Commit c37faafa authored by Linus Walleij's avatar Linus Walleij Committed by Ben Dooks
Browse files

i2c-stu300: I2C STU300 stability updates 



- blk clk is enabled when an irq arrives. The clk should be enabled,
  but just to make sure.
- All error bits are handled no matter state machine state
- All irq's will run complete() except for irq's that wasn't an event.
- No more looking into status registers just in case an interrupt
  has happend and the irq handle wasn't executed.
- irq_disable/enable are now separete functions.
- clk settings calculation changed to round upwards instead of
  downwards.
- Number of address send attempts before giving up is increased to 12
  from 10 since it most times take 8 tries before getting through.

Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 61149787

drivers/i2c/busses/i2c-stu300.c

+92 −65
Original line number Diff line number Diff line
@@ -117,7 +117,8 @@ enum stu300_error { 
	STU300_ERROR_NONE = 0,

	STU300_ERROR_ACKNOWLEDGE_FAILURE,

	STU300_ERROR_BUS_ERROR,

	STU300_ERROR_ARBITRATION_LOST

	STU300_ERROR_ARBITRATION_LOST,

	STU300_ERROR_UNKNOWN

};



/* timeout waiting for the controller to respond */
@@ -127,7 +128,7 @@ enum stu300_error { 
 * The number of address send athemps tried before giving up.

 * If the first one failes it seems like 5 to 8 attempts are required.

 */

#define NUM_ADDR_RESEND_ATTEMPTS 10

#define NUM_ADDR_RESEND_ATTEMPTS 12



/* I2C clock speed, in Hz 0-400kHz*/

static unsigned int scl_frequency = 100000;
@@ -149,6 +150,7 @@ module_param(scl_frequency, uint, 0644); 
 * @msg_index: index of current message

 * @msg_len: length of current message

 */



struct stu300_dev {

	struct platform_device	*pdev;

	struct i2c_adapter	adapter;
@@ -188,6 +190,27 @@ static inline u32 stu300_r8(void __iomem *address) 
	return readl(address) & 0x000000FFU;

}



static void stu300_irq_enable(struct stu300_dev *dev)

{

	u32 val;

	val = stu300_r8(dev->virtbase + I2C_CR);

	val |= I2C_CR_INTERRUPT_ENABLE;

	/* Twice paranoia (possible HW glitch) */

	stu300_wr8(val, dev->virtbase + I2C_CR);

	stu300_wr8(val, dev->virtbase + I2C_CR);

}



static void stu300_irq_disable(struct stu300_dev *dev)

{

	u32 val;

	val = stu300_r8(dev->virtbase + I2C_CR);

	val &= ~I2C_CR_INTERRUPT_ENABLE;

	/* Twice paranoia (possible HW glitch) */

	stu300_wr8(val, dev->virtbase + I2C_CR);

	stu300_wr8(val, dev->virtbase + I2C_CR);

}





/*

 * Tells whether a certain event or events occurred in

 * response to a command. The events represent states in
@@ -196,9 +219,10 @@ static inline u32 stu300_r8(void __iomem *address) 
 * documentation and can only be treated as abstract state

 * machine states.

 *

 * @ret 0 = event has not occurred, any other value means

 * the event occurred.

 * @ret 0 = event has not occurred or unknown error, any

 * other value means the correct event occurred or an error.

 */



static int stu300_event_occurred(struct stu300_dev *dev,

				   enum stu300_event mr_event) {

	u32 status1;
@@ -206,11 +230,28 @@ static int stu300_event_occurred(struct stu300_dev *dev, 


	/* What event happened? */

	status1 = stu300_r8(dev->virtbase + I2C_SR1);



	if (!(status1 & I2C_SR1_EVF_IND))

		/* No event at all */

		return 0;



	status2 = stu300_r8(dev->virtbase + I2C_SR2);



	/* Block any multiple interrupts */

	stu300_irq_disable(dev);



	/* Check for errors first */

	if (status2 & I2C_SR2_AF_IND) {

		dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;

		return 1;

