Commit c12abc01 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Mark Brown
Browse files

ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of omap_mcbsp_start/stop 



Simultaneous audio playback and capture on OMAP1510 can cause that second
stream is stalled if there is enough delay between startup of the audio
streams.

Current implementation of the omap_mcbsp_start is starting both transmitter
and receiver at the same time and it is called only for firstly started
audio stream from the OMAP McBSP based ASoC DAI driver.

Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is
missed if there is no DMA transfer set up at that time when the first word
after McBSP startup is transmitted. The problem hasn't noted before since
later OMAPs are using level sensitive DMA request lines.

Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by
allowing to start and stop individually McBSP transmitter and receiver
logics. Then call those functions individually for both audio playback
and capture streams. This ensures that DMA transfer is setup before
transmitter or receiver is started.

Thanks to Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for detailed problem
analysis and Peter Ujfalusi <peter.ujfalusi@nokia.com> for info about DMA
request line behavior differences between the OMAP generations.

Reported-and-tested-by: default avatarJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: default avatarJarkko Nikula <jhnikula@gmail.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 06c71282

arch/arm/plat-omap/include/mach/mcbsp.h

+2 −2
Original line number Diff line number Diff line
@@ -387,8 +387,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, 
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);

int omap_mcbsp_request(unsigned int id);

void omap_mcbsp_free(unsigned int id);

void omap_mcbsp_start(unsigned int id);

void omap_mcbsp_stop(unsigned int id);

void omap_mcbsp_start(unsigned int id, int tx, int rx);

void omap_mcbsp_stop(unsigned int id, int tx, int rx);

void omap_mcbsp_xmit_word(unsigned int id, u32 word);

u32 omap_mcbsp_recv_word(unsigned int id);

arch/arm/plat-omap/mcbsp.c

+32 −18
Original line number Diff line number Diff line
@@ -328,14 +328,15 @@ void omap_mcbsp_free(unsigned int id) 
EXPORT_SYMBOL(omap_mcbsp_free);



/*

 * Here we start the McBSP, by enabling the sample

 * generator, both transmitter and receivers,

 * and the frame sync.

 * Here we start the McBSP, by enabling transmitter, receiver or both.

 * If no transmitter or receiver is active prior calling, then sample-rate

 * generator and frame sync are started.

 */

void omap_mcbsp_start(unsigned int id)

void omap_mcbsp_start(unsigned int id, int tx, int rx)

{

	struct omap_mcbsp *mcbsp;

	void __iomem *io_base;

	int idle;

	u16 w;



	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +349,40 @@ void omap_mcbsp_start(unsigned int id) 
	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;

	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;



	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |

		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);



	if (idle) {

		/* Start the sample generator */

		w = OMAP_MCBSP_READ(io_base, SPCR2);

		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));

	}



	/* Enable transmitter and receiver */

	w = OMAP_MCBSP_READ(io_base, SPCR2);

	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);

	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));



	w = OMAP_MCBSP_READ(io_base, SPCR1);

	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);

	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));



	udelay(100);



	if (idle) {

		/* Start frame sync */

		w = OMAP_MCBSP_READ(io_base, SPCR2);

		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));

	}



	/* Dump McBSP Regs */

	omap_mcbsp_dump_reg(id);

}

EXPORT_SYMBOL(omap_mcbsp_start);



void omap_mcbsp_stop(unsigned int id)

void omap_mcbsp_stop(unsigned int id, int tx, int rx)

{

	struct omap_mcbsp *mcbsp;

	void __iomem *io_base;

	int idle;

	u16 w;



	if (!omap_mcbsp_check_valid_id(id)) {
@@ -386,16 +395,21 @@ void omap_mcbsp_stop(unsigned int id) 


	/* Reset transmitter */

	w = OMAP_MCBSP_READ(io_base, SPCR2);

	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));

	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));



	/* Reset receiver */

	w = OMAP_MCBSP_READ(io_base, SPCR1);

	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));

	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));



	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |

		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);



	if (idle) {

		/* Reset the sample rate generator */

		w = OMAP_MCBSP_READ(io_base, SPCR2);

		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));

	}

}

EXPORT_SYMBOL(omap_mcbsp_stop);



/* polled mcbsp i/o operations */

sound/soc/omap/omap-mcbsp.c

+5 −5
Original line number Diff line number Diff line
@@ -183,21 +183,21 @@ static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd, 
	struct snd_soc_pcm_runtime *rtd = substream->private_data;

	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;

	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);

	int err = 0;

	int err = 0, play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);



	switch (cmd) {

	case SNDRV_PCM_TRIGGER_START:

	case SNDRV_PCM_TRIGGER_RESUME:

	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:

		if (!mcbsp_data->active++)

			omap_mcbsp_start(mcbsp_data->bus_id);

		mcbsp_data->active++;

		omap_mcbsp_start(mcbsp_data->bus_id, play, !play);

		break;



	case SNDRV_PCM_TRIGGER_STOP:

	case SNDRV_PCM_TRIGGER_SUSPEND:

	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:

		if (!--mcbsp_data->active)

			omap_mcbsp_stop(mcbsp_data->bus_id);

		omap_mcbsp_stop(mcbsp_data->bus_id, play, !play);

		mcbsp_data->active--;

		break;

	default:

		err = -EINVAL;

CRA Git | Maintained and supported by SUSTech CRA and CCSE