Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码，可以自行至设置中更改；如有其他问题，请发邮件至 service@cra.moe 寻求协助。

Commit c65f2abf authored Mar 30, 2012 by Rob Herring

ARM: remove ixp23xx and ixp2000 platforms



ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>

parent dd775ae2

Documentation/arm/00-INDEX

+0 −2

Original line number	Diff line number	Diff line
		@@ -4,8 +4,6 @@ Booting
		- requirements for booting
		Interrupts
		- ARM Interrupt subsystem documentation
		IXP2000
		- Release Notes for Linux on Intel's IXP2000 Network Processor
		msm
		- MSM specific documentation
		Netwinder

Documentation/arm/IXP2000

deleted100644 → 0

+0 −69

Original line number	Diff line number	Diff line

		-------------------------------------------------------------------------
		Release Notes for Linux on Intel's IXP2000 Network Processor

		Maintained by Deepak Saxena <dsaxena@plexity.net>
		-------------------------------------------------------------------------

		1. Overview

		Intel's IXP2000 family of NPUs (IXP2400, IXP2800, IXP2850) is designed
		for high-performance network applications such high-availability
		telecom systems. In addition to an XScale core, it contains up to 8
		"MicroEngines" that run special code, several high-end networking
		interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
		flash interface, and some other odds and ends. For more information, see:

		http://developer.intel.com

		2. Linux Support

		Linux currently supports the following features on the IXP2000 NPUs:

		- On-chip serial
		- PCI
		- Flash (MTD/JFFS2)
		- I2C through GPIO
		- Timers (watchdog, OS)

		That is about all we can support under Linux ATM b/c the core networking
		components of the chip are accessed via Intel's closed source SDK.
		Please contact Intel directly on issues with using those. There is
		also a mailing list run by some folks at Princeton University that might
		be of help: https://lists.cs.princeton.edu/mailman/listinfo/ixp2xxx

		WHATEVER YOU DO, DO NOT POST EMAIL TO THE LINUX-ARM OR LINUX-ARM-KERNEL
		MAILING LISTS REGARDING THE INTEL SDK.

		3. Supported Platforms

		- Intel IXDP2400 Reference Platform
		- Intel IXDP2800 Reference Platform
		- Intel IXDP2401 Reference Platform
		- Intel IXDP2801 Reference Platform
		- RadiSys ENP-2611

		4. Usage Notes

		- The IXP2000 platforms usually have rather complex PCI bus topologies
		with large memory space requirements. In addition, b/c of the way the
		Intel SDK is designed, devices are enumerated in a very specific
		way. B/c of this this, we use "pci=firmware" option in the kernel
		command line so that we do not re-enumerate the bus.

		- IXDP2x01 systems have variable clock tick rates that we cannot determine
		via HW registers. The "ixdp2x01_clk=XXX" cmd line options allow you
		to pass the clock rate to the board port.

		5. Thanks

		The IXP2000 work has been funded by Intel Corp. and MontaVista Software, Inc.

		The following people have contributed patches/comments/etc:

		Naeem F. Afzal
		Lennert Buytenhek
		Jeffrey Daly

		-------------------------------------------------------------------------
		Last Update: 8/09/2004

MAINTAINERS

+0 −17

Original line number	Diff line number	Diff line
		@@ -640,13 +640,6 @@ S: Maintained
		F: drivers/amba/
		F: include/linux/amba/bus.h

		ARM/ADI ROADRUNNER MACHINE SUPPORT
		M: Lennert Buytenhek <kernel@wantstofly.org>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		S: Maintained
		F: arch/arm/mach-ixp23xx/
		F: arch/arm/mach-ixp23xx/include/mach/

		ARM/ADS SPHERE MACHINE SUPPORT
		M: Lennert Buytenhek <kernel@wantstofly.org>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		@@ -859,21 +852,11 @@ M: Dan Williams <dan.j.williams@intel.com>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		S: Maintained

		ARM/INTEL IXP2000 ARM ARCHITECTURE
		M: Lennert Buytenhek <kernel@wantstofly.org>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		S: Maintained

		ARM/INTEL IXDP2850 MACHINE SUPPORT
		M: Lennert Buytenhek <kernel@wantstofly.org>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		S: Maintained

		ARM/INTEL IXP23XX ARM ARCHITECTURE
		M: Lennert Buytenhek <kernel@wantstofly.org>
		L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
		S: Maintained

		ARM/INTEL IXP4XX ARM ARCHITECTURE
		M: Imre Kaloz <kaloz@openwrt.org>
		M: Krzysztof Halasa <khc@pm.waw.pl>

arch/arm/Kconfig

+0 −26

Original line number	Diff line number	Diff line
		@@ -527,28 +527,6 @@ config ARCH_IOP33X
		help
		Support for Intel's IOP33X (XScale) family of processors.

		config ARCH_IXP23XX
		bool "IXP23XX-based"
		depends on MMU
		select CPU_XSC3
		select PCI
		select ARCH_USES_GETTIMEOFFSET
		select NEED_MACH_IO_H
		select NEED_MACH_MEMORY_H
		help
		Support for Intel's IXP23xx (XScale) family of processors.

		config ARCH_IXP2000
		bool "IXP2400/2800-based"
		depends on MMU
		select CPU_XSCALE
		select PCI
		select ARCH_USES_GETTIMEOFFSET
		select NEED_MACH_IO_H
		select NEED_MACH_MEMORY_H
		help
		Support for Intel's IXP2400/2800 (XScale) family of processors.

		config ARCH_IXP4XX
		bool "IXP4xx-based"
		depends on MMU
		@@ -1045,10 +1023,6 @@ source "arch/arm/mach-iop13xx/Kconfig"

		source "arch/arm/mach-ixp4xx/Kconfig"

		source "arch/arm/mach-ixp2000/Kconfig"

		source "arch/arm/mach-ixp23xx/Kconfig"

		source "arch/arm/mach-kirkwood/Kconfig"

		source "arch/arm/mach-ks8695/Kconfig"

arch/arm/Makefile

+0 −2

Original line number	Diff line number	Diff line
		@@ -149,8 +149,6 @@ machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
		machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
		machine-$(CONFIG_ARCH_IOP32X) := iop32x
		machine-$(CONFIG_ARCH_IOP33X) := iop33x
		machine-$(CONFIG_ARCH_IXP2000) := ixp2000
		machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
		machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
		machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
		machine-$(CONFIG_ARCH_KS8695) := ks8695

CRA Git | Maintained and supported by SUSTech CRA and CCSE