	} else if (status2 & I2C_SR2_BERR_IND) {

		dev->cmd_err = STU300_ERROR_BUS_ERROR;

		return 1;

	} else if (status2 & I2C_SR2_ARLO_IND) {

		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;

		return 1;

	}



	switch (mr_event) {

	case STU300_EVENT_1:

		if (status1 & I2C_SR1_ADSL_IND)
@@ -221,10 +262,6 @@ static int stu300_event_occurred(struct stu300_dev *dev, 
	case STU300_EVENT_7:

	case STU300_EVENT_8:

		if (status1 & I2C_SR1_BTF_IND) {

			if (status2 & I2C_SR2_AF_IND)

				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;

			else if (status2 & I2C_SR2_BERR_IND)

				dev->cmd_err = STU300_ERROR_BUS_ERROR;

			return 1;

		}

		break;
@@ -240,8 +277,6 @@ static int stu300_event_occurred(struct stu300_dev *dev, 
	case STU300_EVENT_6:

		if (status2 & I2C_SR2_ENDAD_IND) {

			/* First check for any errors */

			if (status2 & I2C_SR2_AF_IND)

				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;

			return 1;

		}

		break;
@@ -252,8 +287,15 @@ static int stu300_event_occurred(struct stu300_dev *dev, 
	default:

		break;

	}

	if (status2 & I2C_SR2_ARLO_IND)

		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;

	/* If we get here, we're on thin ice.

	 * Here we are in a status where we have

	 * gotten a response that does not match

	 * what we requested.

	 */

	dev->cmd_err = STU300_ERROR_UNKNOWN;

	dev_err(&dev->pdev->dev,

		"Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n",

		mr_event, status1, status2);

	return 0;

}
@@ -262,21 +304,20 @@ static irqreturn_t stu300_irh(int irq, void *data) 
	struct stu300_dev *dev = data;

	int res;



	/* Just make sure that the block is clocked */

	clk_enable(dev->clk);



	/* See if this was what we were waiting for */

	spin_lock(&dev->cmd_issue_lock);

	if (dev->cmd_event != STU300_EVENT_NONE) {

		res = stu300_event_occurred(dev, dev->cmd_event);

		if (res || dev->cmd_err != STU300_ERROR_NONE) {

			u32 val;



	res = stu300_event_occurred(dev, dev->cmd_event);

	if (res || dev->cmd_err != STU300_ERROR_NONE)

		complete(&dev->cmd_complete);

			/* Block any multiple interrupts */

			val = stu300_r8(dev->virtbase + I2C_CR);

			val &= ~I2C_CR_INTERRUPT_ENABLE;

			stu300_wr8(val, dev->virtbase + I2C_CR);

		}

	}



	spin_unlock(&dev->cmd_issue_lock);



	clk_disable(dev->clk);



	return IRQ_HANDLED;

}
@@ -308,7 +349,6 @@ static int stu300_start_and_await_event(struct stu300_dev *dev, 
	stu300_wr8(cr_value, dev->virtbase + I2C_CR);

	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,

							STU300_TIMEOUT);



	if (ret < 0) {

		dev_err(&dev->pdev->dev,

		       "wait_for_completion_interruptible_timeout() "
@@ -342,7 +382,6 @@ static int stu300_await_event(struct stu300_dev *dev, 
				enum stu300_event mr_event)

{

	int ret;

	u32 val;



	if (unlikely(irqs_disabled())) {

		/* TODO: implement polling for this case if need be. */
@@ -354,36 +393,18 @@ static int stu300_await_event(struct stu300_dev *dev, 
	/* Is it already here? */

	spin_lock_irq(&dev->cmd_issue_lock);

	dev->cmd_err = STU300_ERROR_NONE;

	if (stu300_event_occurred(dev, mr_event)) {

		spin_unlock_irq(&dev->cmd_issue_lock);

		goto exit_await_check_err;

	}

	init_completion(&dev->cmd_complete);

	dev->cmd_err = STU300_ERROR_NONE;

	dev->cmd_event = mr_event;



