Merge tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

		1 = edge triggered

		4 = level triggered

  Cells 4 and beyond are reserved for future use. When the 1st cell

  has a value of 0 or 1, cells 4 and beyond act as padding, and may be

  ignored. It is recommended that padding cells have a value of 0.

  Cells 4 and beyond are reserved for future use and must have a value

  of 0 if present.

- reg : Specifies base physical address(s) and size of the GIC

  registers, in the following order:

  interrupt number is the rtc alarm interrupt and second interrupt number

  is the rtc tick interrupt. The number of cells representing a interrupt

  depends on the parent interrupt controller.

- clocks: Must contain a list of phandle and clock specifier for the rtc

          and source clocks.

- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the

               same order as the clocks property.

Example:

		compatible = "samsung,s3c6410-rtc";

		reg = <0x10070000 0x100>;

		interrupts = <44 0 45 0>;

		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;

		clock-names = "rtc", "rtc_src";

	};

- fsl,uart-has-rtscts : Indicate the uart has rts and cts

- fsl,irda-mode : Indicate the uart supports irda mode

- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works

                  is DCE mode by default.

                  in DCE mode by default.

Note: Each uart controller should have an alias correctly numbered

in "aliases" node.

		msi_base = be32_to_cpup(msi_map + 2);

		rid_len = be32_to_cpup(msi_map + 3);

		if (rid_base & ~map_mask) {

			dev_err(parent_dev,

				"Invalid msi-map translation - msi-map-mask (0x%x) ignores rid-base (0x%x)\n",

				map_mask, rid_base);

			return rid_out;

		}

		msi_controller_node = of_find_node_by_phandle(phandle);

		matched = (masked_rid >= rid_base &&

	if (!matched)

		return rid_out;

	rid_out = masked_rid + msi_base;

	rid_out = masked_rid - rid_base + msi_base;

	dev_dbg(dev,

		"msi-map at: %s, using mask %08x, rid-base: %08x, msi-base: %08x, length: %08x, rid: %08x -> %08x\n",

		dev_name(parent_dev), map_mask, rid_base, msi_base,