Commit cb99864d authored by Damien Zammit's avatar Damien Zammit Committed by Takashi Iwai
Browse files

ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card: 



This patch is the result of a lot of trial and error, since there are no specs
available for the device.

Full duplex support is provided, i.e. playback and recording in stereo.
The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the
device supports.  Also, MIDI in and MIDI out both work.

Users will notice that the S/PDIF light also flashes when playback or recording
is active.  I believe this means that S/PDIF input/output is simultaneously
activated with the analogue i/o during use.
But this particular functionality remains untested.

Note that this particular version of the patch is so far untested on the
physical hardware because I have not compiled a full kernel with the changes.
However, extensive testing has been done by many users of the hardware
who believe other versions of my patch have worked since circa 2009.

[Modified to make a function static by tiwai]

Signed-off-by: default avatarDamien Zammit <damien@zamaudio.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 44728e97

sound/usb/midi.c

+4 −0
Original line number Diff line number Diff line
@@ -2181,6 +2181,10 @@ int snd_usbmidi_create(struct snd_card *card, 
		umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;

		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);

		break;

	case QUIRK_MIDI_MBOX2:

		umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;

		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);

		break;

	case QUIRK_MIDI_RAW_BYTES:

		umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;

		/*

sound/usb/quirks-table.h

+87 −0
Original line number Diff line number Diff line
@@ -2921,6 +2921,93 @@ YAMAHA_DEVICE(0x7010, "UB99"), 


	}

},



/* DIGIDESIGN MBOX 2 */

{

	USB_DEVICE(0x0dba, 0x3000),

	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {

		.vendor_name = "Digidesign",

		.product_name = "Mbox 2",

		.ifnum = QUIRK_ANY_INTERFACE,

		.type = QUIRK_COMPOSITE,

		.data = (const struct snd_usb_audio_quirk[]) {

			{

				.ifnum = 0,

				.type = QUIRK_IGNORE_INTERFACE

			},

			{

				.ifnum = 1,

				.type = QUIRK_IGNORE_INTERFACE

			},

			{

				.ifnum = 2,

				.type = QUIRK_AUDIO_FIXED_ENDPOINT,

				.data = &(const struct audioformat) {

					.formats = SNDRV_PCM_FMTBIT_S24_3BE,

					.channels = 2,

					.iface = 2,

					.altsetting = 2,

					.altset_idx = 1,

					.attributes = 0x00,

					.endpoint = 0x03,

					.ep_attr = USB_ENDPOINT_SYNC_ASYNC,

					.maxpacksize = 0x128,

					.rates = SNDRV_PCM_RATE_48000,

					.rate_min = 48000,

					.rate_max = 48000,

					.nr_rates = 1,

					.rate_table = (unsigned int[]) {

						48000

					}

				}

			},

			{

				.ifnum = 3,

				.type = QUIRK_IGNORE_INTERFACE

			},

			{

				.ifnum = 4,

				.type = QUIRK_AUDIO_FIXED_ENDPOINT,

				.data = &(const struct audioformat) {

				.formats = SNDRV_PCM_FMTBIT_S24_3BE,

					.channels = 2,

					.iface = 4,

					.altsetting = 2,

					.altset_idx = 1,

					.attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,

					.endpoint = 0x85,

					.ep_attr = USB_ENDPOINT_SYNC_SYNC,

					.maxpacksize = 0x128,

					.rates = SNDRV_PCM_RATE_48000,

					.rate_min = 48000,

					.rate_max = 48000,

					.nr_rates = 1,

					.rate_table = (unsigned int[]) {

						48000

					}

				}

			},

			{

				.ifnum = 5,

				.type = QUIRK_IGNORE_INTERFACE

			},

			{

				.ifnum = 6,

				.type = QUIRK_MIDI_MBOX2,

				.data = &(const struct snd_usb_midi_endpoint_info) {

					.out_ep =  0x02,

					.out_cables = 0x0001,

					.in_ep = 0x81,

					.in_interval = 0x01,

					.in_cables = 0x0001

				}

			},

			{

				.ifnum = -1

			}

		}

	}

},

{

	/* Tascam US122 MKII - playback-only support */

	.match_flags = USB_DEVICE_ID_MATCH_DEVICE,

sound/usb/quirks.c

+91 −0
Original line number Diff line number Diff line
@@ -306,6 +306,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, 
		[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,

