Commit c220aec2 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: dts: sun6i: Add Merrii A31 Hummingbird support 

This adds support for the A31 Hummingbird:
http://www.merrii.com/en/pla_d.asp?id=172



The Merrii A31 Hummingbird is a development board based on the
Allwinner A31 SoC with multiple USB ports through a USB hub chip,
a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip,
TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers.

Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub;
 add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups;
 correct ethernet phy address to 0x01; drop uart2 (BT chip has
 no power) and uart3 (no device); use proper commit message]
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
parent e5073fde

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ 
dtb-$(CONFIG_MACH_SUN6I) += \

	sun6i-a31-app4-evb1.dtb \

	sun6i-a31-colombus.dtb \

	sun6i-a31-hummingbird.dtb \

	sun6i-a31-m9.dtb

dtb-$(CONFIG_MACH_SUN7I) += \

	sun7i-a20-cubieboard2.dtb \

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

0 → 100644
+119 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 Maxime Ripard

 *

 * Maxime Ripard <maxime.ripard@free-electrons.com>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

/include/ "sun6i-a31.dtsi"

/include/ "sunxi-common-regulators.dtsi"



/ {

	model = "Merrii A31 Hummingbird";

	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";



	chosen {

		bootargs = "earlyprintk console=ttyS0,115200";

	};



	soc@01c00000 {

		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;

			vmmc-supply = <&reg_vcc3v0>;

			bus-width = <4>;

			cd-gpios = <&pio 0 8 0>; /* PA8 */

			cd-inverted;

			status = "okay";

		};



		usbphy: phy@01c19400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			status = "okay";

		};



		ehci0: usb@01c1a000 {

			status = "okay";

		};



		ohci0: usb@01c1a400 {

			status = "okay";

		};



		pio: pinctrl@01c20800 {

			mmc0_pins_a: mmc0@0 {

				/* external pull-ups missing for some pins */

				allwinner,pull = <1>;

			};



			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {

				allwinner,pins = "PA8";

				allwinner,function = "gpio_in";

				allwinner,drive = <0>;

				allwinner,pull = <1>;

			};



			usb1_vbus_pin_a: usb1_vbus_pin@0 {

				allwinner,pins = "PH24";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

			/* pull-ups and devices require AXP221 DLDO3 */

			status = "failed";

		};



		i2c1: i2c@01c2b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c1_pins_a>;

			status = "okay";

		};



		i2c2: i2c@01c2b400 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c2_pins_a>;

			status = "okay";



			pcf8563: rtc@51 {

				compatible = "nxp,pcf8563";

				reg = <0x51>;

			};

		};



		gmac: ethernet@01c30000 {

			pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_rgmii_a>;

			phy = <&phy1>;

			phy-mode = "rgmii";

			status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

	};



	reg_usb1_vbus: usb1-vbus {

		pinctrl-0 = <&usb1_vbus_pin_a>;

		gpio = <&pio 7 24 0>; /* PH24 */

		status = "okay";

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE