MIPS: Netlogic: Merge platform usb.h to usb-init.c

/*

 * Copyright (c) 2003-2012 Broadcom Corporation

 * All Rights Reserved

 *

 * This software is available to you under a choice of one of two

 * licenses.  You may choose to be licensed under the terms of the GNU

 * General Public License (GPL) Version 2, available from the file

 * COPYING in the main directory of this source tree, or the Broadcom

 * license below:

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions

 * are met:

 *

 * 1. Redistributions of source code must retain the above copyright

 *    notice, this list of conditions and the following disclaimer.

 * 2. Redistributions in binary form must reproduce the above copyright

 *    notice, this list of conditions and the following disclaimer in

 *    the documentation and/or other materials provided with the

 *    distribution.

 *

 * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR

 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

 * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE

 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */

#ifndef __NLM_HAL_USB_H__

#define __NLM_HAL_USB_H__

#define USB_CTL_0			0x01

#define USB_PHY_0			0x0A

#define USB_PHY_RESET			0x01

#define USB_PHY_PORT_RESET_0		0x10

#define USB_PHY_PORT_RESET_1		0x20

#define USB_CONTROLLER_RESET		0x01

#define USB_INT_STATUS			0x0E

#define USB_INT_EN			0x0F

#define USB_PHY_INTERRUPT_EN		0x01

#define USB_OHCI_INTERRUPT_EN		0x02

#define USB_OHCI_INTERRUPT1_EN		0x04

#define USB_OHCI_INTERRUPT2_EN		0x08

#define USB_CTRL_INTERRUPT_EN		0x10

#ifndef __ASSEMBLY__

#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)

#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)

#define nlm_get_usb_pcibase(node, inst)		\

	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))

#define nlm_get_usb_hcd_base(node, inst)	\

	nlm_xkphys_map_pcibar0(nlm_get_usb_pcibase(node, inst))

#define nlm_get_usb_regbase(node, inst)		\

	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)

#endif

#endif /* __NLM_HAL_USB_H__ */

#include <asm/netlogic/haldefs.h>

#include <asm/netlogic/xlp-hal/iomap.h>

#include <asm/netlogic/xlp-hal/xlp.h>

#include <asm/netlogic/xlp-hal/usb.h>

/*

 * USB glue logic registers, used only during initialization

 */

#define USB_CTL_0			0x01

#define USB_PHY_0			0x0A

#define USB_PHY_RESET			0x01

#define USB_PHY_PORT_RESET_0		0x10

#define USB_PHY_PORT_RESET_1		0x20

#define USB_CONTROLLER_RESET		0x01

#define USB_INT_STATUS			0x0E

#define USB_INT_EN			0x0F

#define USB_PHY_INTERRUPT_EN		0x01

#define USB_OHCI_INTERRUPT_EN		0x02

#define USB_OHCI_INTERRUPT1_EN		0x04

#define USB_OHCI_INTERRUPT2_EN		0x08

#define USB_CTRL_INTERRUPT_EN		0x10

#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)

#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)

#define nlm_get_usb_pcibase(node, inst)		\

	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))

#define nlm_get_usb_regbase(node, inst)		\

	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)

static void nlm_usb_intr_en(int node, int port)

{