Commit c7985d8c authored by Jonathan Bakker's avatar Jonathan Bakker Committed by Krzysztof Kozlowski
Browse files

ARM: dts: s5pv210: Add support for more devices present on Aries 



This commit enables following devices present on Aries based phones:
- pwm-vibrator attached to PWM 1
- poweroff support
- Atmel maXTouch touchscreen, connected to I2C-2
- Broadcom BCM4329 Bluetooth over UART-0

Signed-off-by: default avatarJonathan Bakker <xc-racer2@live.ca>
Signed-off-by: default avatarPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 657846f7

arch/arm/boot/dts/s5pv210-aries.dtsi

+68 −0
Original line number Diff line number Diff line
@@ -41,6 +41,13 @@ 
		};

	};



	vibrator_pwr: regulator-fixed-0 {

		compatible = "regulator-fixed";

		regulator-name = "vibrator-en";

		enable-active-high;

		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;

	};



	wifi_pwrseq: wifi-pwrseq {

		compatible = "mmc-pwrseq-simple";

		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
@@ -314,6 +321,22 @@ 
			reg = <0x36>;

		};

	};



	vibrator: pwm-vibrator {

		compatible = "pwm-vibrator";

		pwms = <&pwm 1 44642 0>;

		pwm-names = "enable";

		vcc-supply = <&vibrator_pwr>;

		pinctrl-names = "default";

		pinctrl-0 = <&pwm1_out>;

	};



	poweroff: syscon-poweroff {

		compatible = "syscon-poweroff";

		regmap = <&pmu_syscon>;

		offset = <0x681c>; /* PS_HOLD_CONTROL */

		value = <0x5200>;

	};

};



&fimd {
@@ -347,6 +370,23 @@ 
	status = "okay";

};



&i2c2 {

	samsung,i2c-sda-delay = <100>;

	samsung,i2c-max-bus-freq = <400000>;

	samsung,i2c-slave-addr = <0x10>;

	status = "okay";



	touchscreen@4a {

		compatible = "atmel,maxtouch";

		reg = <0x4a>;

		interrupt-parent = <&gpj0>;

		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;

		pinctrl-names = "default";

		pinctrl-0 = <&ts_irq>;

		reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>;

	};

};



&mfc {

	memory-region = <&mfc_left>, <&mfc_right>;

};
@@ -372,6 +412,13 @@ 
		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

	};



	bt_host_wake: bt-host-wake {

		samsung,pins = "gph2-5";

		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;

		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

	};



	tf_detect: tf-detect {

		samsung,pins = "gph3-4";

		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -384,6 +431,17 @@ 
		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;

	};



	ts_irq: ts-irq {

		samsung,pins = "gpj0-5";

		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;

		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;

		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

	};

};



&pwm {

	samsung,pwm-outputs = <1>;

};



&sdhci1 {
@@ -421,6 +479,16 @@ 


&uart0 {

	status = "okay";



	bluetooth {

		compatible = "brcm,bcm43438-bt";

		max-speed = <115200>;

		pinctrl-names = "default";

		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>;

		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;

		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;

		host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>;

	};

};



&uart1 {

CRA Git | Maintained and supported by SUSTech CRA and CCSE