Commit c366c76a authored by Nicolas Saenz Julienne's avatar Nicolas Saenz Julienne Committed by Linus Walleij
Browse files

gpio: add tps65218 gpio 



Driver for the GPIO block found in ti's tps65218 pmics.

The device has two GPIOs and one GPO pin which can be configured as follows:
GPIO1:
	-general-purpose, open-drain output controlled by GPO1 user bit and/or
	 sequencer
	-DDR3 reset input signal from SOC. Signal is either latched or
	 passed-trough to GPO2 pin. See below for details.
GPO2:
	-general-purpose output controlled by GPO2 user bit
	-DDR3 reset output signal. Signal is controlled by GPIO1 and PGOOD.
	 See below for details.
	-Output buffer can be configured as open-drain or push-pull.
GPIO3:
	-general-purpose, open-drain output controlled by GPO3 user bit and/or
	 sequencer
	-reset input-signal for DCDC1 and DCDC2.

The input configurations are not meant to be used by the user so the driver
only offers GPOs.

v2: Added request routine that evaluates the fw config flags and removed module
    owner
v3: Added .direction_input() routine, and took care of all Linus Walleij
suggestions (clamp to bool, use proper include)

Signed-off-by: default avatarNicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b866526d

drivers/gpio/Kconfig

+7 −0
Original line number Diff line number Diff line
@@ -889,6 +889,13 @@ config GPIO_TIMBERDALE 
	---help---

	Add support for the GPIO IP in the timberdale FPGA.



config GPIO_TPS65218

	tristate "TPS65218 GPIO"

	depends on MFD_TPS65218

	help

	  Select this option to enable GPIO driver for the TPS65218

	  chip family.



config GPIO_TPS6586X

	bool "TPS6586X GPIO"

	depends on MFD_TPS6586X

drivers/gpio/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -98,6 +98,7 @@ obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o 
obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o

obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o

obj-$(CONFIG_GPIO_TPIC2810)	+= gpio-tpic2810.o

obj-$(CONFIG_GPIO_TPS65218)	+= gpio-tps65218.o

obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o

obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o

obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o

drivers/gpio/gpio-tps65218.c

0 → 100644
+223 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Verifone Int.

 *

 * Author: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>

 *

 * This program is free software; you can redistribute it and/or modify i t

 * under  the terms of the GNU General  Public License as published by th e

 * Free Software Foundation;  either version 2 of the License, or (at you r

 * option) any later version.

 *

 * This driver is based on the gpio-tps65912 implementation.

 */



#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/errno.h>

#include <linux/gpio/driver.h>

#include <linux/platform_device.h>

#include <linux/mfd/tps65218.h>

#include "gpiolib.h"



struct tps65218_gpio {

	struct tps65218 *tps65218;

	struct gpio_chip gpio_chip;

};



static int tps65218_gpio_get(struct gpio_chip *gc, unsigned offset)

{

	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);

	struct tps65218 *tps65218 = tps65218_gpio->tps65218;

	unsigned int val;

	int ret;



	ret = tps65218_reg_read(tps65218, TPS65218_REG_ENABLE2, &val);

	if (ret)

		return ret;



	return !!(val & (TPS65218_ENABLE2_GPIO1 << offset));

}



static void tps65218_gpio_set(struct gpio_chip *gc, unsigned offset,

			      int value)

{

	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);

	struct tps65218 *tps65218 = tps65218_gpio->tps65218;



	if (value)

		tps65218_set_bits(tps65218, TPS65218_REG_ENABLE2,

				  TPS65218_ENABLE2_GPIO1 << offset,

				  TPS65218_ENABLE2_GPIO1 << offset,

				  TPS65218_PROTECT_L1);

	else

		tps65218_clear_bits(tps65218, TPS65218_REG_ENABLE2,

				    TPS65218_ENABLE2_GPIO1 << offset,

				    TPS65218_PROTECT_L1);

}



static int tps65218_gpio_output(struct gpio_chip *gc, unsigned offset,

				int value)

{

	/* Only drives GPOs */

	return 0;

}



static int tps65218_gpio_input(struct gpio_chip *gc, unsigned offset)

{

	return -EPERM;

}



static int tps65218_gpio_request(struct gpio_chip *gc, unsigned offset)

