Commit c71335e7 authored by Andreas Faerber's avatar Andreas Faerber Committed by Kukjin Kim
Browse files

ARM: dts: Clean up exynos5250-arndale 



Use the new style of referencing inherited nodes, use symbolic names,
tidy indentation and reorder includes.

Goal is the alignment of all exynos5250 based device trees for
comparison.

Signed-off-by: default avatarAndreas Faerber <afaerber@suse.de>
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
[kgene.kim@samsung.com: rebased]
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent adca3e61

arch/arm/boot/dts/exynos5250-arndale.dts

+456 −453
Original line number Diff line number Diff line
@@ -10,9 +10,10 @@ 
 */



/dts-v1/;

#include "exynos5250.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/input/input.h>

#include "exynos5250.dtsi"



/ {

	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -26,20 +27,145 @@ 
		bootargs = "console=ttySAC2,115200";

	};



	rtc@101E0000 {

	gpio_keys {

		compatible = "gpio-keys";



		menu {

			label = "SW-TACT2";

			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_MENU>;

			gpio-key,wakeup;

		};



		home {

			label = "SW-TACT3";

			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_HOME>;

			gpio-key,wakeup;

		};



		up {

			label = "SW-TACT4";

			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_UP>;

			gpio-key,wakeup;

		};



		down {

			label = "SW-TACT5";

			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_DOWN>;

			gpio-key,wakeup;

		};



		back {

			label = "SW-TACT6";

			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_BACK>;

			gpio-key,wakeup;

		};



		wakeup {

			label = "SW-TACT7";

			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_WAKEUP>;

			gpio-key,wakeup;

		};

	};



	regulators {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		main_dc_reg: regulator@0 {

			compatible = "regulator-fixed";

			reg = <0>;

			regulator-name = "MAIN_DC";

		};



		mmc_reg: regulator@1 {

			compatible = "regulator-fixed";

			reg = <1>;

			regulator-name = "VDD_33ON_2.8V";

			regulator-min-microvolt = <2800000>;

			regulator-max-microvolt = <2800000>;

			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;

			enable-active-high;

		};



		reg_hdmi_en: regulator@2 {

			compatible = "regulator-fixed";

			reg = <2>;

			regulator-name = "hdmi-en";

		};

	};



	fixed-rate-clocks {

		xxti {

			compatible = "samsung,clock-xxti";

			clock-frequency = <24000000>;

		};

	};



	usb_hub_bus {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		// SMSC USB3503 connected in hardware only mode as a PHY

		usb_hub: usb_hub {

			compatible = "smsc,usb3503a";



			reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;

			connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;

		};

	};

};



&dp {

	status = "okay";

	samsung,color-space = <0>;

	samsung,dynamic-range = <0>;

	samsung,ycbcr-coeff = <0>;

	samsung,color-depth = <1>;

	samsung,link-rate = <0x0a>;

	samsung,lane-count = <4>;

};



	codec@11000000 {

		samsung,mfc-r = <0x43000000 0x800000>;

		samsung,mfc-l = <0x51000000 0x800000>;

&fimd {

	status = "okay";



	display-timings {

		native-mode = <&timing0>;



		timing0: timing@0 {

			/* 2560x1600 DP panel */

			clock-frequency = <50000>;

			hactive = <2560>;

			vactive = <1600>;

			hfront-porch = <48>;

			hback-porch = <80>;

			hsync-len = <32>;

			vback-porch = <16>;

			vfront-porch = <8>;

			vsync-len = <6>;

		};

	};

};



	i2c@12C60000 {

&hdmi {

	hpd-gpio = <&gpx3 7 2>;

	vdd_osc-supply = <&ldo10_reg>;

	vdd_pll-supply = <&ldo8_reg>;

	vdd-supply = <&ldo8_reg>;

};



&i2c_0 {

	status = "okay";

	samsung,i2c-sda-delay = <100>;

	samsung,i2c-max-bus-freq = <20000>;

	samsung,i2c-slave-addr = <0x66>;

		status = "okay";



	s5m8767_pmic@66 {

		compatible = "samsung,s5m8767-pmic";
@@ -70,12 +196,13 @@ 
		s5m8767,pmic-buck2-dvs-voltage = <1300000>;

		s5m8767,pmic-buck3-dvs-voltage = <1100000>;

		s5m8767,pmic-buck4-dvs-voltage = <1200000>;

			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,

							<&gpd1 1 0>,

							<&gpd1 2 0>;

			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,

							<&gpx2 4 0>,

							<&gpx2 5 0>;

		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,

		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,

		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;

		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,

		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,

		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;



		regulators {

			ldo1_reg: LDO1 {

				regulator-name = "VDD_ALIVE_1.0V";
@@ -329,7 +456,7 @@ 
	};

};



	i2c@12C80000 {

&i2c_2 {

	status = "okay";



	samsung,i2c-sda-delay = <100>;
@@ -342,11 +469,10 @@ 
	};

