Commit c3dc4c09 authored by Don Skidmore's avatar Don Skidmore Committed by Jeff Kirsher
Browse files

ixgbe: add X550 support for external PHY and forced 1G/10G support 



This patch adds x550 external PHY interrupt and forced 1G/10G support.
This included enabling and handling LSC and thermal sensor interrupt.
ixgbe_handle_lasi() has been added for handling the interrupts received
over SDP0 from the external 10baseT PHY. ixgbe_enable_lasi_ext_t_x550em
and ixgbe_get_lasi_ext_t_x550em have been added to X550em to enable
mask and check interrupt flags for the external PHY.

Forced 1G/10G link speed is handled via ixgbe_mac_link_t_X550em.
ixgbe_seupt_mac_link_t_X550em sets up the internal PHY and external PHY
to either iXFI (10G) or KX (1G) based on the user selected auto
advertised link speed setting. Then sets up the external PHY auto
advertised link speed.

Signed-off-by: default avatarDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: default avatarKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent ab5fe0c5

drivers/net/ethernet/intel/ixgbe/ixgbe_type.h

+21 −0
Original line number Diff line number Diff line
@@ -1305,6 +1305,8 @@ struct ixgbe_thermal_sensor_data { 
#define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */

#define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */

#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */

#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */

#define IXGBE_MDIO_AUTO_NEG_VEN_LSC	0x1 /* AUTO_NEG Vendor Tx LSC */

#define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */

#define IXGBE_MDIO_AUTO_NEG_LP		0x13 /* AUTO_NEG LP Status Reg */

#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
@@ -1315,10 +1317,25 @@ struct ixgbe_thermal_sensor_data { 
#define IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK 0x3 /* PHY Reset Complete Mask */

#define IXGBE_MDIO_GLOBAL_RES_PR_10 0xC479 /* Global Resv Provisioning 10 Reg */

#define IXGBE_MDIO_POWER_UP_STALL	0x8000 /* Power Up Stall */

#define IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK	0xFF00 /* int std mask */

#define IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG	0xFC00 /* chip std int flag */

#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK	0xFF01 /* int chip-wide mask */

#define IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG	0xFC01 /* int chip-wide mask */

#define IXGBE_MDIO_GLOBAL_ALARM_1		0xCC00 /* Global alarm 1 */

#define IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL	0x4000 /* high temp failure */

#define IXGBE_MDIO_GLOBAL_INT_MASK		0xD400 /* Global int mask */

/* autoneg vendor alarm int enable */

#define IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN	0x1000

#define IXGBE_MDIO_GLOBAL_ALARM_1_INT		0x4 /* int in Global alarm 1 */

#define IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN	0x1 /* vendor alarm int enable */

#define IXGBE_MDIO_GLOBAL_STD_ALM2_INT		0x200 /* vendor alarm2 int mask */

#define IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN	0x4000 /* int high temp enable */



#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR	0xC30A /* PHY_XS SDA/SCL Addr Reg */

#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA	0xC30B /* PHY_XS SDA/SCL Data Reg */

#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT	0xC30C /* PHY_XS SDA/SCL Stat Reg */

#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK	0xD401 /* PHY TX Vendor LASI */

#define IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN	0x1 /* PHY TX Vendor LASI enable */

#define IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR	0x9 /* Standard Tx Dis Reg */

#define IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE	0x0001 /* PMD Global Tx Dis */
@@ -3280,6 +3297,7 @@ struct ixgbe_phy_operations { 
	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);

	s32 (*check_overtemp)(struct ixgbe_hw *);

	s32 (*set_phy_power)(struct ixgbe_hw *, bool on);

	s32 (*handle_lasi)(struct ixgbe_hw *hw);

};



struct ixgbe_eeprom_info {
@@ -3341,6 +3359,7 @@ struct ixgbe_phy_info { 
	bool                            multispeed_fiber;

	bool                            reset_if_overtemp;

	bool                            qsfp_shared_i2c_bus;

	u32				nw_mng_if_sel;

};



#include "ixgbe_mbx.h"
@@ -3509,4 +3528,6 @@ struct ixgbe_info { 
#define IXGBE_SB_IOSF_TARGET_KX4_PCS0	2

#define IXGBE_SB_IOSF_TARGET_KX4_PCS1	3



#define IXGBE_NW_MNG_IF_SEL		0x00011178

#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE	BIT(24)

#endif /* _IXGBE_TYPE_H_ */

drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

+451 −160

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE