ARM: dts: zynq: Add support for Z-turn board (c998911f) · Commits · 戴 / test

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -1109,6 +1109,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
		zynq-zc770-xm012.dtb \
		zynq-zc770-xm013.dtb \
		zynq-zed.dtb \
		zynq-zturn.dtb \
		zynq-zybo.dtb \
		zynq-zybo-z7.dtb
		dtb-$(CONFIG_MACH_ARMADA_370) += \

arch/arm/boot/dts/zynq-zturn.dts

0 → 100644

+116 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		/*
		* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
		* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
		*
		* Based on zynq-zed.dts which is:
		* Copyright (C) 2011 - 2014 Xilinx
		* Copyright (C) 2012 National Instruments Corp.
		*
		*/

		/dts-v1/;
		/include/ "zynq-7000.dtsi"

		/ {
		model = "Zynq Z-Turn MYIR Board";
		compatible = "myir,zynq-zturn", "xlnx,zynq-7000";

		aliases {
		ethernet0 = &gem0;
		serial0 = &uart1;
		serial1 = &uart0;
		mmc0 = &sdhci0;
		};

		memory@0 {
		device_type = "memory";
		reg = <0x0 0x40000000>;
		};

		chosen {
		stdout-path = "serial0:115200n8";
		};

		gpio-leds {
		compatible = "gpio-leds";
		usr-led1 {
		label = "usr-led1";
		gpios = <&gpio0 0x0 0x1>;
		default-state = "off";
		};

		usr-led2 {
		label = "usr-led2";
		gpios = <&gpio0 0x9 0x1>;
		default-state = "off";
		};
		};

		gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		autorepeat;
		K1 {
		label = "K1";
		gpios = <&gpio0 0x32 0x1>;
		linux,code = <0x66>;
		gpio-key,wakeup;
		autorepeat;
		};
		};
		};

		&clkc {
		ps-clk-frequency = <33333333>;
		};

		&gem0 {
		status = "okay";
		phy-mode = "rgmii-id";
		phy-handle = <&ethernet_phy>;

		ethernet_phy: ethernet-phy@0 {
		reg = <0x0>;
		};
		};

		&sdhci0 {
		status = "okay";
		};

		&uart0 {
		status = "okay";
		};

		&uart1 {
		status = "okay";
		};

		&usb0 {
		status = "okay";
		dr_mode = "host";
		};

		&can0 {
		status = "okay";
		};

		&i2c0 {
		status = "okay";
		clock-frequency = <400000>;

		stlm75@49 {
		status = "okay";
		compatible = "lm75";
		reg = <0x49>;
		};

		accelerometer@53 {
		compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
		reg = <0x53>;
		interrupt-parent = <&intc>;
		interrupts = <0x0 0x1e 0x4>;
		};
		};

Admin message