};



	i2c@12C90000 {

&i2c_3 {

	status = "okay";



	wm1811a@1a {



		compatible = "wlf,wm1811";

		reg = <0x1a>;
@@ -359,12 +485,12 @@ 
		SPKVDD1-supply = <&main_dc_reg>;

		SPKVDD2-supply = <&main_dc_reg>;



			wlf,ldo1ena = <&gpb0 0 0>;

			wlf,ldo2ena = <&gpb0 1 0>;

		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;

		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;

	};

};



	i2c@12CE0000 {

&i2c_8 {

	status = "okay";



	samsung,i2c-sda-delay = <100>;
@@ -377,7 +503,7 @@ 
	};

};



	i2c@121D0000 {

&i2c_9 {

	status = "okay";

	samsung,i2c-sda-delay = <100>;

	samsung,i2c-max-bus-freq = <40000>;
@@ -389,16 +515,16 @@ 
	};

};



	sata@122F0000 {

&i2s0 {

	status = "okay";

};



	sata-phy@12170000 {

		status = "okay";

		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;

&mfc {

	samsung,mfc-r = <0x43000000 0x800000>;

	samsung,mfc-l = <0x51000000 0x800000>;

};



	mmc_0: mmc@12200000 {

&mmc_0 {

	status = "okay";

	num-slots = <1>;

	broken-cd;
@@ -413,7 +539,7 @@ 
	cap-mmc-highspeed;

};



	mmc_2: mmc@12220000 {

&mmc_2 {

	status = "okay";

	num-slots = <1>;

	card-detect-delay = <200>;
@@ -428,138 +554,15 @@ 
	cap-sd-highspeed;

};



	i2s0: i2s@03830000 {

&rtc {

	status = "okay";

};



	gpio_keys {

		compatible = "gpio-keys";



		menu {

			label = "SW-TACT2";

			gpios = <&gpx1 4 1>;

			linux,code = <KEY_MENU>;

			gpio-key,wakeup;

		};



		home {

			label = "SW-TACT3";

			gpios = <&gpx1 5 1>;

			linux,code = <KEY_HOME>;

			gpio-key,wakeup;

		};



		up {

			label = "SW-TACT4";

			gpios = <&gpx1 6 1>;

			linux,code = <KEY_UP>;

			gpio-key,wakeup;

		};



		down {

			label = "SW-TACT5";

			gpios = <&gpx1 7 1>;

			linux,code = <KEY_DOWN>;

			gpio-key,wakeup;

		};



		back {

			label = "SW-TACT6";

			gpios = <&gpx2 0 1>;

			linux,code = <KEY_BACK>;

			gpio-key,wakeup;

		};



		wakeup {

			label = "SW-TACT7";

			gpios = <&gpx2 1 1>;

			linux,code = <KEY_WAKEUP>;

			gpio-key,wakeup;

		};

	};



	hdmi {

		hpd-gpio = <&gpx3 7 2>;

		vdd_osc-supply = <&ldo10_reg>;

		vdd_pll-supply = <&ldo8_reg>;

		vdd-supply = <&ldo8_reg>;

	};



	regulators {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		main_dc_reg: regulator@0 {

			compatible = "regulator-fixed";

			reg = <0>;

			regulator-name = "MAIN_DC";

		};



		mmc_reg: regulator@1 {

			compatible = "regulator-fixed";

			reg = <1>;

			regulator-name = "VDD_33ON_2.8V";

			regulator-min-microvolt = <2800000>;

			regulator-max-microvolt = <2800000>;

			gpio = <&gpx1 1 1>;

			enable-active-high;

		};



		reg_hdmi_en: regulator@2 {

			compatible = "regulator-fixed";

			reg = <2>;

			regulator-name = "hdmi-en";

		};

	};



	fixed-rate-clocks {

		xxti {

			compatible = "samsung,clock-xxti";

			clock-frequency = <24000000>;

		};

	};



	dp-controller@145B0000 {

		samsung,color-space = <0>;

		samsung,dynamic-range = <0>;

		samsung,ycbcr-coeff = <0>;

		samsung,color-depth = <1>;

		samsung,link-rate = <0x0a>;

		samsung,lane-count = <4>;

&sata {

	status = "okay";

};



	fimd: fimd@14400000 {

&sata_phy {

	status = "okay";

		display-timings {

			native-mode = <&timing0>;

			timing0: timing@0 {

				/* 2560x1600 DP panel */

				clock-frequency = <50000>;

				hactive = <2560>;

				vactive = <1600>;

				hfront-porch = <48>;

				hback-porch = <80>;

				hsync-len = <32>;

				vback-porch = <16>;

				vfront-porch = <8>;

				vsync-len = <6>;

			};

		};

	};



	usb_hub_bus {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		// SMSC USB3503 connected in hardware only mode as a PHY

		usb_hub: usb_hub {

			compatible = "smsc,usb3503a";



			reset-gpios = <&gpx3 5 1>;

			connect-gpios = <&gpd1 7 1>;

		};

	};

	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE