Commit c4825256 authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: dts: Add basic support for zoom3 



I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.

Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 5992234b

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -178,6 +178,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ 
	omap3-gta04.dtb \

	omap3-igep0020.dtb \

	omap3-igep0030.dtb \

	omap3-zoom3.dtb \

	omap4-panda.dtb \

	omap4-panda-a4.dtb \

	omap4-panda-es.dtb \

arch/arm/boot/dts/omap-zoom-common.dtsi

0 → 100644
+33 −0
Original line number Diff line number Diff line 
/*

 * Common features on the Zoom debug board

 */



#include "omap-gpmc-smsc911x.dtsi"



&gpmc {

	ranges = <3 0 0x10000000 0x00000400>,

		 <7 0 0x2c000000 0x01000000>;



	/*

	 * Four port TL16CP754C serial port on GPMC,

	 * they probably share the same GPIO IRQ

	 * REVISIT: Add timing support from slls644g.pdf

	 */

	8250@3,0 {

		compatible = "ns16550a";

		reg = <3 0 0x100>;

		bank-width = <2>;

		reg-shift = <1>;

		reg-io-width = <1>;

		interrupt-parent = <&gpio4>;

		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */

		clock-frequency = <1843200>;

		current-speed = <115200>;

	};



	ethernet@gpmc {

		reg = <7 0 0xff>;

		interrupt-parent = <&gpio5>;

		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */

	};

};

arch/arm/boot/dts/omap3-zoom3.dts

0 → 100644
+217 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

/dts-v1/;



#include "omap36xx.dtsi"

#include "omap-zoom-common.dtsi"



/ {

	model = "TI Zoom3";

	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";



	cpus {

		cpu@0 {

			cpu0-supply = <&vcc>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x80000000 0x20000000>; /* 512 MB */

	};



	vddvario: regulator-vddvario {

		  compatible = "regulator-fixed";

		  regulator-name = "vddvario";

		  regulator-always-on;

	};



	vdd33a: regulator-vdd33a {

		compatible = "regulator-fixed";

		regulator-name = "vdd33a";

		regulator-always-on;

	};



	wl12xx_vmmc: wl12xx_vmmc {

		pinctrl-names = "default";

		pinctrl-0 = <&wl12xx_gpio>;

		compatible = "regulator-fixed";

		regulator-name = "vwl1271";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&gpio4 5 0>;	/* gpio101 */

		startup-delay-us = <70000>;

		enable-active-high;

	};

};



&omap3_pmx_core {

	/* REVISIT: twl gpio0 is mmc0_cd */

	mmc1_pins: pinmux_mmc1_pins {

		pinctrl-single,pins = <

			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */

			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */

			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */

			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */

			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */

			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */

		>;

	};



	mmc2_pins: pinmux_mmc2_pins {

		pinctrl-single,pins = <

			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */

			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */

			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */

			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */

			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */

			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */

			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */

			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */

			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */

			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */

		>;

	};



	mmc3_pins: pinmux_mmc3_pins {

		pinctrl-single,pins = <

			0x168 (PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */

			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */

			0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */

			0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */

			0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */

			0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */

			0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */

		>;

	};



	uart1_pins: pinmux_uart1_pins {

		pinctrl-single,pins = <

                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */

                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */

                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */

                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */

		>;

	};



	uart2_pins: pinmux_uart2_pins {

		pinctrl-single,pins = <

                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */

                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */

                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */

                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */

		>;

	};



	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */

                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */

                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */

                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */

		>;

	};



	/* wl12xx GPIO output for WLAN_EN */

	wl12xx_gpio: pinmux_wl12xx_gpio {

		pinctrl-single,pins = <

			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */

		>;

	};

};



&omap3_pmx_wkup {

	wlan_host_wkup: pinmux_wlan_host_wkup_pins {

		pinctrl-single,pins = <

			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */

		>;

	};

};



&i2c1 {

	clock-frequency = <2600000>;



	twl: twl@48 {

		reg = <0x48>;

		interrupts = <7>; /* SYS_NIRQ cascaded to intc */

		interrupt-parent = <&intc>;

	};

};



#include "twl4030.dtsi"



&i2c2 {

	clock-frequency = <400000>;

};



&i2c3 {

	clock-frequency = <400000>;



	/*

	 * TVP5146 Video decoder-in for analog input support.

	 */

	tvp5146@5c {

		compatible = "ti,tvp5146m2";

		reg = <0x5c>;

	};

};



&twl_gpio {

	ti,use-leds;

};



&mmc1 {

	vmmc-supply = <&vmmc1>;

	vmmc_aux-supply = <&vsim>;

	bus-width = <4>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins>;

};

/*

&mmc2 {

	vmmc-supply = <&vmmc2>;

	ti,non-removable;

	bus-width = <8>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins>;

};

*/

&mmc3 {

	vmmc-supply = <&wl12xx_vmmc>;

	non-removable;

	bus-width = <4>;

	cap-power-off-card;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins>;

};



&uart1 {

       pinctrl-names = "default";

       pinctrl-0 = <&uart1_pins>;

};



&uart2 {

       pinctrl-names = "default";

       pinctrl-0 = <&uart2_pins>;

};



&uart3 {

       pinctrl-names = "default";

       pinctrl-0 = <&uart3_pins>;

};



&uart4 {

       status = "disabled";

};



&usb_otg_hs {

	interface-type = <0>;

	usb-phy = <&usb2_phy>;

	mode = <3>;

	power = <50>;

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE