Commit c9a0ef55 authored by Brian Masney's avatar Brian Masney Committed by Linus Walleij
Browse files

ARM: dts: qcom: pma8084: add interrupt controller properties 



Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.

Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Reviewed-by: default avatarStephen Boyd <sboyd@kernel.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 5f540fb4

arch/arm/boot/dts/qcom-pma8084.dtsi

+2 −22
Original line number Diff line number Diff line
@@ -32,28 +32,8 @@ 
			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,

				     <0 0xc1 0 IRQ_TYPE_NONE>,

				     <0 0xc2 0 IRQ_TYPE_NONE>,

				     <0 0xc3 0 IRQ_TYPE_NONE>,

				     <0 0xc4 0 IRQ_TYPE_NONE>,

				     <0 0xc5 0 IRQ_TYPE_NONE>,

				     <0 0xc6 0 IRQ_TYPE_NONE>,

				     <0 0xc7 0 IRQ_TYPE_NONE>,

				     <0 0xc8 0 IRQ_TYPE_NONE>,

				     <0 0xc9 0 IRQ_TYPE_NONE>,

				     <0 0xca 0 IRQ_TYPE_NONE>,

				     <0 0xcb 0 IRQ_TYPE_NONE>,

				     <0 0xcc 0 IRQ_TYPE_NONE>,

				     <0 0xcd 0 IRQ_TYPE_NONE>,

				     <0 0xce 0 IRQ_TYPE_NONE>,

				     <0 0xcf 0 IRQ_TYPE_NONE>,

				     <0 0xd0 0 IRQ_TYPE_NONE>,

				     <0 0xd1 0 IRQ_TYPE_NONE>,

				     <0 0xd2 0 IRQ_TYPE_NONE>,

				     <0 0xd3 0 IRQ_TYPE_NONE>,

				     <0 0xd4 0 IRQ_TYPE_NONE>,

				     <0 0xd5 0 IRQ_TYPE_NONE>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};



		pma8084_mpps: mpps@a000 {

CRA Git | Maintained and supported by SUSTech CRA and CCSE