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS

	select USB_LIBCOMPOSITE

	select USB_U_SERIAL

	select USB_F_ACM

	help

	  The Multifunction Composite Gadget provides Ethernet (RNDIS

	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -916,6 +935,7 @@ config USB_G_DBGP_PRINTK 


config USB_G_DBGP_SERIAL

	depends on USB_G_DBGP

	select USB_U_SERIAL

	bool "serial"

	help

	  Userland can interact using /dev/ttyGSxxx.

drivers/usb/gadget/Makefile

+7 −1
Original line number Diff line number Diff line
@@ -6,7 +6,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG 
obj-$(CONFIG_USB_GADGET)	+= udc-core.o

obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o

libcomposite-y			:= usbstring.o config.o epautoconf.o

libcomposite-y			+= composite.o

libcomposite-y			+= composite.o functions.o

obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o

obj-$(CONFIG_USB_NET2272)	+= net2272.o

obj-$(CONFIG_USB_NET2280)	+= net2280.o
@@ -74,3 +74,9 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o 
obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o

obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o

obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o



# USB Functions

obj-$(CONFIG_USB_F_ACM)		+= f_acm.o

f_ss_lb-y			:= f_loopback.o f_sourcesink.o

obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o

obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o

drivers/usb/gadget/acm_ms.c

+31 −11
Original line number Diff line number Diff line
@@ -40,9 +40,6 @@ 
 * the runtime footprint, and giving us at least some parts of what

 * a "gcc --combine ... part1.c part2.c part3.c ... " build would.

 */



#include "u_serial.c"

#include "f_acm.c"

#include "f_mass_storage.c"



/*-------------------------------------------------------------------------*/
@@ -112,12 +109,15 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); 
static struct fsg_common fsg_common;



/*-------------------------------------------------------------------------*/



static unsigned char tty_line;

static struct usb_function *f_acm;

static struct usb_function_instance *f_acm_inst;

/*

 * We _always_ have both ACM and mass storage functions.

 */

static int __init acm_ms_do_config(struct usb_configuration *c)

{

	struct f_serial_opts *opts;

	int	status;



	if (gadget_is_otg(c->cdev->gadget)) {
@@ -125,16 +125,35 @@ static int __init acm_ms_do_config(struct usb_configuration *c) 
		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;

	}



	f_acm_inst = usb_get_function_instance("acm");

	if (IS_ERR(f_acm_inst))

		return PTR_ERR(f_acm_inst);



	opts = container_of(f_acm_inst, struct f_serial_opts, func_inst);

	opts->port_num = tty_line;



	f_acm = usb_get_function(f_acm_inst);

	if (IS_ERR(f_acm)) {

		status = PTR_ERR(f_acm);

		goto err_func;

	}



	status = acm_bind_config(c, 0);

	status = usb_add_function(c, f_acm);

	if (status < 0)

		return status;

		goto err_conf;



	status = fsg_bind_config(c->cdev, c, &fsg_common);

	if (status < 0)

		return status;

		goto err_fsg;



	return 0;

err_fsg:

	usb_remove_function(c, f_acm);

err_conf:

	usb_put_function(f_acm);

err_func:

	usb_put_function_instance(f_acm_inst);

	return status;

}



static struct usb_configuration acm_ms_config_driver = {
@@ -153,7 +172,7 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) 
	void			*retp;



	/* set up serial link layer */

	status = gserial_setup(cdev->gadget, 1);

	status = gserial_alloc_line(&tty_line);

	if (status < 0)

		return status;
@@ -189,14 +208,15 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) 
fail1:

	fsg_common_put(&fsg_common);

fail0:

	gserial_cleanup();

	gserial_free_line(tty_line);

	return status;

}



static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)

{

	gserial_cleanup();



	usb_put_function(f_acm);

	usb_put_function_instance(f_acm_inst);

	gserial_free_line(tty_line);

	return 0;

}

drivers/usb/gadget/amd5536udc.c

+14 −45
Original line number Diff line number Diff line
@@ -1400,15 +1400,16 @@ static int udc_wakeup(struct usb_gadget *gadget) 
	return 0;