	/* Turn on the I2C interrupt for current operation */

	val = stu300_r8(dev->virtbase + I2C_CR);

	val |= I2C_CR_INTERRUPT_ENABLE;

	stu300_wr8(val, dev->virtbase + I2C_CR);



	/* Twice paranoia (possible HW glitch) */

	stu300_wr8(val, dev->virtbase + I2C_CR);

	init_completion(&dev->cmd_complete);



	/* Check again: is it already here? */

	if (unlikely(stu300_event_occurred(dev, mr_event))) {

		/* Disable IRQ again. */

		val &= ~I2C_CR_INTERRUPT_ENABLE;

		stu300_wr8(val, dev->virtbase + I2C_CR);

		spin_unlock_irq(&dev->cmd_issue_lock);

		goto exit_await_check_err;

	}

	/* Turn on the I2C interrupt for current operation */

	stu300_irq_enable(dev);



	/* Unlock the command block and wait for the event to occur */

	spin_unlock_irq(&dev->cmd_issue_lock);



	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,

							STU300_TIMEOUT);



	if (ret < 0) {

		dev_err(&dev->pdev->dev,

		       "wait_for_completion_interruptible_timeout()"
@@ -401,7 +422,6 @@ static int stu300_await_event(struct stu300_dev *dev, 
		return -ETIMEDOUT;

	}



 exit_await_check_err:

	if (dev->cmd_err != STU300_ERROR_NONE) {

		if (mr_event != STU300_EVENT_6) {

			dev_err(&dev->pdev->dev, "controller "
@@ -469,6 +489,7 @@ static const struct stu300_clkset stu300_clktable[] = { 
	{ 100000000, 0xFFU },

};





static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)

{
@@ -494,10 +515,10 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) 


	if (dev->speed > 100000)

		/* Fast Mode I2C */

		val = ((clkrate/dev->speed)-9)/3;

		val = ((clkrate/dev->speed) - 9)/3 + 1;

	else

		/* Standard Mode I2C */

		val = ((clkrate/dev->speed)-7)/2;

		val = ((clkrate/dev->speed) - 7)/2 + 1;



	/* According to spec the divider must be > 2 */

	if (val < 0x002) {
@@ -557,6 +578,7 @@ static int stu300_init_hw(struct stu300_dev *dev) 
	 */

	clkrate = clk_get_rate(dev->clk);

	ret = stu300_set_clk(dev, clkrate);



	if (ret)

		return ret;

	/*
@@ -641,7 +663,6 @@ static int stu300_xfer_msg(struct i2c_adapter *adap, 
	int attempts = 0;

	struct stu300_dev *dev = i2c_get_adapdata(adap);





	clk_enable(dev->clk);



	/* Remove this if (0) to trace each and every message. */
@@ -723,6 +744,7 @@ static int stu300_xfer_msg(struct i2c_adapter *adap, 
		goto exit_disable;

	}





	if (msg->flags & I2C_M_RD) {

		/* READ: we read the actual bytes one at a time */

		for (i = 0; i < msg->len; i++) {
@@ -804,8 +826,10 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, 
{

	int ret = -1;

	int i;



	struct stu300_dev *dev = i2c_get_adapdata(adap);

	dev->msg_len = num;



	for (i = 0; i < num; i++) {

		/*

		 * Another driver appears to send stop for each message,
@@ -817,6 +841,7 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, 
		dev->msg_index = i;



		ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));



		if (ret != 0) {

			num = ret;

			break;
@@ -845,6 +870,7 @@ stu300_probe(struct platform_device *pdev) 
	struct resource *res;

	int bus_nr;

	int ret = 0;

	char clk_name[] = "I2C0";



	dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);

	if (!dev) {
@@ -854,7 +880,8 @@ stu300_probe(struct platform_device *pdev) 
	}



	bus_nr = pdev->id;

	dev->clk = clk_get(&pdev->dev, NULL);

	clk_name[3] += (char)bus_nr;

	dev->clk = clk_get(&pdev->dev, clk_name);

	if (IS_ERR(dev->clk)) {

		ret = PTR_ERR(dev->clk);

		dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");

CRA Git | Maintained and supported by SUSTech CRA and CCSE