ARM: dts: aspeed-g6: Add remaining UARTs (c0d3e181) · Commits · 戴 / test

arch/arm/boot/dts/aspeed-g6.dtsi

+60 −0

Original line number	Diff line number	Diff line
		@@ -28,6 +28,10 @@
		i2c13 = &i2c13;
		i2c14 = &i2c14;
		i2c15 = &i2c15;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		serial5 = &vuart1;
		serial6 = &vuart2;
		@@ -326,6 +330,20 @@
		status = "disabled";
		};

		uart1: serial@1e783000 {
		compatible = "ns16550a";
		reg = <0x1e783000 0x20>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
		resets = <&lpc_reset 4>;
		no-loopback-test;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
		status = "disabled";
		};

		uart5: serial@1e784000 {
		compatible = "ns16550a";
		reg = <0x1e784000 0x1000>;
		@@ -513,6 +531,48 @@
		status = "disabled";
		};

		uart2: serial@1e78d000 {
		compatible = "ns16550a";
		reg = <0x1e78d000 0x20>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
		resets = <&lpc_reset 5>;
		no-loopback-test;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
		status = "disabled";
		};

		uart3: serial@1e78e000 {
		compatible = "ns16550a";
		reg = <0x1e78e000 0x20>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
		resets = <&lpc_reset 6>;
		no-loopback-test;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
		status = "disabled";
		};

		uart4: serial@1e78f000 {
		compatible = "ns16550a";
		reg = <0x1e78f000 0x20>;
		reg-shift = <2>;
		reg-io-width = <4>;
		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
		resets = <&lpc_reset 7>;
		no-loopback-test;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
		status = "disabled";
		};

		i2c: bus@1e78a000 {
		compatible = "simple-bus";
		#address-cells = <1>;

Admin message