}



static int amd5536_start(struct usb_gadget_driver *driver,

		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));

static int amd5536_stop(struct usb_gadget_driver *driver);

static int amd5536_udc_start(struct usb_gadget *g,

		struct usb_gadget_driver *driver);

static int amd5536_udc_stop(struct usb_gadget *g,

		struct usb_gadget_driver *driver);

/* gadget operations */

static const struct usb_gadget_ops udc_ops = {

	.wakeup		= udc_wakeup,

	.get_frame	= udc_get_frame,

	.start		= amd5536_start,

	.stop		= amd5536_stop,

	.udc_start	= amd5536_udc_start,

	.udc_stop	= amd5536_udc_stop,

};



/* Setups endpoint parameters, adds endpoints to linked list */
@@ -1913,41 +1914,22 @@ static int setup_ep0(struct udc *dev) 
}



/* Called by gadget driver to register itself */

static int amd5536_start(struct usb_gadget_driver *driver,

		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))

static int amd5536_udc_start(struct usb_gadget *g,

		struct usb_gadget_driver *driver)

{

	struct udc		*dev = udc;

	int			retval;

	struct udc *dev = to_amd5536_udc(g);

	u32 tmp;



	if (!driver || !bind || !driver->setup

			|| driver->max_speed < USB_SPEED_HIGH)

		return -EINVAL;

	if (!dev)

		return -ENODEV;

	if (dev->driver)

		return -EBUSY;



	driver->driver.bus = NULL;

	dev->driver = driver;

	dev->gadget.dev.driver = &driver->driver;



	retval = bind(&dev->gadget, driver);



	/* Some gadget drivers use both ep0 directions.

	 * NOTE: to gadget driver, ep0 is just one endpoint...

	 */

	dev->ep[UDC_EP0OUT_IX].ep.driver_data =

		dev->ep[UDC_EP0IN_IX].ep.driver_data;



	if (retval) {

		DBG(dev, "binding to %s returning %d\n",

				driver->driver.name, retval);

		dev->driver = NULL;

		dev->gadget.dev.driver = NULL;

		return retval;

	}



	/* get ready for ep0 traffic */

	setup_ep0(dev);
@@ -1969,14 +1951,9 @@ __acquires(dev->lock) 
{

	int tmp;



	if (dev->gadget.speed != USB_SPEED_UNKNOWN) {

		spin_unlock(&dev->lock);

		driver->disconnect(&dev->gadget);

		spin_lock(&dev->lock);

	}



	/* empty queues and init hardware */

	udc_basic_init(dev);



	for (tmp = 0; tmp < UDC_EP_NUM; tmp++)

		empty_req_queue(&dev->ep[tmp]);
@@ -1984,23 +1961,18 @@ __acquires(dev->lock) 
}



/* Called by gadget driver to unregister itself */

static int amd5536_stop(struct usb_gadget_driver *driver)

static int amd5536_udc_stop(struct usb_gadget *g,

		struct usb_gadget_driver *driver)

{

	struct udc	*dev = udc;

	struct udc *dev = to_amd5536_udc(g);

	unsigned long flags;

	u32 tmp;



	if (!dev)

		return -ENODEV;

	if (!driver || driver != dev->driver || !driver->unbind)

		return -EINVAL;



	spin_lock_irqsave(&dev->lock, flags);

	udc_mask_unused_interrupts(dev);

	shutdown(dev, driver);

	spin_unlock_irqrestore(&dev->lock, flags);



	driver->unbind(&dev->gadget);

	dev->gadget.dev.driver = NULL;

	dev->driver = NULL;
@@ -2009,9 +1981,6 @@ static int amd5536_stop(struct usb_gadget_driver *driver) 
	tmp |= AMD_BIT(UDC_DEVCTL_SD);

	writel(tmp, &dev->regs->ctl);





	DBG(dev, "%s: unregistered\n", driver->driver.name);



	return 0;

}

drivers/usb/gadget/amd5536udc.h

+2 −0
Original line number Diff line number Diff line
@@ -563,6 +563,8 @@ struct udc { 
	u16				cur_alt;

};



#define to_amd5536_udc(g)	(container_of((g), struct udc, gadget))



/* setup request data */

union udc_setup_data {

	u32			data[2];

CRA Git | Maintained and supported by SUSTech CRA and CCSE