{

	struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);

	struct tps65218 *tps65218 = tps65218_gpio->tps65218;

	unsigned long flags = gc->desc[offset].flags;

	int ret;



	if (flags & FLAG_OPEN_SOURCE) {

		dev_err(gc->parent, "can't work as open source\n");

		return -EINVAL;

	}



	switch (offset) {

	case 0:

		if (!(flags & FLAG_OPEN_DRAIN)) {

			dev_err(gc->parent, "GPO1 works only as open drain\n");

			return -EINVAL;

		}



		/* Disable sequencer for GPO1 */

		ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,

					  TPS65218_SEQ7_GPO1_SEQ_MASK,

					  TPS65218_PROTECT_L1);

		if (ret)

			return ret;



		/* Setup GPO1 */

		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,

					  TPS65218_CONFIG1_IO1_SEL,

					  TPS65218_PROTECT_L1);

		if (ret)

			return ret;



		break;

	case 1:

		/* GP02 is push-pull by default, can be set as open drain. */

		if (flags & FLAG_OPEN_DRAIN) {

			ret = tps65218_clear_bits(tps65218,

						  TPS65218_REG_CONFIG1,

						  TPS65218_CONFIG1_GPO2_BUF,

						  TPS65218_PROTECT_L1);

			if (ret)

				return ret;

		}



		/* Setup GPO2 */

		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,

					  TPS65218_CONFIG1_IO1_SEL,

					  TPS65218_PROTECT_L1);

		if (ret)

			return ret;



		break;



	case 2:

		if (!(flags & FLAG_OPEN_DRAIN)) {

			dev_err(gc->parent, "GPO3 works only as open drain\n");

			return -EINVAL;

		}



		/* Disable sequencer for GPO3 */

		ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,

					  TPS65218_SEQ7_GPO3_SEQ_MASK,

					  TPS65218_PROTECT_L1);

		if (ret)

			return ret;



		/* Setup GPO3 */

		ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG2,

					  TPS65218_CONFIG2_DC12_RST,

					  TPS65218_PROTECT_L1);

		if (ret)

			return ret;



		break;

	default:

		return -EINVAL;

	}



	return 0;

}



static struct gpio_chip template_chip = {

	.label			= "gpio-tps65218",

	.owner			= THIS_MODULE,

	.request		= tps65218_gpio_request,

	.direction_output	= tps65218_gpio_output,

	.direction_input	= tps65218_gpio_input,

	.get			= tps65218_gpio_get,

	.set			= tps65218_gpio_set,

	.can_sleep		= true,

	.ngpio			= 3,

	.base			= -1,

};



static int tps65218_gpio_probe(struct platform_device *pdev)

{

	struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent);

	struct tps65218_gpio *tps65218_gpio;

	int ret;



	tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio),

				     GFP_KERNEL);

	if (!tps65218_gpio)

		return -ENOMEM;



	tps65218_gpio->tps65218 = tps65218;

	tps65218_gpio->gpio_chip = template_chip;

	tps65218_gpio->gpio_chip.parent = &pdev->dev;

#ifdef CONFIG_OF_GPIO

	tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node;

#endif



	ret = gpiochip_add_data(&tps65218_gpio->gpio_chip, tps65218_gpio);

	if (ret < 0) {

		dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret);

		return ret;

	}



	platform_set_drvdata(pdev, tps65218_gpio);



	return ret;

}



static int tps65218_gpio_remove(struct platform_device *pdev)

{

	struct tps65218_gpio *tps65218_gpio = platform_get_drvdata(pdev);



	gpiochip_remove(&tps65218_gpio->gpio_chip);



	return 0;

}



static const struct of_device_id tps65218_dt_match[] = {

	{ .compatible = "ti,tps65218-gpio" },

	{  }

};

MODULE_DEVICE_TABLE(of, tps65218_dt_match);



static struct platform_driver tps65218_gpio_driver = {

	.driver = {

		.name = "tps65218-gpio",

		.of_match_table = of_match_ptr(tps65218_dt_match)

	},

	.probe = tps65218_gpio_probe,

	.remove = tps65218_gpio_remove,

};



module_platform_driver(tps65218_gpio_driver);



MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");

MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs");

MODULE_LICENSE("GPL v2");

MODULE_ALIAS("platform:tps65218-gpio");

CRA Git | Maintained and supported by SUSTech CRA and CCSE