Commit c7de7dec authored by hayeswang's avatar hayeswang Committed by David S. Miller
Browse files

r8152: ecm and vendor modes coexist 



Remove the limitation that the ecm and r8152 drivers couldn't coexist.
 - Remove the devices from the blacklist of relative drivers.
 - Remove usb_driver_set_configuration() from r8152 driver.
 - Modify the id_table of the r8152 driver for the vendor mode only.

Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9629e3c0

drivers/net/usb/cdc_ether.c

+0 −9
Original line number Diff line number Diff line
@@ -653,15 +653,6 @@ static const struct usb_device_id products[] = { 
	.driver_info = 0,

},



#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)

/* Samsung USB Ethernet Adapters */

{

	USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,

			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),

	.driver_info = 0,

},

#endif



/* WHITELIST!!!

 *

 * CDC Ether uses two interfaces, not necessarily consecutive.

drivers/net/usb/r8152.c

+8 −10
Original line number Diff line number Diff line 
/*

 *  Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved.

 *  Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License
@@ -24,7 +24,7 @@ 
#include <linux/ipv6.h>



/* Version Information */

#define DRIVER_VERSION "v1.03.0 (2013/12/26)"

#define DRIVER_VERSION "v1.04.0 (2014/01/15)"

#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"

#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"

#define MODULENAME "r8152"
@@ -450,6 +450,9 @@ enum rtl8152_flags { 
#define MCU_TYPE_PLA			0x0100

#define MCU_TYPE_USB			0x0000



#define REALTEK_USB_DEVICE(vend, prod)	\

	USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC)



struct rx_desc {

	__le32 opts1;

#define RX_LEN_MASK			0x7fff
@@ -2738,11 +2741,6 @@ static int rtl8152_probe(struct usb_interface *intf, 
	struct net_device *netdev;

	int ret;



	if (udev->actconfig->desc.bConfigurationValue != 1) {

		usb_driver_set_configuration(udev, 1);

		return -ENODEV;

	}



	netdev = alloc_etherdev(sizeof(struct r8152));

	if (!netdev) {

		dev_err(&intf->dev, "Out of memory\n");
@@ -2823,9 +2821,9 @@ static void rtl8152_disconnect(struct usb_interface *intf) 


/* table of devices that work with this driver */

static struct usb_device_id rtl8152_table[] = {

	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},

	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},

	{USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},

	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},

	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},

	{REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},

	{}

};

drivers/net/usb/r815x.c

+0 −8
Original line number Diff line number Diff line
@@ -216,21 +216,13 @@ static const struct usb_device_id products[] = { 
{

	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,

			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),

#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)

	.driver_info = 0,

#else

	.driver_info = (unsigned long) &r8152_info,

#endif

},



{

	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,

			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),

#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)

	.driver_info = 0,

#else

	.driver_info = (unsigned long) &r8153_info,

#endif

},



	{ },		/* END */

CRA Git | Maintained and supported by SUSTech CRA and CCSE