ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board

	sun6i-a31-m9.dtb \

	sun6i-a31-mele-a1000g-quad.dtb \

	sun6i-a31s-cs908.dtb \

	sun6i-a31s-sinovoip-bpi-m2.dtb \

	sun6i-a31s-yones-toptech-bs1078-v2.dtb

dtb-$(CONFIG_MACH_SUN7I) += \

	sun7i-a20-bananapi.dtb \

/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This library is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This library is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun6i-a31s.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {

	model = "Sinovoip BPI-M2";

	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";

	aliases {

		serial0 = &uart0;

	};

	chosen {

		stdout-path = "serial0:115200n8";

	};

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_bpi_m2>;

		blue {

			label = "bpi-m2:blue:usr";

			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */

		};

		green {

			label = "bpi-m2:green:usr";

			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */

		};

		red {

			label = "bpi-m2:red:usr";

			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */

		};

	};

	mmc2_pwrseq: mmc2_pwrseq {

		compatible = "mmc-pwrseq-simple";

		pinctrl-names = "default";

		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;

		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */

	};

};

&ehci0 {

	status = "okay";

};

&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;

	phy = <&phy1>;

	phy-mode = "rgmii";

	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */

	snps,reset-active-low;

	snps,reset-delays-us = <0 10000 30000>;

	status = "okay";

	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};

&ir {

	pinctrl-names = "default";

	pinctrl-0 = <&ir_pins_a>;

	status = "okay";

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;

	vmmc-supply = <&reg_vcc3v0>;

	bus-width = <4>;

	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */

	cd-inverted;

	status = "okay";

};

&mmc0_pins_a {

	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins_a>;

	vmmc-supply = <&reg_vcc3v0>;

	mmc-pwrseq = <&mmc2_pwrseq>;

	bus-width = <4>;

	non-removable;

	status = "okay";

	brcmf: bcrmf@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

		interrupt-parent = <&r_pio>;

		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */

		interrupt-names = "host-wake";

	};

};

&mmc2_pins_a {

	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

&ohci0 {

	status = "okay";

};

&pio {

	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {

		allwinner,pins = "PA21";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

	led_pins_bpi_m2: led_pins@0 {

		allwinner,pins = "PG5", "PG10", "PG11";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {

		allwinner,pins = "PA4";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

};

&r_pio {

	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {

		allwinner,pins = "PL8";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};

&usbphy {

	status = "okay";

};