		[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,

		[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,

		[QUIRK_MIDI_MBOX2] = create_any_midi_quirk,

		[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,

		[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,

		[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -497,6 +498,92 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) 
	return -EAGAIN;

}



static void mbox2_setup_48_24_magic(struct usb_device *dev)

{

	u8 srate[3];

	u8 temp[12];



	/* Choose 48000Hz permanently */

	srate[0] = 0x80;

	srate[1] = 0xbb;

	srate[2] = 0x00;



	/* Send the magic! */

	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),

		0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);

	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),

		0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);

	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),

		0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);

	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),

		0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);

	return;

}



/* Digidesign Mbox 2 needs to load firmware onboard

 * and driver must wait a few seconds for initialisation.

 */



#define MBOX2_FIRMWARE_SIZE    646

#define MBOX2_BOOT_LOADING     0x01 /* Hard coded into the device */

#define MBOX2_BOOT_READY       0x02 /* Hard coded into the device */



int snd_usb_mbox2_boot_quirk(struct usb_device *dev)

{

	struct usb_host_config *config = dev->actconfig;

	int err;

	u8 bootresponse;

	int fwsize;

	int count;



	fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);



	if (fwsize != MBOX2_FIRMWARE_SIZE) {

		snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);

		return -ENODEV;

	}



	snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");



	count = 0;

	bootresponse = MBOX2_BOOT_LOADING;

	while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {

		msleep(500); /* 0.5 second delay */

		snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),

			/* Control magic - load onboard firmware */

			0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);

		if (bootresponse == MBOX2_BOOT_READY)

			break;

		snd_printd("usb-audio: device not ready, resending boot sequence...\n");

		count++;

	}



	if (bootresponse != MBOX2_BOOT_READY) {

		snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);

		return -ENODEV;

	}



	snd_printdd("usb-audio: device initialised!\n");



	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,

		&dev->descriptor, sizeof(dev->descriptor));

	config = dev->actconfig;

	if (err < 0)

		snd_printd("error usb_get_descriptor: %d\n", err);



	err = usb_reset_configuration(dev);

	if (err < 0)

		snd_printd("error usb_reset_configuration: %d\n", err);

	snd_printdd("mbox2_boot: new boot length = %d\n",

		le16_to_cpu(get_cfg_desc(config)->wTotalLength));



	mbox2_setup_48_24_magic(dev);



	snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");



	return 0; /* Successful boot */

}



/*

 * Setup quirks

 */
@@ -655,6 +742,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, 
	case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */

		return snd_usb_cm6206_boot_quirk(dev);



	case USB_ID(0x0dba, 0x3000):

		/* Digidesign Mbox 2 */

		return snd_usb_mbox2_boot_quirk(dev);



	case USB_ID(0x133e, 0x0815):

		/* Access Music VirusTI Desktop */

		return snd_usb_accessmusic_boot_quirk(dev);

sound/usb/usbaudio.h

+1 −0
Original line number Diff line number Diff line
@@ -76,6 +76,7 @@ enum quirk_type { 
	QUIRK_MIDI_YAMAHA,

	QUIRK_MIDI_MIDIMAN,

	QUIRK_MIDI_NOVATION,

	QUIRK_MIDI_MBOX2,

	QUIRK_MIDI_RAW_BYTES,

	QUIRK_MIDI_EMAGIC,

	QUIRK_MIDI_CME,

CRA Git | Maintained and supported by SUSTech CRA and CCSE